NavPod RMX4407 Pre-Cut RailMount for Simrad NSS7/B&G Zeus T7 Boat Outfitting

RMX4407 RailMount Pre-Cut for Simrad NSS7/B&G Zeus T7

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or 'a small chartplotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

All RailMount NavPods include:

Plastic ABS with acrylic capli>Models are available pre-cut for popular electronic devices.
Chrome-plated stainless steel arm with swivel mount
Two sets of adapters included for 1" or a 1.25" diameter tube

High gloss material

NavPods are Made with a co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity. /li>

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and the back. back of the NavPod to protect your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditions.s difficult. Gen3 improvements include a thicker external silicone gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "compression". set" like many rubber compounds. This is important when you need to open the NavPod in the future to see Repair your electronic devices.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod key for better holding power when mounting. tightening than previous screws For Gen3, we provide tamper-proof nickel-chrome plated stainless steel screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes betweennt at stake. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Rail-mounted navigation pods are best suited for driver installation automatic, navigation instruments or petits chartplotters on existing base guards. Fits any 1" or 1.25"...
PRODUCT ID: 59235
SKU: NVN-59235
CSKU: CWR-59235
REWRITE: 70346-navpod-rmx4407- railmount-pre-cut- f-simrad-nss7-b-g-zeus
MPN: RMX4407
UPC: 659988109849
ASIN: B00YAZLS7K
WSKU: NAVRMX4407
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod RMX4407 Pre-Cut RailMount f/Simrad NSS7/B&G Zeus T7
EX_NAME: NAVPOD RMX4407 Pre-Cut RAIMount FOR SIMRAD NSS7 B&G
PTITLE: NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7

Gtags:

Boat

GSpecs:

NavPod RMX4407 RailMount Precut for Simrad NSS7/B&G Zeus T7 Product Description RMX4407 RailMount Precut for Simrad NSS7/B&G Zeus T7

NavPods RailMount are best used for mounting a control of autopilot, a navigation instrument or a small chartplotter on an existing protective mount. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

All RailMount NavPods include:

Plastic ABS with acrylic cap
Tamper proof fastenersmade of chrome-plated stainless steel
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices.
Chrome stageStainless steel arm with swivel bracket
Two sets of adapters included for 1" or 1.25" diameter tubing

High Gloss Material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your electronique marine. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Mounted navigation podsrail mounted are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about NavPod RMX4407 Pre-Cut RailMount for Simrad NSS7/ B&G Zeus T7 what is NavPod?
How to describe NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience.low cost, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7? Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...Is it cut or uncut? Cut

$127

NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7

$412

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	6.05 lbs
Cut/Uncut:	Cut
Edit Style:	Rail

Shipping Weight:	6.05 lbs
Box sizes:	6.00 (h) x 10.00 (w) x 14.00 (w)
Cubic feet:	840.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return & Return Policy refund here.