NavPod GP1174 Pre-cut SystemPod f/Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide Guard instruments Boat Outfitting

GP1174 Pre-cut SystemPod for Raymarine c125 / c127 / e125 / e127 and 2 instruments for 9.5" wide protection

Instrument cut-out size: b> 3.6" hole

NavPod GP1170 series for 9.5" guard, SystemPods allow you to mount several electronic components in a single NavPod. This is a good way to reduce the height of one. system In addition to mounting a radar or chart plotter, you may have room for an autopilot, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on AngleGuards. unique curvature.

The glossy material

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for better caholding strength when tightening than the previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefitEnjoy years of trouble-free service and a durable, glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all Gen3 NavPods.

For the 9.5-inch Guard, Sail SystemPods can mount multiple electronic devices in a NavPod. . This is a good way to reduce the height of the system.
PRODUCT ID: 59265
SKU: NVN-59265
CSKU: CWR-59265
REWRITE: 70376-navpod-gp1174-systempod-pre-cut-f-raymarine-c125
MPN: GP1174
UPC: 659988107463
ASIN: B00YAZI4E0
WSKU: NAVGP1174
SSKU:
KSKU: NPDGP1174
GSKU:
MSKU:
LSKU:
NAME: Pre-cut NavPod GP1174 SystemPod f/Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide Guard instruments f/Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide Guard instruments
TYPE: Boating equipmentto | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1174 SystemPod Pre-Cut f/Raymarine c125 / c127 / e125 / e127 & 2 Instruments f/9.5" Wide Guard

Gtags:

Boat
Automobile

GSpecs:

NavPod GP1174 SystemPod pre-cut for Raymarine c125 / c127 / e125 / e127 and 2 instruments f/9.5" Wide Guard Product description GP1174 SystemPod pre-cut for Raymarine c125 / c127 / e125 / e127 and 2 instruments for 9.5" Wide Protection

Instrument cutout size:3.6" hole

NavPod GP1170 series for 9.5" protection, SystemPods are for mounting multiple electronic parts in a NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for a pilot. automatic, instrument, stereo controller or VHF mic.
It is best to mount a SystemPod on a single curvature AngleGuards.

The High Gloss Material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that offers a white finish.ès gloss which matches the gel coated fiberglass. Gen3 improvements now include thicker gauge material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use everythingstainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We areare committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all Gen3 NavPods.

For the 9.5-inch Guard, Sail SystemPods can mount multiple electronic devices in a NavPod. . This is a good way to reduce the height of the system.

Frequently Asked Questions (FAQ) about the NavPod GP1174 Pre-Cut SystemPod for Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide instruments Guard Who is the NavPod?
How to describe the NavPod GP1174 SystemPod pre-cut f/Raymarine c125 / c127 / e125 / e127 and 2 instruments f/9.5" Wide Guard?
Is it cut or uncut ?
How to mount or what is the mounting style of the NavPod GP1174 SystemPod Pre-Cut f/Raymarine c125 / c127 / e125 / e127 & 2 Instruments f/9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The Unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal and tamper-proof fasteners for added security and safety. Convenience, concealed wiring and clean installation for easy access How to describe NavPod GP1174 Pre-Cut SystemPod f/Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide Guard instruments? For the 9.5 inch guard, Sail's SystemPods can fit multiple electronic devices into one NavPod. It's a good way to reduce the height of the system. Is it cut or uncut ul> How to mount or what is the mounting style of NavPod GP1174 SystemPod Pre-Cut f/Raymarine c125 / c127. / e125 / e127 and 2 f/9.5" Wide Guard instruments? Pedestal

Save $98 when you purchase the NavPod GP1174 SystemPod pre-cut for Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide Guard instrumentsfor only $431 at NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod GP1174 SystemPod for Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" instruments Wide Guard Technical. Specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Cut/Uncut:	Cut
Edit Style:	Pedestal

NavPod GP1174 SystemPod Pre-cut for Raymarine c125 / c127 / e125 / e127 and 2 f/9.5" Wide instruments Guard User ReviewsNavPod GP1174 SystemPod Pre-Cut for Raymarine c125/c127/e125/e127 and 2 instrumentsf/9.5" Wide Guard Return