NavPod GP1170-05 Pre-cut SystemPod for Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments Boat Outfitting

GP1170-05 SystemPod Pre-cut for Raymarine es127/es128 2 instruments for 9.5" wide protection

Instrument cut-out: 3.6 holes "

The NavPod GP1170 series for 9.5" guard, SystemPods allow you to mount several electronic parts in a single NavPod It is a good way to reduce the height of a system. mount a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller or VHF mic. It is best to mount a SystemPod on a single curvature AngleGuards.

High Gloss Material

NavPods are made with a custom co-extruded ABS material We use the best UV resistant material that provides a high gloss white finish that. Corresponds to current improvements in gel-coated fiberglass that include thicker material that improves strength and
provides better rigidity.structural.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent waterproof seal between the front and rear of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper screws have deeper sockets for the screws. For Gen3, we providetamper-proof nickel and chrome stainless steel The manufacturing process
- Large gauge thermoforming is considered an art since many processes
  come into play. begins with the design and development of the
  tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is accustomed to centers to produce quality tools with
  precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPosds Gen3.
Fish Finder‚·ChartplotterSystemPods is used to install multiple electronic devices. in a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also install an autopilot, instrument, stereo controller or VHF microphone. It is best to install SystemPod on AngleGuards Single Bend.
PRODUCT ID: 59269
SKU: NVN-59269
CSKU: CWR-59269
REWRITE: 70380-navpod-gp1170-05-systempod -pre-cut-f-raymarine-es127-es128
MPN: GP1170-05
UPC: 659988110432
ASIN: B01DBG15TE
WSKU: NAVGP117005
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1170-05 pre-cut SystemPod f/Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments
NOM_EX: NAVPOD GP1170 -05 PRE-CUT SYSTEMPOD FOR RAYMARINE ES127
PTITLE: NavPod GP1170-05 Pre-Cut SystemPod for Raymarine es127/es128 and 2 instrumentsts f/9.5" Wide Guard
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1170-05 SystemPod Pre-Cut f/Raymarine es127/es128 and 2 instruments f/9.5" Wide Guard

Gtags:

GSpecs:

NavPod GP1170-05 Pre-cut SystemPod for Raymarine es127/es128 and 2 instruments f/9.5" Wide Guard Product description GP1170-05 Pre-cut SystemPod for Raymarine es127/es128 2 instruments for 9.5" wide guard

Instrument cutout: 3.6" holes

NavPod GP1170 series for 9.5" guard, SystemPods allow mounting of multiple parts Electronics in a single NavPod. This is a good way to reduce the height of a system. In addition to installing a radar or chartplotter, you may have space for an autopilot, instrument, stereo controller, or VHF mic. It is best to mount a SystemPod on single-curved AngleGuards.

The high-gloss material

NavPods are made with a cohesive acrylic cap -custom extruded
provides better natural structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing excellent sealing. between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We use all the materialstainless steel mounting bracket supplied with each NavPod. Large round head tamper screws have deeper sockets for the screws. For Gen3, we provide tamper-proof nickel and chrome stainless steel The manufacturing process
- Large gauge thermoformingManagement is considered an art since many processes go into game. It all starts with the design and development of the tooling
  . We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is accustomed to centers to produce quality tools with
  precision tolerances.
Our commitment to quality
- We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefit fromyears of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.
Fish Finder‚·ChartplotterSystemPods is used to install multiple electronic devices. in a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also install an autopilot, instrument, stereo controller or VHF microphone. It is best to install SystemPod on AngleGuards Single Bend.

Frequently Asked Questions (FAQ) about NavPod GP1170-05 Pre-Cut SystemPod for Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments Who is the NavPod?
How to describe the NavPod GP1170-05 Pre-cut SystemPod f/Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments?
Is it cut or uncut?
How or what is the editing styleof the NavPod GP1170-05 SystemPod Pre-Cut f/Raymarine es127/es128 & 2 Instruments f/9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The seal Unique waterproof, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for added security and durability. convenience, concealed wiring and cable.installation for easy access.How to describe the NavPod GP1170-05 SystemPod Pre-Cut f/Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments? Fish Finder'·ChartplotterSystemPods is used to install multiple electronic devices in a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chart plotter, you can also place an autopilot, instrument, controllerstereo or VHF microphone. on single-curvature AngleGuards. Is it cut or uncut? Wide guard? Pedestal

Save $125 when you purchase the NavPod GP1170-05 SystemPod pre-cut for Raymarine es127/es128 and 2 f/9.5" Wide Guard instruments for only $404 at NVN Marine! Same day shipping before 3:00 p.m. NavPod GP1170-05 Pre-cut SystemPod for Raymarine es127/es128 and 2 instruments f/9.5" Wide Guard Technical specifications

Type:
Boat equipment | Display Media

Supplier:
NavPod

Weight:
7.5 lbs

Cut/Uncut:
Couped

Mounting style:
Pedestal

NavPod GP1170-05 Pre-Cut SystemPod for Raymarine es127/es128 and User Reviews for 2 f/9.5" Wide Guard InstrumentsNavPod GP1170-05 Pre-Cut SystemPodcut out f/Raymarine es127/es128 and 2 instruments f/9.5" Wide Guard Shipping and Returns

Shipping Weight:
7, 5 lb

Box sizes:
6.00 (h) x 12.00 (w) x 24, 00 (l)

Cubic feet:
1728.0

Returnable:
Yes

For detailed shipping terms, please review our shipping policy and you can find our return and refund policy here.

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Weight:	7.5 lbs
Cut/Uncut:	Couped
Mounting style:	Pedestal

Shipping Weight:	7, 5 lb
Box sizes:	6.00 (h) x 12.00 (w) x 24, 00 (l)
Cubic feet:	1728.0
Returnable:	Yes