NavPod GP1170 SystemPod Uncut f/9.5" Stand protectors Boat Outfitting

PART #:	GP1170
L x H x D:	N/A

NavPod protects your electronic devices in harsh conditions

Uncut NavPods allow you to choose your own layout or mount electronics which the NavPod does not do. I do not provide a pre-cut for. The face of the NavPod can easily be cut with a "Rotozip". during cutting. This eliminates any melting of the plastic material. It is also important to note that when selecting a possible uncut NavPod, the pr measurement.The depth indicated in the map is generally outside the measurements. Actual internal clearance can be reduced by curvature of the design or molded indentations for the mounting system. This can reduce overall and should be taken into account when determining actual available depth clearance.

Waterproof silicone seal
Prevents rain and spray salt water electrical connections on the back of the electronics

Tamper proof
Special clips and key are included that provide security and convenience for leaving electronics on board

Concealed wiring
No loose wires are exposed to corrosion and UV damage

Clean installation
The clean look of flush mounting. Mount your display where you can best see and reach it.

Pre-cut models
Supplied with a flush mounting kit, which includes the specific gasket and mounting hardware assembly for yourelectronic devices. if not supplied by the manufacturer with the unit.

This is a good way to reduce the height of the system. In addition to installing a radar or chart plotter, you can also leave room for autopilots, instruments, stereo controls, or VHF microphones. It is best to install SystemPod on AngleGuards Single Bend.
PRODUCT ID: 16260
SKU: NVN-16260
CSKU: CWR-16260
REWRITE: 27371-navpod-gp1170-systempod-uncut-f-9-5-pedestal-guards
MPN: GP1170
UPC: 659988102741
ASIN: B000K2IIWK
WSKU: NAVGP1170
SSKU:
KSKU: NPDGP1170
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards
EX_NAME: NAVPOD GP1170 SYSTEMPOD UNCUT USABLE FACE 20.77" W 9.5" Pedestal Guards
TYPE: Boat Outfitter | Display Stands
SELLSEUR: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod SystemPod GP1170 for 9.5" Wide Guard

Gtags:

GSpecs:

NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards Product Description

PART #:	GP1170
Description:	Uncut (usable face = 20.77"W x 9.64 "h)
L x H x D:	N/A

NavPod protects your electronic devices in harsh conditions

Uncut NavPods are for you choose your own layout or for mounting electronic devices for which NavPod does not provide pre-cutting. The face of the NavPod can easily be cut with a "Rotozip". This is a small, handheld router-style cutter that shreds material while cutting. eliminates any melting of the plastic material. It is also important to note that whenWhen selecting a possible uncut NavPod, the depth measurement shown in the table is overall off the measurements. Actual internal clearance may be reduced by curvature of the design or molded indentations for the mounting system. This can reduce overall and should be taken into account when determining actual available depth clearance.

Waterproof silicone seal
Prevents rain and spray salt water electrical connections on the back of the electronics

Tamper proof
Special clips and key are included that provide security and convenience for leaving electronics on board

Concealed wiring
No loose wires exposed to corrosion and UV damage

Clean installation
The clean look of recessed mounting. Mount your screen where you can best see and reach it.

Pre-cut models
Supplied with a mounting kite recessed, which includes the specific gasket and mounting hardware for your electronic devices. if not supplied by the manufacturer with the unit.

This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also leave room for autopilots, instruments, stereo controllers or VHF microphones. It is best to install SystemPod on AngleGuards Single Bend.

NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards Related ProductsNavPod Stanchion Kit SK135 - For all SailPods and most SystemPods
NavPod AG126 Pedestal Guard
NavPod SG10 Protection Pedestal Guard
NavPod AG127 Pedestal Guard
NavPod AG118 Pedestal Guard
NavPod AG27 9.5" Wide AngleGuard - Double Curvature - 1" Diameter
NavPod AG18 9.5" Wide AngleGuard - Single Bend - 1" Diameter

Frequently Asked Questions(FAQ) about NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards Who is the NavPod?
How to describe the NavPod GP1170 SystemPod Uncut f/9.5" Pedestal Guards?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1170 SystemPod Uncut f/9.5" Stand Guards?
What is the size of usable stand product face ?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available. Features of all NavPods include waterproof silicone seal, tamper-evident clips for added security and convenience, concealed wiring and clean installation for easy access How to Describe NavPod GP1170 SystemPod Uncut Pedestal Guards. f/9.5"? It's a good wayto reduce the height. of the system. In addition to installing a radar or chart plotter, you can also leave space for autopilots, instruments, stereo controllers or VHF microphones. It is best to install the SystemPod on single-curvature AngleGuards. Is it cut or uncut? How to mount or what is the mounting style of the NavPod GP1170 SystemPod Uncut f/9.5" Stand Guards? PedestalWhat is the usable surface area size of the product? 20.75"W x 9.625"H

Save $94 when you purchase the NavPod GP1170 SystemPod Uncut f/9.5" Stand Protectors for only $415 b> at NVN Marine! Same day shipping before 3 p.m. NavPod GP1170 SystemPod Uncut f/9.5" Technical specifications

Type:	Boat equipment \| Display mounts
Vendor:	NavPod
Weight:	9.8 lbs
Usable face:	20.75" L x 9.625 "H
Mounting Style:	Pedestal
Cut/Uncut:	Uncut

NavPod GP1170 SystemPod Uncut f/9.5" Protections Cradle User ReviewsNavPod GP1170 SystemPod Uncut f/9.5" Cradle Protectors Shipping & Returns

Shipping Weight:	9.8lb
Box sizes:	8.00 (h) x 17.00 (w) x 24.00 (w)
Cubic feet:	3264.0
Returnable :	Yes