NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3 Boat Outfitting

PP4403 Pre-Cut Powerpod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3

PP4400 series, PowerPods are a better option than stand mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the hood or at the rear of the cockpit table, inespecially on dual wheel boats.

The shiny material

NavPods are manmade with custom co-extruded acrylic coated ABS material . We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject toto a "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all staNo steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use C programs.AO such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Compared with When installing in a rack, the PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in...
PRODUCT ID: 59225
SKU: NVN-59225
CSKU: CWR-59225
REWRITE: 70336-navpod-pp4403-powerpod-pre-cut-f - lowrance-hds-7-gen2
MPN: PP4403
UPC: 659988107432
ASIN: B00YAZHRJS
WSKU: NAVPP4403
SSKU:
KSKU: NPDPP4403
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3
EX_NAME: NAVPOD PP4403 PRE-CUT POWERPOD FOR LOWRANCE HDS-7 GEN2 TOUCH
br> PTITRE: NavPod PP4403 Pre-Cut PowerPod f/Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod PP4403 PowerPod Pre-Cut f/Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3

Gtags:

GSpecs:

NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3 Product Description PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3

The PP4400 Series , PowerPods are a better option than stand mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect formounting on a flat surface. Perhaps under the dodger or at the rear of the cockpit table especially on twin wheel boats.

The high gloss material

The NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with aprecisely improved flush. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We have the chance tohave experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Compared to rack installation , PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in...

Frequently Asked Questions (FAQ) about NavPod PP4403 Pre-Cut PowerPod f/Lowrance HDS-7 Gen2 Touch/HDS - 7 Gen3 Who is the NavPod?
How to describe the NavPod PP4403 Pre-Cut PowerPodf/Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3?
Is it cut or uncut?
How or what is the mounting style of the NavPod PP4403 PowerPod Pre-Cut f/Lowrance HDS- 7 Gen2 Touch/HDS-7 Gen3?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features on all Navpods include waterproof silicone watJoint, tamper-proof fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for une installation in... Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP4403 PowerPod Pre-Cut f/Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3? Dash

Save $68 when you purchase the NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3 for only $301from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4403 Pre-Cut PowerPod f/Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3 Technical Specifications

Type:	Boat Equipment \| Display Stands
Seller:	NavPod
Cut/Uncut:	Cut
Edit Style:	Pulled

NavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/HDS-7 Gen3 User ReviewsNavPod PP4403 Pre-Cut PowerPod for Lowrance HDS-7 Gen2 Touch/ HDS-7 Gen3 Shipping & Returnour