Permatex 5 Minute Gap Filler Epoxy - 0.6 oz Boat Outfitting
5 Minute Gap Filler Epoxy - 0.6 oz
Versatile, easy to use, general purpose epoxy adhesive is an adhesive system and two-part filler that eliminates the need for welding or brazing. Sets in five minutes, no tightening required. Clear appearance. Fills gaps and does not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent resistance up to 3400 PSI. The Dual Self-Mixing Syringe (84164) mixes adhesive and sealant as it is dispensed, eliminating the need for manual mixing.
Applications:
- Automotive – Suggested Applications: Ideal for complex, multi-part assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber.
Instructions:
- PROTECT: the areawork area must be protected from accidental spills.
- CLEAN: surfaces must be clean, dry and free of grease and oil.
- PREPARE: roughen smooth surfaces (using abrasives or sandpaper)
- OPEN PACKAGE: Remove the tubes and use the back of the cap or a sharp tip to pierce the joints.
- DISTRIBUTION: Squeeze the tubes to distribute the resin and hardener. Mix the resin and hardener thoroughly on a clean, disposable surface for 2-3 minutes until the color is uniform.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble them together. pieces immediately (the product sets in 4 to 6 minutes). ).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is achieved in four hours at 72°F (22°C). Colder temperatures may require a longer setting time.
- CLEANING: Attach nozzle caps and store in molded tray.
NOTE: Adhesive will not stick to most polyethylene or polypropylene plastics . .
Permatex permapoxy 5 minute general epoxy resin is a versatile and easy to use, no-welding, no-welding, two-part general epoxy resin glue and filler system.
PRODUCT ID: 84636
SKU: NVN-84636
CSKU: CWR-84636
REWRITE: 95747-permatex-5-minute-gap-filling-epoxy
MPN: 84201
UPC: 686226842015
ASIN: B000HBNWOI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Epoxy Spacer Filler of 5 minutes Permatex - 0.6 oz
NAME_EX: PERMATEX PERMAPOXY 5 MINUTES GENERAL PURPOSE EPOXY 0.6 OZ
PTITRE: Permatex 5 minutes of gap Epoxy filler - 0.6 oz
TYPE: Landscaping of boats | Cleaning
SELLER: Permatex
VEHICLES & PARTS> PIVEHICLE EQUIPMENT & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT MAINTENANCE> WATERCRAFT CLEANERS
Automotive Parts & Accessories
Permatex 84201 PermaPoxy 5 Minute General Purpose Epoxy, Two 0.6 oz. Tubes
Permatex 84102 High Temperature Epoxy - 500 Degrees
Automotive Parts and Accessories
Gtags:
| Permatex | |
| Epoxy |
GSpecs :
Permatex 5 Minute Gap Filler Epoxy - 0.6 oz Product Description
5 Minute Gap Filler Epoxy - 0.6 oz
L The versatile, easy-to-use, general-purpose epoxy adhesive is a two-part, multi-part adhesive and filler system that eliminates the need for welding or soldering. Sets in five minutes, no tightening required. Clear appearance. Fills gaps and does not shrink. Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent resistance up to 3400 PSI. The Dual Self-Mixing Syringe (84164) mixes adhesive and sealant as it is dispensed, eliminating the need for manual mixing.
Applications:
- Automotive – Suggested Applications: Ideal for complex, multi-part assemblies. Bonds rigid materials including ceramic, chrome, fabric, fiberglass, glass, hard plastic, metalal and rubber.
Instructions:
- PROTECT: The work area must be protected from accidental spills.
- CLEAN: Surfaces must be clean, dry and free of grease and oil.
- PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
- PACKAGE OPEN: Remove the tubes and use the back of the cap or a sharp tip to pierce the joints.
- DISTRIBUTION: Squeeze the tubes to dispense the resin and hardener. Mix the resin and hardener thoroughly on a clean, disposable surface for 2-3 minutes until the color is uniform.
- APPLICATION: Apply a small amount of mixture to both surfaces and assemble them together. pieces immediately (the product sets in 4 to 6 minutes). ).Remove any excess epoxy immediately.
- CURE TIME: Usable strength is reached in four hoursis at 72°F (22°C). Colder temperatures may require longer setting time.
- CLEANING: Attach nozzle caps and store in a molded tray.
NOTE: L The adhesive will not stick to most polyethylene or polypropylene plastics. .
Permatex permapoxy 5 minute general epoxy resin is a versatile and easy to use, no-welding, no-welding, two-part general epoxy resin glue and filler system.
Frequently Asked Questions (FAQ) about Permatex 5 Minute Gap Filler Epoxy - 0.6 oz Who is Permatex?
How to Describe Gap Filler Epoxy spacing in 5 minutes Permatex - 0.6 oz?
Who is Permatex? Permatex is a leading manufacturer, marketer and distributor of premium chemicals for the automotive, home and hardware maintenance and repair markets.llery. Product categories include gasket makers, sealants, hand cleaners, thread lockers, adhesives, cleaners, repair kits and lubricants under well-known brands such as Permatexand Spray Nine. How to describe Permatex Epoxy 5 Minute Gap Filler - 0.6 oz? Permatex permapoxy 5 Minute General Epoxy Resin is a versatile, easy-to-use two-part general epoxy resin glue and filler system with no welding or brazing.
Save $2 when you buy Permatex 5 Minute Gap Filler Epoxy - 0.6 oz for only $4at NVN Marine! Same day dispatch before 3 p.m. Permatex 5 Minute Gap Filler Epoxy- .6oz Technical Specifications
| Type: | Boat Equipment | Cleaning |
|---|---|
| Supplier: | Permatex |
| Weight: | 0.1 lb |
| Shipping Weight: | 0.1 lbs |
|---|---|
| Box Sizes: | 1.00 (h) x 4.00 (w) x 8.00 (w) |
| Cubic feet: | 32.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
For policy Please see our shipping policy and you can find our return and refund policy here.
