Pre-cut NavPod RailMount f/Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" tubes Boat Outfitting

Pre-cut RailMount for Simrad NSS9 evo3/B & G Zeus3 9 fits 1" or 1.25" tubes

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or small chartplotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics without replacing the base guard.

Rail mounts are designed for all popular standard size instruments as well as chart plotters. 7 and 9 inches.

Structural rigidity – Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger watertight seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All RailMount NavPods are manufactured with a double seal system providing excellent sealing. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit.The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Nickel CChrome Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10 year warranty on all new NavPods Gen3.

Fits Simrad N RailMount pre-cutSS9 evo3/B and G Zeus3 9, suitable for 1 or 1.25 tubes. RailMount NavPods are best suited for installing autopilots, navigation instruments or small aircraft.
PRODUCT ID: 77800
SKU: NVN-77800
CSKU: CWR-77800
REWRITE: 88911-navpod-railmount-pre-cut-f-simrad-nss9-evo3-b-g -zeus3
MPN: RMX4600-06
UPC: 659988114393
ASIN: B07X3TCM58
WSKU: NAVRMX460006
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 Fits 1" or 1.25"
NAME_EX: NAVPOD RAIL Mount PRE-CUT FOR SIMRAD NSS9 EVO3 ZEUS3 9
PTITLE: Pre-cut NavPod RailMount f/Simrad NSS9 evo3/B&G Zeus3 9 fits 1" or 1.25" tubes
br>TYPE: Boat equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
GPS or Navigation System

Pre-Cut Navpod Rail Mount for SimradNss9 Evo3 Zeus3 9 - RMX4600-06
GPS or navigation system
Gtags:

GSpecs:

Pre-cut NavPod RailMount for Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" tubes Product description

Pre-cut RailMount for Simrad NSS9 evo3/B & G Zeus3 9 for 1" or 1.25" tubes, 25"

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or small chartplotter to an existing protective cradle . Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Rail mounts are designed for all st-sized instrumentsandard as well as for 7 and 9 inch chartplotters.

Structural Rigidity – Gen3 improvements now include thicker acrylic-coated ABS material that improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All RailMount NavPods are manufactured with a double seal system providing excellent sealing. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. The friendsGen3 liorations include a thicker silicone outer seal with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a little style!

Commitment to Quality – We stand by our commitment by offering a guaranteed10 year warranty on all new Gen3 NavPods.

Fits the RailMount precut of Simrad NSS9 evo3/B and G Zeus3 9, suitable for 1 or 1.25 tubes. RailMount NavPods are best suited for installing autopilots, navigation instruments or small aircraft.

Frequently asked questions (FAQ) about the NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 fits 1" or 1.25" Who is the NavPod?
How to describe NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 fits 1" or 1.25" tubes?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" tubes?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. Unique waterproof seal, build quality and attractive design make the best-built instrument case ever availablefor the maritime industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" Tubes? Suitable for RailMount pre-cut of Simrad NSS9 evo3/B and G Zeus3 9, suitable for RailMount 1 or 1.25 tubesNavPods are most suitable for installing autopilots, navigation instruments or small planes. Is it cut or not? CutHow to mount or what is the mounting style of the NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" tubes? Rail

Save $134 when you purchase the Pre-cut NavPod RailMount for Simrad NSS9 evo3/B&G Zeus3 9 for 1" or 1.25" tubing for only $435 from NVN Marine! Same day dispatch before 3 p.m. NavPod RailMount Pre-Cut f/Simrad NSS9 evo3/B&G Zeus3 9 Fits 1" or 1.25" tubes Technical specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Weight:	6.7 lbs
Cut/Uncut:	Coupe
Mount Style:	Rail
User Guide:	Download PDF

Pre-Cut NavPod RailMount for Simrad NSS9 evo3/ B&G Zeus3 9 for 1" or 1.25" tubes User reviewsNavPod RailMount pre-cut for Simrad NSS9 evo3/B&G Zeus3 9 fits 1" or 1.25" tubes Shipping & Returns

Shipping Weight:	6.7 lbs
Box Sizes:	8.00 (h) x 11.00 (w) x 16.00 (w)
Cubic feet:	1408.0
Returnable:	Yes

For detailed shipping terms, please view our shipping policy and you can find our return and refund policy here.