NavPod RailMount GPSMAP pre-cut f/742xs 742 722xs and 722 for 1" or 1.25" tubes Boat Outfitting

Pre-cut GPSMAP RailMount for 742xs, 742, 722xs and 722, fits 1" or 1.25" tubing

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or small chartplotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics without replacing the base guard.

Rail mounts are designed for all popular standard size instruments as well as chart plotters. 7 and 9 inches.

Structural rigidity – Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger watertight seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All RailMount NavPods are manufactured with a double seal system providing excellent sealing. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with an improved flush fitiore. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

NickelChrome Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10 year warranty on all new NavPods Gen3.

The RailMount pre-cut GPSMAP for 742xs,742, 722xs and 722 fits 1 inch or 1.25 inch pipe. RailMount NavPods are best suited for installing autopilots, navigation instruments or small aircraft.
PRODUCT ID: 78025
SKU: NVN-78025
CSKU: CWR-78025
REWRITE: 89136-navpod-railmount-pre -cut-gpsmap-f-742xs-742-722xs
MPN: RMX4400-09
UPC: 659988114355
ASIN: B07TWXD55W
WSKU: NAVRMX440009
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs & 722 Fits 1" tubes or 1.25"
NAME_EX: NAVPOD RMX4400-09 RAIMOUNT PRE-CUT GPSMAP 742XS /742/722XS/722
PTITLE: Pre-cut GPSMAP NavPod RailMount f/742xs, 742, 722xs and 722 for 1" tubes or 1.25"
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
GPS or Navigation System

NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs and 722 for 1" or 1.25" tubes - RMX4400-09
GPS or navigation system
Gtags:

GSpecs:

NavPod RailMount GPSMAP pre-cut f/742xs, 742, 722xs and 722 for 1" or 1.25" tubes Product description

Pre-cut GPSMAP on rail for 742xs, 742, 722xs and 722 for 1" tubes " or 1.25 " Tubes

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or small chartplotter on an existing base of protection. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Rail mounts are designed for all instrumentation tpopular standard size as well as for 7 and 9 inch chartplotters.

Structural Rigidity – Gen3 enhancements now include a higher gauge acrylic coated ABS material that improves resistance and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All RailMount NavPods are manufactured with a double seal system providing excellent sealing. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditions et wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand by our commitment in offrant a 10-year warranty on all new Gen3 NavPods.

RailMount pre-cut GPSMAP for 742xs, 742, 722xs and 722 fits 1 inch or 1.25 inch pipe. RailMount NavPods are most suitable for installing autopilots, navigation instruments or small aircraft.

Frequently asked questions (FAQ) about the pre-cut GPSMAP NavPod RailMount f/742xs, 742, 722xs and 722 for 1" or 1.25 tubes "Who is the NavPod?
How to describe the NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs and 722 for 1" or 1.25" tubes?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs and 722 for 1" or 1.0" tubes 25"?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the instrument case the best cbuilt never available for the maritime industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the GPSMAP pre-cut NavPod RailMount f/742xs, 742, 722xs and 722 for 1" or 1.25" Tube? The GPSMAP pre-cut RailMount for 742xs, 742, 722xs and 722 fits 1 inch or 1.25 inch pipe. The NavPod RailMount are most suitable for installing autopilots, navigation instruments or small aircraft. Is it cut or not? Cut How to mount or what is the mounting style of the NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs and 722 for 1" or 1.25" tubes? Rail

Save $155 on the purchase of the NavPod RailMount GPSMAP pre-cut f/742xs, 742, 722xs and 722 for 1" or 1.25 tubes "for only $384 from NVN Marine ! Same day dispatch before 3 p.m. NavPod RailMount GPSMAP pre-cut f/742xs, 742, 722xs and 722 Fits 1" or 1.25" tubes Technical specifications

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Rail
User Guide:	Download PDF

NavPod RailMount GPSMAP pre-cut f/742xs, 742, 722xs and 722 for 1" or 1.25" tubes Shipping and Returns