NavPod GP1170-12 Pre-cut SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments Boat Outfitting

GP1170-12 Pre-cut SystemPod for Garmin GPSMAP 7412/7412xsv/7612/7612xsv and 2 instruments

Instrument cutout: 3.6" holes

NavPod GP1170 Series for Guard 9.5", SystemPods allow you to mount several electronic components in a single NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you may have room for an autopilot, instrument, stereo controller, or VHF mic.
It's best to mount a SystemPod on a single-curvature AngleGuards .

High Gloss Material

NavPods are made with custom co-extruded p050.20ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better rigiditystructural.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent waterproof seal between the Front and rear of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for increased ma capacitymaintained during tightening as the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, we are confident that you will benefit from anproblem-free service.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...
PRODUCT ID: 59258
SKU: NVN-59258
CSKU: CWR-59258
REWRITE: 70369-navpod-gp1170- 12-systempod-pre -cut-f-garmin-gpsmap-7412
MPN: GP1170-12
UPC: 659988110036
ASIN: B00YAZHZZE
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1170-12 SystemPod Pre- Coupe for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments
EX_NAME: NAVPOD GP1170- 12 SYSTEMPOD PRE-CUT FOR GARMIN 7412
PTITLE: NavPod GP1170-12 SystemPod Pre-Cut f/Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments
TYPE: Boat fitting | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICSNAVPOD GP1170-12 systempod pre-cut f/garmin gpsmap,reg 7412/7412xsv/7

Gtags:

GSpecs:

GP1170-12 Pre-cut SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments

Instrument cutout:

High Gloss Material

NavPods are made with custom co-extruded p050.20ABS material. We use the best UV resistant material that provides a high gloss white finish that matches coated fiberglassand frost. Gen3 improvements now include thicker gauge material that improves strength and provides greater structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware supplied with eachue NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for security.rity combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best waterproof case possiblefor marine electronics. With now two decades of experience under our belt, we are confident that you will benefit from years of trouble-free service.

SystemPods are used to install multiple electronic devices into one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chart plotter,...

Frequently Asked Questions (FAQ)About the NavPod GP1170-12 SystemPod pre-cut for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments Who is the NavPod?
How to describe the Pre-Cut NavPod GP1170-12 SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments?
Is it cut or uncut?
How to mount or what is the mounting style of Pre-Cut NavPod GP1170-12 SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv & 2 Instruments?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar orGPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP1170-12 SystemPod Pre-Cut f/Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv & 2 instruments? SystemPods are used to install multiple electronic devices into a NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter,...Is it cut or not? Cut How to mount or what is the mounting style of NavPod GP1170-12 SystemPod Pre-Cut f/Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments? Pedestal

Save $117 when you purchase the NavPod GP1170-12 SystemPod pre-cut for Garmin GPSMAP 7412/7412xsv/7612/7612xsv and 2 instrumentsfor only $412 from NVN Marine! Same day dispatch before 3 p.m. NavPod GP1170-12 Pre-Cut SystemPod for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 Instruments Technical Specifications

Type:
Boat Outfitter | Display Media

Supplier:
NavPod

Cut/Uncut:
Cutted

Edit Style:
Pedestal

NavPod GP1170-12 SystemPod pre-cut for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments User reviewsNavPod GP1170-12 SystemPod pre-cut for Garmin GPSMAP 7412 / 7412xsv / 7612 / 7612xsv and 2 instruments Shipping & Return
For detailed shipping policy, please see our shipping policy and you can find our policye returns and refunds here.

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal