Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 CI Cylinders Marine Navigation & Instruments

The unique Octopus piston pump delivers more than twice the hydraulic power per watt of input than a standard gear hydraulic pump. Gear pumps leak oil between the gears, unlike a piston (like that used in car engines). This means that the piston pump will place the ram exactly where needed, thereby positioning the rudder precisely. This gives much more precise steering, reducing unnecessary course corrections, meaning the battery consumption of Octopus pumps is up to half that of other pumps. Leading autopilot manufacturers choose Octopus pumps for their non-RFB pilot systems that do not have a steering feedback unit. Previously, system tilt caused by leaking gears meant that a steering feedback unit was required to indicate to the ridere the exact position of the rudder. As Octopus pumps will always return the cylinder to the required position, the steering feedback unit is not required, which also greatly simplifies installation.

Octopus OCTAF1212 Attributes

Compatibility: HydrauliCally Steering Boats
Cylinder Capacity: 10 cubic inches to 20 cubic inches
Voltage Rating: 12 Volts
Mounting Type: Floor Mount
li>

Octopus OCTAF1212 Features and Benefits

Patented piston pump technology with only three moving parts
Delivers more than twice the hydraulic power per watt of input
Adjustable Flow: Configure performance to suit your vessel
Easy Maintenance: Shut-off valves allow removal without draining the steering system
Limited Warranty 2 years

Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18CI cylinders

Now with ORB port connection manifold

Reversing pumps are used when hydraulic steering is installed on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are started by the autopilot and perform a direction correction to the left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversal of direction is achieved by reversing the motor input current.

The pump has only three moving parts and does not require any complicated check valves to prevent the movement of the rudder when powered off. The output flow rate is fully adjustable up to 50% of the rated flow rate, allowing the pump flow rate to be precisely matched to the volume of the installed steering cylinder. The pump is exceptionally reliable and provides more than twice the hydraulic powerthan per watt of input than gear pumps made by competitors.

The motors are heavy-duty, a full 85mm diameter with long brushes and sealed ball bearings for long service life. life. life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.

A useful range of accessories can be used to upgrade the pump by incorporating additional valves and solid-state FET switching. The valves mount directly to the pump body. The FET switch mounts next to the pump. No other autopilot pump manufactured has such benefits.

Benefits of Octopus Reversing Pumps
Piston pump technology providing greater efficiency and precision Fewer moving parts providing increased reliability Variable flow rate for ensure that the pump is matched as precisely as possible to the manuall steering system Professional cut-off valves for simple maintenance.

Features:

Average current 4-6 amps
Maximum current 19 amps
12vDC
Cylinder size: 11-22ci
Flow rate (adjustable): 600cc - 1.2 liters/min

Inverted piston pump, the manufacturing number is Octaf1212, the flow rate is 1.2 liters/min, the voltage is 12 volts and it is suitable for cylindrical hammers from 11 to 22 cubic inches (180 to 360 cc). The flow rate is adjustable. With ORB port.
PRODUCT ID: 75685
SKU: NVN-75685
CSKU: CWR-75685
REWRITE: 86796-octopus-autopilot-pump-type-2-adjustable
MPN: OCTAF1212
UPC: 628309272777
ASIN: B07N8JM6ZB
WSKU: OTPOCTAF1212
SSKU: OCT-OCTAF1212
KSKU: OCTAF1212
GSKU:
MSKU:
LSKU:
NAME: Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 CI Cylinders
NAME_EX: OCTOP AUTOPILOTUS TYPE 2 ADJUSTABLE REVERSING PUMP 12V UP TO
PTITLE: Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 Cylinders CI
TYPE: Marine Navigation & Instruments | Autopilots
SELLER: Octopus Autopilot Drives
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS> POWERWATER STEERING CABLES
Amazon Category : Automotive Parts & Accessories
Octopus & IntelliSteer Dist. Piston Pump, 1.2L/min, 12V, ORB Port
Octopus Type 2 Autopilot Pump, 12V Adjustable Reversing up to OCTAF1212
Automotive Parts & Accessories
Gtags:

G Specs:

Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 Cylinder CI Product Description

The unique Octopus piston pump delivers more than twice the hydraulic power per watt of input than a standard hydraulic gear pump. Gear pumps leak oil between the gears, unlike a piston (like that used in car engines). This means that the piston pump will place the ram exactly where needed, thereby positioning the rudder precisely. This gives much more precise steering, reducing unnecessary course corrections, meaning the battery consumption of Octopus pumps is up to half that of other pumps. Leading autopilot manufacturers choose Octopus pumps for their non-RFB pilot systems that do not have a steering feedback unit. Previously, the tilt of the systemth caused by leaking gears meant that a steering feedback unit was needed to tell the pilot the exact position of the rudder. As Octopus pumps will always return the cylinder to the required position, the steering feedback unit is not required, which also greatly simplifies installation.

