NavPod PP4900 Uncut PowerPod (Usable Face = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Black Boat Outfitting

Uncut PowerPod PP4900 (Usable Face = 12.5" Width x 8" Height) (31.75 cm Width x 19.8 cm Height) - Carbon Black

PowerPods are designed for serious users. boater dynamiting offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubby or rear end.of the cockpit table, especially on twin-wheel boats.

Structural rigidity

Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand harsh conditionsmost difficult and wet offshore navigation conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to quality

We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

NAVPOD Pp4900 powerpod uncut usable surface area 12.5 inches w x 8 inches h 31 .75cm W x 19.8cm H - PowerPods in Carbon Black are specially designed for serious boatmen who blast at sea. It...
PRODUCT ID: 63958
SKU: NVN-63958
CSKU : CWR-63958
REWRITE: 75069-navpod-pp4900-powerpod-uncut-usable-face
MPN: PP4900-C
UPC: 659988112474
ASIN: B082B8X3LF
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4900 Uncut PowerPod (usable face = 12.5" width x 8" height) (31 .75 cm wide x 19.8 cm high) -Carbon Black br> PITTER: NavPod PP4900 Uncut PowerPod (Usable Face = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Black
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp4900 powerpod usable face uncut 12.5 inch l x 8 inches h 31.75 cm w
br>
Gtags:

GSpecs:

NavPod PP4900 Uncut PowerPod (usable face = 12.5" L x 8" H) (31.75 cm W x 19.8 cm H) - Carbon Black Product Description

PP4900 Uncut PowerPod ( usable face = 12.5" W x 8" H) (31.75 cm wide x 19.8 cm high) - Carbon Black

PowerPods are designed for serious boaters who sail offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for HerThey are intended to be mounted on a flat surface. Perhaps under the cubbyhole or aft end of the cockpit table, particularly on twin wheel boats.

Structural rigidity

Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This joint offerse the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell polyurethane internal seal is now 50% thick and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we crazyLet's bring tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to quality

NAVPOD Pp4900 powerpod uncut usable surface area 12.5 inches w x 8 inches h 31 .75cm W x 19.8cm H - Carbon Black PowerPods are specially designed for serious boaters who blast at sea. It...

Frequently Asked Questions Questions (FAQ) about NavPod PP4900 Uncut PowerPod (Usable Face = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Black Who is the NavPod?
How to describe the uncut NavPod PP4900 PowerPod (usable face = 12.5"W x 8"H) (31.75cm W x 19.8cm H) - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod PP4900 Uncut PowerPod ( usable surface = 12.5" width x 8" height) (31.75 cm width x 19.8 cm height) - Carbon black?
What is the size of the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. FeaFeatures of all Navpods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring, and clean installation for easy access. How to describe the Uncut NavPod PP4900 PowerPod (Usable Face = 12.5" W x 8" H) (31.75 cm W x 19.8 cm H) - Carbon Black? NAVPOD Pp4900 powerpod Uncut Usable Area 12.5" W x 8" H 31.75" W x 19.8" H - Carbon Black PowerPods are specially designed for serious boaters who blast at sea. It... Is it cut or not ? Uncut How to mount or what is the mounting style of the Uncut NavPod PP4900 PowerPod (usable face = 12.5" width x 8" height) (31.75 cm width x 19. 8 cm high) - Carbon black? DashWhat is the size of the usable surface area of the product? 12.4"L x 7.4"H

Save $104 when you purchase the NavPod PP4900 Uncut PowerPod (Usable Face = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Blackfor only $365 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP4900 PowerPod Uncut (usable face = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Black Technical Specifications

Type :	Boat outfitter \| Display supports
Provider:	NavPod
Cut/Uncut:	Uncut
Editing Style:	Stretched
Usable face:	12.4"L x 7.4"H

NavPod PP4900 Uncut PowerPod (Usable Side = 12.5"L x 8"H) (31.75cm W x 19.8cm H) - Carbon Black User ReviewsNavPod PP4900 Uncut PowerPod (Usable Side) = 12.5"L x 8"H) ) (31.75cm W x 19.8cm H) - Carbon Black Shipping & Return

For detailed shipping policy, please see our policy shipping and you can find our return and refund policy here.