NavPod PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus Z8 Boat Outfitting

PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus 8

PP5050 series, PowerPods for power supply are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the hood or in the back ofe the cockpit table, especially on twin wheel boats.

The glossy material

NavPods are made with an ABS material coated with custom co-extruded acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thickeris and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who usent CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

SailPod Precuts for Simrad NSS12evo"³ and B&GZeus"³12 , suitable for 9.5 inch wide shield SailPods for mounting a single radar or chartplotter on the helmet. Fingertip navigation. "In case of need...in case of need." Sail Pods is a smart solution with a radar or chart plotter installed on the helm, where you can easily operate and clearly see the exquisite details of the screen.
PRODUCT ID: 59227
SKU: NVN-59227
CSKU: CWR-59227
REWRITE: 70338-navpod-pp5059-powerpod-pre-cut-f-simrad-nse8-b-g-zeus
MPN: PP5059
UPC: 659988107296
ASIN: B00YAZKBSW
WSKU: NAVPP5059
SSKU:
KSKU: NPDPP5059
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus Z8
EX_NAME: NAVPOD PP5059 PRE-CUT POWERPOD for SIMRAD NSE8/B&G ZEUS Z8
PTITRE: NavPod PP5059 Pre-cut PowerPod for Simrad NSE8/B&G Zeus Z8
TYPE: Boat fitting | Display support
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS Navpod Sailpod Pre-Cut for simrad Nss12 Evo Bg Zeus 12 for 9.5" Wide Guard [Gp1200-14]

Gtags:

Boat
Automobile

GSpecs:

NavPod PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus Z8 Product Description PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus 8

PP5050 series, PowerPods for power are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are dintended to be mounted on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on twinwheel boats.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external silicone seal plusthick with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We haves fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each. incorporated into each new Gen3 product.

Pre-cut SailPods for Simrad NSS12evo"³ and B&GZeus"³12, suitable for 9.5 inch wide shield SailPods for mounting a single radar or Chartplotter on the helmet. Fingertip navigation. "In case of need...in case of need." Sail Pods is a smart solution with a radar or chart plotter installed on the helm, where you can easily operate and clearly see the exquisite details of the screen.

Frequently Asked Questions (FAQ) about NavPod PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus Z8 Who is the NavPod?
How to do it Describe the NavPod PP5059 Pre-Cut PowerPod f/Simrad NSE8/ B&G Zeus Z8?
Is it cut or not?
How to mount or what is the mounting style of Pre-cut NavPod PP5059 PowerPod f/Simrad NSE8 /B&G Zeus Z8?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best instrument enclosure ever available for the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5059 PowerPod Pre-Cut f/Simrad NSE8/B&G Zeus Z8? SailPod precuts for Simrad NSS12evo"³ and B&GZeus"³12, aFits 9.5 inch wide shield SailPods for mounting a single radar or chartplotter on the helmet. Fingertip navigation. "In case of need...in case of need." Sail Pods is a smart solution with a radar or chart plotter installed on the helm, where you can easily operate and clearly see the exquisite details of the screen. Is it cut or uncut? Cut

$114

NavPod PP5059 Pre-Cut PowerPod for Simrad NSE8/B&G Zeus Z8

$395

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Edit Style:	Dash For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.