NAVPOD RMX4400-13 Rail Mount for Furuno GP1871F Marine Navigation & Instruments

NAVPOD RMX4400-13 Railmount

Model: RMX4400-13

Pre-cut RailMount for Furuno GP1871F 7? Multi-touch GPS/WAAS Chartplotter with CHIRP and Conventional Fish Finder (fits 1? or 1.25? tubes)

RailMount NavPods are best used for rigging an autopilot control, navigation instrument or small chart plotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics without replacing the base guard.

Rail mounts are designeds for all popular standard-size instruments as well as 7- and 9-inch chartplotters.

Structural Rigidity — Gen3 improvements now include thicker gauge acrylicMagic Cap ABS material that improves resistance and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the toughest offshore sailing conditionsislands and humid. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices. The gasket will continue to do its job.

Nickel and Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a bit of style!

Specifications

Overall size
Height
in	10.5
cm	26.7
Width
in	12.5
cm	31.8
Depth
in	5.92
cm	15.0
Usable face
Height
in	6
cm	15.2
Width	8.75
cm	22.2
Depth
in	3.25
cm	8.3
Maximum cutout
Height
in	5.5
cm	14.0
Width
en	8.625
cm	21.9

NAVPOD RMX4400-13 Rail Mount for Furuno GP1871F Product Description

NAVPOD RMX4400-13 Rail Mount

Model: RMX4400-13

RailMount pre-cut for Furuno GP1871F7? Multi-touch GPS/WAAS Chartplotter with CHIRP and Conventional Fish Finder (fits 1? or 1.25? tubes)

RailMount NavPods are best used for rigging an autopilot control, navigation instrument or small chart plotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean and robust installation for electronics,without replacement of the base guard.

The rail mounts are designed for all popular standard-sized instruments as well as 7 and 9 inch chart plotters.

constructionRigidity — Gen3 improvements now include thicker acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designedto withstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The gasket will continue to do its job.

Specifications

Overall size
Height
in	10.5
cm	26.7
Width
in	12.5
cm	31.8
Depth
in	5.92
cm	15.0
Usable face
Height
in	6
cm	15.2
Width	8.75
cm	22.2
Depth
in	3.25
cm	8.3
Maximum cutting
Height
in	5.5
cm	14.0
Width
in	8.625
cm	21.9

Save $336 with the purchase of the NAVPOD RMX4400-13 Railmount for Furuno GP1871F for only $203 from NVN Marine! Same day shipping before 3 p.m. NAVPOD RMX4400-13 Rail Mount for Furuno GP1871F Technical Specifications

Type:	Marine Navigation & Instruments \| Instruments
Supplier:	NavPod

NAVPOD RMX4400-13 Railmount for Furuno GP1871F User ReviewsNAVPOD RMX4400-13 Railmount for Furuno GP1871F Shipping & Return

For detailed shipping policy, please view our shipping policy and you canfind our return and refund policy here.