Newmar 32-12-35 DC Converter Electrical

32-12-35 DC Converter

Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative mass systems. (See isolated series for positive ground applications.)

Features:

Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long component life
li>
Conformal polyurethane coating on PC boards and corrosion-resistant anodized aluminum cases with rugged shock-mounts ensure survival in hostile environments

De numerous charge conversion and protection circuitse:

Current limitation
Automatic thermal shutdown
Short circuit resistant
Reversal of polarity
Overvoltage protection
Carries CE marking

Specifications:

Input voltage: 20-50
Output voltage: 13.6
Output amps (intermittent): 35
Output amplifiers (continuous): 30
Case size (H x W x D): 6.0 x 4.7 x 16.0 inches (15.2 x 11.9 x 40.6 centimeters)
Weight: 5.5 kg (12 lb)
Output: 13.6 VDC (internally adjustable from 12.6 to 14.5) or 24.5 VDC (or specify )
Ripple: 150 mV P-P maximum
Regulation: 1% line/load
Switching frequency: 40 kHz
Efficiency: 85% – typical.
Isolation: output/chassis; Input/Chassis: 250 VDC

Duty Cycle Ratings*:

Intermittent: 20 minutes of maximum operation, 20 %of service. current limit set at approx. 105% of intermittent rate.
Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
Standing current: less than 100 mA (including power indicator "ON")

Operating temperature specifications:

0-50 degrees C, linear derating from 100% at 40 degrees C to 50% at 50 degrees C.
Thermal shutdown at 70 degrees C Temperature housing
Model 24-12-3: Full outlet -25 degrees to +30 degrees C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C

Mechanical specifications:

Powder -Coated aluminum heatsink enclosure
Front panel terminal block
Heavy duty mounting flange
Compliant coated PC board

Options:

Operation as battery charger or redundant parallel operation* –derating to continuous service (contact factory)
Mounting with extreme vibration kit. (Information below)

Option: Extreme Vibration Mounting Kit

Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the unit. It fits into the Lange unit's mounting bracket to act as a "super shock absorber" for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for 16 to 7 lbs.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

PRODUCT ID: 102305
SKU: NVN-102305
CSKU: CWR-102305
REWRITE: 113416 -newmar-32-12-35-dc-converter
MPN : 32-12-35
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME : NEWMAR DC CONVERTER 32-12-35
NAME_EX:
PTITLE: Newmar DC Converter 32-12-35
TYPE: Electric | DC to DC Converters
SELLER: Newmar Power
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Newmar 32-12-35 DC Converter Product Description

32-12-35 DC Converter

Convert 20-50 VDC input to 12 VDC negative ground output to power communications and navigation equipment on negative ground systems. (See isolated series for positive ground applications.)

Features:

Excellent regulation: output voltage maintained at 1% under all lines and charges. rated conditions
Heat generated by the semiconductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long component life
li>
Conformal polyurethane coating on PC boards and corrosion-resistant anodized aluminum cases with rugged shock-mounts ensure survival in hostile environments

De many cLoad conversion and protection circuits:

Current limiting
Automatic thermal shutdown
Short circuit resistant
li>
Reverse polarity
Overflight protection against damage
Carries CE marking

Specifications:

Input voltage: 20-50
Output voltage: 13.6
Output amps (intermittent): 35
Output amps (continuous): 30
Case size (H x W x D): 6.0 x 4.7 x 16.0 inches (15.2 x 11.9 x 40.6 centimeters)
Weight: 12 lb (5.5 kg)
Output: 13.6 V DC (internally adjustable 12.6 - 14.5) or 24.5 VDC (or specify)
Ripple: 150 mV P-P maximum
Regulation: 1% line/load
Switching frequency: 40 kHz
Efficiency: 85% – Typical.
Isolation: Output/Chassis; Input/Chassis: 250 VDC

Duty Cycle Ratings*:

Intermittent: 20 maximum operating minutes, 20% duty . current limit set at approx. 105% of intermittent rate.
Continuous: 24 hours, 100% service *24-12-3: 2 minutes max. on time
Standing current: less than 100 mA (including power indicator "ON")

Operating temperature specifications:

0-50 degrees C, linear derating from 100% at 40 degrees C to 50% at 50 degrees C.
Thermal shutdown at one case temperature 70 degrees C
Model 24- 12-3: Full output -25 degrees to +30 degrees C; Linear derating from 100% at +30 degrees C to 45% at +50 degrees C

Mechanical specifications:

Powder -Coated aluminum heatsink enclosure
Front panel terminal block
Heavy duty mounting flange
Compliant coated PC board

Options:

Operation as battery chargere or redundant parallel operation* – derating to continuous duty (contact factory)
Mounting with extreme vibration kit. (Information below)

Option: Extreme Vibration Mounting Kit

Extreme Vibration Mounting Kit is available to protect NEWMAR power converters for extreme conditions. shock and vibration stresses when fitted to high vibration vehicles. The kit replaces the standard vibration kit supplied with the device. It fits into the unit's mounting flange to act as a "super shock absorber" for the electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units weighing 2 to 15 lbs. and Kit H for 16 to 7 lbs.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly in chave any problem or concern.

Save $331 when you purchase the Newmar 32-12- 35 DC for only $912 from NVN Marine! Same day dispatch before 3 p.m. Newmar 32-12-35 DC Converter Technical Specifications

Type:	Electric \| DC to DC Converters
Supplier:	Newmar Power
Weight:	10.6 lbs

Newmar DC Converter 32-12-35User ReviewsConverter DC Newmar 12-32-35 Shipping & Returns

Shipping Weight:	10.6 lbs
Box sizes:	(h) x (l) x (l)
Cubic Feet:	0

For detailed shipping terms, please check our shipping policy and you will find our return policyur. and refund policy here.