Navpod GP1170-20 SystemPod for Simrad GO12-XSE Marine Navigation & Instruments
NAVGP117020 SystemPod
Model: GP1170-20- Pre-cut SystemPod for Simrad GO12 XSE / B&G Vulcan 12R and 2 inst. (3.6" holes for 9.5" wide protection
SystemPods are intended for mounting radar or chartplotter and instruments together on the bar. Navigation at your fingertips. "Where do you need it? When you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.
It is best to mount a SystemPod on a single-curvature AngleGuard.
Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. More structural rigidityIf it is higher, the less flexion there is during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The joint cowill continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. The large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.
Specifications| Global | 11.88, 23.25, 6.42 |
| Usable side | 9.64, 20.77, 5.25 |
| Maximum cutout | 9.5, 20.75 |
NAVGP117020 SystemPod
Model: GP1170-20- Pre-cut SystemPod for Simrad GO12 XSE / B&G Vulcan 12R and 2 inst. (3.6" holes for 9.5" wide protection
SystemPods are intended for mounting radar or chartplotter and instruments together on the bar. Navigation at your fingertips. "Where do you need it? When you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.
It is best to mount a SystemPod on a single-curvature AngleGuard.
Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This materialthicker allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod Wrench for better holding power when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.
Specifications| Global | 11.88, 23.25, 6.42 |
| Usable side | 9.64, 20.77, 5.25 |
| Maximum cutout | 9.5, 20.75 |
Save $330 when you purchase the Navpod GP1170-20 SystemPod for Simrad GO12-XSEfor only $199 at NVN Marine! Same day dispatch before 3 p.m. Navpod GP1170-20 SystemPod for Simrad GO12-XSE Technical Specifications
| Type: | Marine Navigation & Instruments | Instruments |
|---|---|
| Vendor: | NavPod |
| Weight: | 7.0 lbs |
| Shipping Weight: | 7.0 lbs |
|---|---|
| Box sizes: | (h) x (l) x (l) |
| Cubic Feet: | 0 |
For detailed shipping terms, please see our ex policyshipping and you can find our return and refund policy here.
- Navpod GP1170-16 SystemPod for Simrad NSS12 evo3
- NavPod GP1170-15 Pre-cut SystemPod f/Simrad NSS12 evo/B&G Zeus 12 and 2 f/9.5" Wide Guard instruments
- NavPod GP1170-14 SystemPod pre-cut for Raymarine eS95/eS97/eS98 and 4 instruments (3.6" hole) f/9.5" wide guard
- NavPod GP1170-12 Pre-cut SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments
- NavPod GP1170-09 SystemPod pre-cut for Raymarine a95/a97/a98 and 4 f/9.5" Wide Guard instruments
- Navpod GP1170-07 SystemPod for Garmin GPSMPA
- NavPod GP1170-06 Pre-cut SystemPod for Garmin 1020/1020xs/1040xs and 2 f/9.5" Wide Guard instruments
