Sale!
NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98
NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98

NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98

$86

SKU: NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98
Category:

NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98 Boat Outfitting

PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98

PP4900 series, PowerPods are a better option than rack mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are perfect for mounting on a flat surface. Perhaps under the hood or aft of the cockpit table, especially onr twin wheel boats.

The shiny material
  • NavPods are made with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal
  • All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "compressiondefined" as many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws
  • We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
  • Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
  • We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we're confident you'll have years of trouble free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.


Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59322
SKU: NVN-59322
CSKU: CWR-59322
REWRITE: 70433-navpod-pp4900-01-powerpod-pre-cut-f- Raymarine-es97-es98
MPN: PP4900-01
UPC: 659988110876
ASIN: B01DBH96U8
WSKU: NAVPP490001
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4900-01 PowerPod Pre-Cut f/Raymarine eS97/eS98
NAME_EX: NAVPOD PP4900-01 POWERPOD PRE-CUT FOR RAYMARINE ES95/97
PTITLE: NavPod PP4900- 01 PowerPod Pre-Cut f/Raymarine eS97/eS98
TYPE: Boat Outfitting | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4900-01 PowerPod Pre-Cut f/Raymarine eS97 /eS98

Gtags:

GSpecs:

NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98 Product Description PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98

PP4900 series, PowerPods are a better option than mounting on support. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are ideal for mounting on a flat surface.donkey. Perhaps under the dodger or aft of the cockpit table, particularly on twin wheel boats.

The high gloss material
  • NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal
  • All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with an improved flush fitD. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws
  • We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
  • Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on ingExperienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
  • We are committed to producing the best possible waterproof enclosure for marine electronics. Now with two decades of experience, we are confident you will benefit from years of trouble-free service and a long-lasting, shiny finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.


Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The last industry...

Frequently Asked Questions (FAQ) about NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98 Who is the NavPod?
How to describe the NavPod PP4900-01 Pre-Cut PowerPod f/Raymarine eS97/eS98?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4900-01 Precut PowerPod f/Raymarine eS97/eS98?
Which is NavPod Navpod is a better way? to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features on all Navpods include silicone seal. waterproof, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access How to describe the NavPod PP4900-01 PowerPod Pre-Cut f/Raymarine eS97/eS98? rack, PowerPods for Power are a betterchoice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? Cut
      How to mount or what is the mounting style of NavPod PP4900-01 PowerPod Pre-Cut f/Raymarine eS97/eS98? Dash

      Save $115when you purchase the NavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98for only $374from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4900-01 Pre-Cut PowerPod f/Raymarine eS97/eS98 Technical Specifications
      Type:

      Boat Outfitting | Display Media
      Supplier:

      NavPod
      Weight:

      6.75 lbs
      Cut/Uncut:

      Coupe
      Mounting style:

      Dashboard
      NavPod PP4900-01 PowerPod predecoupe for Raymarine eS97/eS98 User ReviewsNavPod PP4900-01 Pre-Cut PowerPod for Raymarine eS97/eS98 Shipping & Returns
      Shipping Weight:

      6 .75 lb
      Box sizes:

      9.00 (h) x 15.00 (w) x 17 .00 (l)
      Cubic feet:

      2295.0
      Returnable:

      Yes

      For detailed shipping terms , please review our Shipping Policy and You can find our Return and Refund Policy here.

Recently Viewed
Related products