NavPod GP1170-09 SystemPod pre-cut for Raymarine a95/a97/a98 and 4 f/9.5" Wide Guard instruments Boat Outfitting

GP1170-09 Pre-cut SystemPod for Raymarine a95/a97/a98 and 4 instruments for 9.5" wide protection

Instrument cut-out size: b> 3.6" hole

The NavPod GP1170 series for 9.5" guard, SystemPods allow you to mount several electronic parts in a single NavPod It is a good way to reduce the height of. a system In addition to mounting a radar or chart plotter, you may have room for an autopilot, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on AngleGuards. unique curvature.

The glossy material

NavPods are made with custom co-extruded ABS material We use the best UV resistant material. which provides a high gloss white finish that matches the thicker gel coated fiberglass material which improves strength and provides better structural rigidity.

The joint.Waterproof

All NavPods are manufactured with a dual seal system providing an excellent waterproof seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screwses. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a brilliant finish.neat and durable. We will deliver on our commitment by now offering a 10-year warranty on all NavPod Gen3.

Instrument cutout size: 3.6 inch hole, used for the NavPod GP1170. 9.5-inch protective cover series, SystemPods can fit multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also accommodate autopilots, instruments, stereo controllers or VHF microphones. SystemPod is best installed on single-bend AngleGuards. Custom co-extruded acrylic die-cast ABS material. Gen3 improvements now include thicker materials to increase strength and provide better structural rigidity. , Waterproof seal, all NavPods are manufactured with a double seal system, which ensures excellent sealingbetween the front and rear of the NavPod, protecting your vessel's electronic products. NavPods can withstand the toughest wet sea rowing conditions. Gen3 improvements include thicker exterior silicone gaskets for a better fit. Now the thickness of the EPDM inner seal has increased by 50% and, like many rubber compounds, it will not be affected by "compression deformation". The NavPod wrench of the large round head tamper-proof screw has a deeper socket and has better holding capacity than the previous screw when tightening.g. It all starts with the design and development of the tool. .
PRODUCT ID: 59263
SKU: NVN-59263
CSKU: CWR-59263
REWRITE: 70374-navpod-gp1170-09-systempod-pre-cut-f-raymarine-a95-a97- a98
MPN: GP1170-09
UPC: 659988110203
ASIN: B082B8RN1Y
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU :
NOM: NavPod GP1170-09 Pre-cut SystemPod f/Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard
EX_NAME: NAVPOD GP1170-09 PRE-CUT SYSTEMPOD FOR RAYMARINE A95 A97
PTITRE : NavPod GP1170-09 SystemPod pre-cut f/Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1170-09 SystemPod Pre-Cut f/Raymarine a95 /a97 /a98 & 4Instruments f/9.5" Wide Guard

Gtags:

GSpecs:

NavPod GP1170-09 SystemPod pre-cut for Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard Product description GP1170-09 SystemPod pre-cut for Raymarine a95/a97/a98 and 4 instruments for 9.5" Wide protection

Instrument cutout size: 3.6" hole

NavPod GP1170 series for 9.5" protection , SystemPods are for mounting multiple electronic parts in a NavPod. It's a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for one. autopilot, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on a single curvature AngleGuards.

The High Gloss Material

NavPods are made with custom co-extruded ABS material with acrylic cap We use the best UV resistant material that provides a high gloss white finish.ui matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural real rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all mounting hardwarestainless steel supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide Nickel-Chrome Plated Stainless Steel Tamper Proof Combination Security Screws.with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the besttheir waterproof enclosure possible for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all NavPod Gen3.

Instrument cutout size: 3.6 inch hole, used for the NavPod GP1170. 9.5 inch protective cover series, SystemPods can install multiple electronic devices in one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also accommodate autopilots, instruments, stereo controllers or VHF microphones. SystemPod is best installed on single-bend AngleGuards. Custom co-extruded acrylic die-cast ABS material. Gen3 upgrades now include materialsthicker to increase strength and provide better structural rigidity. , Waterproof Seal, All NavPods are manufactured with a double seal system, which ensures an excellent seal between the front and back of the NavPod, protecting your vessel's electronic products. NavPods can withstand the toughest wet sea rowing conditions. Gen3 improvements include thicker exterior silicone gaskets for a better fit. Now the thickness of the EPDM inner seal has increased by 50% and, like many rubber compounds, it will not be affected by "compression deformation". The NavPod wrench of the large round head tamper-proof screw has a deeper socket and has better holding capacity than the previous screw when tightening. It all starts with the design and development of the tool. .

Frequently asked questions (FAQ) about the NavPod GP1170-09SystemPod pre-cut for Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod GP1170-09 SystemPod pre-cut f/Raymarine a95/a97/a98 and 4 instruments f /9.5" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1170-09 SystemPod Pre-Cut f/Raymarine a95/a97/a98 & 4 Instruments f/9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality build and attractive design make the housing The best-built instrument ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamperpro.de fixings for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP1170-09 SystemPod Pre-Cut f/Raymarine a95/a97/a98 & 4 Instruments f/9.5" Wide Guard? Thereinstrument cutout size: 3.6 inch hole, used for NavPod GP1170 series of 9.5 inch protective cover, SystemPods can install multiple electronic devices in one NavPod. to reduce the height of the system. In addition to installing a radar or chart plotter, you can also install autopilots, instruments, stereo controllers or VHF microphones. It is best to install the SystemPod on a custom co-extruded acrylic die-cast ABS material. Gen3 improvements now include thicker materials to increase strength and provide better structural rigidity. Waterproof seal, all NavPod are manufactured with a double seal system, which provides an excellent seal between the front and back. NavPod, we protect your ship's electronic products. The NavPod can withstand rowing conditions bymost difficult wet seas. Gen3 improvements include thicker exterior silicone gaskets for a better fit. Now the thickness of the EPDM inner seal has increased by 50% and, like many rubber compounds, it will not be affected by "compression deformation". The NavPod key of the large round head tamper-proof screw has a deeper socket and has better holding capacity than the previous screw when tightening. It all starts with the design and development of the tool. .Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod GP1170-09 SystemPod Pre-Cut f/Raymarine a95/a97/a98 & 4 Instruments f/9.5" Wide Guard? Pedestal

Save $117 when you purchase the NavPod GP1170-09 Pre-Cut SystemPod f/Raymarine a95/a97/a98 and 4 f/9.5" Wide Guard Instruments for only $412 from NVN Marine! Same day dispatch before 3 p.m. NavigateionPod GP1170-09 SystemPod pre-cut f/Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard Technical specifications

Type:	Boat Equipment \| Display Stands
Seller:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

NavPod GP1170-09 SystemPod pre-cut f/Raymarine a95/a97/a98 and 4 instruments f/9.5" Wide Guard User ReviewsNavPod GP1170 -09 Pre-Cut SystemPod for Raymarine a95/a97/a98 and 4 f/9.5" Instruments Wide Guard Shipping & Returns

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.