Navpod GP2170-07 SystemPod for Garmin GPSMAP 1020/1040 Marine Navigation & Instruments
NAVGP217007 SystemPod
Model: GP2170-07- Pre-cut SystemPod for Garmin GPSMAP 1242xsv/1222xsv/1222 and 2 inst. (3.6? holes) for 12? broad protection
SystemPods allow radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips. Where you need it, when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.
It is best to mount a SystemPod on a single-curvature AngleGuard.
Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity,the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability and durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to compression like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue towe work.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.
SpecificationsOverall | |
Height | 11.88 |
Width | 23.25 |
Depth | 6.42 |
Usable | |
Highur | 9.64 |
Width | 20.77 |
Depth | 5.25 |
Maximum cutout | |
Height | 9.5 |
Width | 20.75 |
NAVGP217007 SystemPod
Model: GP2170-07- Pre-cut SystemPod for Garmin GPSMAP 1242xsv/1222xsv/1222 and 2 inst. (3.6? holes) for 12? broad protection
SystemPods allow radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips. Where you need it, when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.
It is best to mount a SystemPod on a single-curvature AngleGuard.
Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker materials allows greater sealing. The better the structural rigidity, the less flex there is when tightening and the more uniform the pressure is on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to compression like many rubber compounds. This is important when you need to open the SystemPod in the futureto repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof, nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all the new NavPods Gen3.
SpecificationsOverall | |
Height | 11.88 |
Width | 23.25 |
Depth | 6.42 |
Usable | |
Height | 9.64 |
Width | 20.77 |
Depth | 5.25 |
Maximum cutting | |
Height | 9.5 |
Width | 20.75 |
Save $330 when you purchase the Navpod GP2170-07 SystemPod for Garmin GPSMAP 1020/1040 for only $199 at NVN Marin! Same day dispatch before 3 p.m. Navpod GP2170-07 SystemPod for Garmin GPSMAP 1020/1040 Technical Specifications
Type: | Navigation & Marine Instruments | Instruments |
---|---|
Vendor: | NavPod |
Weight: | 5.0 lbs |
Shipping Weight: | 5.0 lbs |
---|---|
Box sizes: | (h) x (l) x (l) |
Cubic feet: | 0 |
- NavPod GP2170-06 Pre-cut SystemPod for Garmin 1020/1020xs/1040xs and 2 f/12" Wide Guard instruments
- NavPod GP2170-05 Pre-cut SystemPod for Raymarine es127/es128 and 2 f/12" Wide Guard instruments
- NavPod GP2170-04 Pre-cut SystemPod for Raymarine a125/a127/a128 and 2 f/12" Wide Guard instruments
- NavPod GP2170 Grand Prix Series Uncut Pedestal Guards f/12"
- NavPod GP2088 Pre-cut SystemPod for Garmin 820/820xs/840xs and 2 f/12" Wide Guard instruments
- NavPod GP2082 SystemPod pre-cut for Raymarine c125/c127/e125/e127 and 2 f/12" Wide Guard instruments
- NavPod GP2081 Pre-Cut SailPod for Raymarine C90W & E90W 2 ST60s f/12" Guard