Octopus OCTAF1212 Attributes

Compatibility: Hydraulic Steering Boats
Cylinder Capacity: 10 cubic inches to 20 cubic inches
Rated voltage: 12 volts
Mounting type: Floor mount

Octopus OCTAF1212 Features and Benefits

Patented piston pump technology With only three moving parts
Provides more twice the hydraulic power per watt of input
Adjustable flow: configure performance to suit your vessel
Easy maintenance: close shut-off valves allow removal without draining the steering system
2 year limited warranty

Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18CI Cylinder

Now with ORB port connection manifold

Autopilot pumps Reversing are used when hydraulic steering is installed on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are started by the autopilot and perform a direction correction to the left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversal of direction is accomplished by reversing the motor input current.

The pump has only three moving parts and does not require any complicated check valves to Prevent rudder movement when powered off. The flow rateie is fully adjustable up to 50% of rated flow, allowing pump flow to be precisely matched to the volume of the installed steering cylinder. The pump is exceptionally reliable and delivers more than twice the hydraulic power per watt of input than gear pumps made by competitors.

The motors are robust, with a full diameter of 85mm with Long brushes and sealed ball bearings for long life. life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.

A useful range of accessories can be used to upgrade the pump by incorporating valves additional and solid-state FET switching. The valves mount directly to the pump body. The FET switch mounts next to the pump. No other autopilot pump offers such benefits.

Benefits of O Reversing Pumpsctopus
Piston pump technology offering higher efficiency and precision Fewer moving parts for increased reliability Variable flow to ensure the pump is matched as precisely as possible to the manual steering system. Professional shut-off valves for simple maintenance.

Features:

Average current 4-6 amps
Maximum current 19 amps
12 vDC
Cylinder size: 11-22ci
Flow rate (adjustable): 600 cc - 1.2 liters/min

Inverted piston pump, manufacturing number is Octaf1212, flow rate is 1.2 liters/min, voltage is 12 volts, suitable for 11 to 22 cubic inch cylindrical hammers (180 -360cc). The flow rate is adjustable. With ORB port.

Frequently Asked Questions (FAQ) about Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 CI Cylinders Who is the Octopus Autopilot Driven?
How to describe the Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 CI cylinders?
What is the product type?
What is the product mounting type?
What is the compatibility of this product?
br/>Who is the Octopus autopilot? Octopus is a division of Canada Metal (Pacific) Ltd. and has been designing, manufacturing and marketing autopilot drives for over 20 years. CMT manufactures and markets the Octopus range of marine autopilot drive systems. The synergies of the product lines as well as the expertise of their engineering and machining divisions allowed this acquisition to further strengthen our company's capabilities to meet the ever-growing needs of our customers. How to describe the Octopus Type 2 Autopilot Pump - Adjustable InvertersWater Pump - 12V up to 18 Cylinders CI? Inverted piston pump, manufacturing number isOctaf1212, the flow rate is 1.2 liters/min, the voltage is 12 volts and it is suitable for 11 to 22 cubic inch (180 to 360 cc) cylindrical hammers. The flow rate is adjustable. With ORB port.

The ORB port connection manifold is an innovative new way to connect two reversing pumps to a single motor.
This new design provides an efficient way to use engine power. more efficient and, therefore, save fuel.
Designed for boats up to 65 feet long, this pump will give you the power you need without breaking the bank.

Adjustable reversing pump, with ORB port connection manifold.
Available in 12V or 24V models.
Suitable for boats up to to 65 feet overall length (depending on rudder torque).

Octopus Autopilot is the world's first automatic booster for hydraulic pumps. With patented technology and elegant designSleek and compact, it is designed to be the ultimateIdeal solution for hydraulic applications requiring high flow rates and/or low energy consumption.

What is the product type? Pumps/Drives

The ORB Port Connection Manifold is an innovative new way to connect two reversing pumps to a single motor.
This new design provides an efficient way to use more engine power. efficiently and, therefore, save fuel.
Designed for boats up to 65 feet long, this pump will give you the power you need without breaking the bank.
Adjustable reversing pump, with ORB port connection manifold.
Available in 12V or 24V models.
Suitable for boats up to 65 feet overall length (in function of rudder torque).
Robust, durable design to withstand the harshest conditions
Technologypatented piston pump for reliable performance
Twice the power for less energy consumption
The world's most advanced piston pump technology.
Twice the power per input watt.
Half the power consumption.

What is the mounting type of the product? Floor mountingHow compatible is this product? Hydraulically Steered Boats

Save $274 on the purchase of the Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 Cylinder CIfor only $501 from NVN Marine! Same day dispatch before 3 p.m. Octopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 Cylinders CI Technical Specifications

Type:	Navigation and marine instruments \| Autopilots
Supplier:	Octop Autopilot Drivesus
Weight:	8.35 lbs
Type:	Pumps/Drives

Octopus Type 2 Autopilot Pump - AjustaReversing Pump ble - 12V up to 18 Cylinders CI User ReviewsOctopus Type 2 Autopilot Pump - Adjustable Reversing Pump - 12V up to 18 Cylinders CI Shipping & Return

Weight d 'shipping:	8.35 lbs
Box sizes:	5 .00 (h) x 6.00 (w) x 12.00 (w)
Cubic feet:	360.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our returns and refunds policy here.