Navpod GP2080-21 SystemPod for Simrad GO9 and GO9-XSE Marine Navigation & Instruments

NAVGP208021 SystemPod

Model: GP2080-21

Pre-cut SystemPod for Simrad GO9 & GO9 XSE / B&G Vulcan 9 & Vulcan 9R and 2 inst. (3.6" holes for 12" wide protection

SystemPods allow radar or chart plotter and instruments to be mounted together on the helm. Navigation at your fingertips. "Where do you need it? When you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. More rigiditystructural strength is high, the less flexion there is during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The janointed will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening.n screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.

Specifications

Clock
Height	11.625
Width	19.625
Depth	6.875
Usable side
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5

Navpod GP2080-21 SystemPod for Simrad GO9 and GO9-XSE Product Description

NAVGP208021 SystemPod

Model: GP2080-21

Pre-cut SystemPod for Simrad GO9 & GO9 XSE / B&G Vulcan 9 & Vulcan 9R and 2 inst. (3.6" holes for 12" wide protection

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidityTHE. This thicker material allows for greater sealing. The better the structural rigidity, the less flexing when tightening and the greater the uniformity or pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important whenyou will need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.

Specifications

Clock
Height	11.625
Width	19.625
Depth	6.875
Usable area
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5

Save $330 when you purchase the Navpod GP2080-21 SystemPod for Simrad GO9 and GO9-XSEfor only $199 from NVN Marine Same day shipping before 3pm. Technical specifications

Type:	Navigation and marine instruments \| Instruments
Supplier:	NavPod
Weight:	5.0 lbs

Navpod GP2080-21 SystemPod for Simrad GO9 and GO9-XSE User reviewsteursNavpod GP2080- 21 SystemPod for Simrad GO9 and GO9-XSE Shipping and Returns

Shipping Weight:	5.0 lbs
Box sizes:	(h) x (l) x (l)
Cubic Feet:	0

For detailed shipping policy, please review our shipping policy and you can find our return and refund policy here.