Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610 Marine Navigation & Instruments

NAVPOD GP208031 SystemPod

Model: GP2080-31

Pre-cut SystemPod for Garmin GPSMAP 8410xsv/8610xsv and 2 inst. (3.6? hole), for 12? wide protection

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips? "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard,or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is an import and when you will need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel and Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a little style!

Commitment to Quality — We stand by our commitment by offering a 10 year warranty on all productsnew NavPod Gen3.

Specifications

Overall
Height	11,625
Width	19.625
Depth	6.875
Usable face
Height	9.125
Width	17
Depth	5.75
Maximum cutting
Height	9.5
Width	17.5

Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610 Product Description

NAVPOD GP208031 SystemPod

Model: GP2080-31

Pre-cut SystemPod for Garmin GPSMAP 8410xsv/8610xsv and 2 inst. (3.6? hole), for 12? wide protection

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips? "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-sealed waterproof seal, NavPods protect your electronic devices from the harshest offshore sailing conditions.hard and damp. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity — Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed toto withstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel and Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws offer security combined with a bit of style!

Commitment to quality —We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s.

Specifications

Overall
Height	11,625
Width	19,625
Depth	6.875
Usable surface
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5

Save $330 when you purchase the Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610for only $199 from NVN Marine! Same day dispatch before 3 p.m. Navpod GP2080-31SystemPod for Garmin GPSMAP 8410/8610 Technical Specifications

Type:	Navigation & Marine Instruments \| Instruments
Vendor:	NavPod
Weight:	5.0 lbs

Navpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610 User ReviewsNavpod GP2080-31 SystemPod for Garmin GPSMAP 8410/8610 Shipping & Returns

Shipping Weight:	5.0 lbs
Box sizes:	(h) x (l) x (w)
Cubic feet:	0

For detailed shipping terms, please review our Shipping Policy and you can find our Return and Refund Policy here.