NavPod RMX4406 RailMount Pre-cut f/Simrad NSS7 evo2 or B&G Zeus² 7 Boat Outfitting

RMX4404 RailMount Pre-Cut for Simrad NSS7 evo2 or B&G Zeus ² 7

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or a small chart plotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 9"H x 10.2"W x 6"D
Usable face: 5.6"H x 8.9"W x 3.75"D
Cutout Maximum:4.625"H x 8"W

All NavPods RailMount incluent

ABS plastic with acrylic cap
Chrome-plated stainless steel tamper-proof fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Chrome-plated stainless steel arm with swivel mount
The two sets of adapters are included for 1" or 1.25" diameter tubing

Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters on existing basic protections. Fits any 1" or 1.25"...
PRODUCT ID: 54026
SKU: NVN-54026
CSKU: CWR-54026
REWRITE: 65137-navpod-rmx4406- railmount-pre-cut- f-simrad-nss7-evo2
MPN: RMX4406
UPC: 659988108224
ASIN: B00TFWNJAC
WSKU: NAVRMX4406
SSKU:
KSKU: NPDRMX4406
GSKU:
MSKU:
LSKU:
NAME: NavPod RMX4406 Pre-Cut RailMount f/Simrad NSS7 evo2 or B&G Zeus² 7
NAME_EX: PRE-CUT NAVPOD RAILMUNT FOR SIMRAD NSS7 EVO2 / B&G ZEUS2 7
PTILE: NavPod RMX4406 Pre-Cut RailMount f/Simrad NSS7 evo2 or B&G Zeus² 7
TYPE:Boat fitting out | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RailMount RMX4406

Gtags:

GSpecs:

NavPod RMX4406 Pre-Cut RailMount for Simrad NSS7 evo2 or B&G Zeus² 7 Product Description RMX4404 Pre-Cut RailMount for Simrad NSS7 evo2 or B&G Zeus² 7

RailMount NavPods are best used for mounting a control of an autopilot, a navigation instrument or a small chart plotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 9"H x 10.2"W x 6"D
Usable face: 5.6"H x 8.9"Lx 3.75"D
Maximum cutout: 4.625"H x 8" W

All RailMount NavPods include

ABS plastic with acrylic cap
Chrome plated stainless steel tamper evident fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Chrome plated stainless steel arm with swivel bracket
Both sets of adapters are included for a tube of 1" or 1.25" diameter

Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters on existing base guards Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about the NavPod RMX4406 RailMount Pre-Cut f/ Simrad NSS7 evo2 or B&G Zeus² 7 Who is the NavPod?
How to describe the NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RMX4406 RailMount Pre-Cut f/ Simrad NSS7 evo2 or B&G Zeus² 7?
Who is NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, IP-grade workmanship and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7? Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...Is it cut or not coops? CutHow to mount or what is the mounting style of the NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7? Rail

Save $99 when you purchase the NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7 for only $440from NVN Marine! Same day dispatch before 3 p.m. NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	5.85 lbs
Mounting Style:	Rail
Cut/Uncut:	Cut

NavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7 User ReviewsNavPod RMX4406 RailMount Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus² 7 Shipping and Returns

Shipping Weight:	5.85 lbs
Box Sizes:	6.00 (h) x 10.00 (w) x 14.00 (w)
Cubic feet:	840.0
Returnable:	Yes

For detailed shipping terms, please view our ShippReturn Policy and you can find our Return and Refund Policy here.