Phoenix Victron 12/800 Inverter - 120 V - VE.Direct GFCI Duplex Outlet - 650 W Electrical

Phoenix 12/800 Inverter - 120V - VE.Direct GFCI Duplex Outlet - 650W

Inverters allow users to power home equipment - requiring 230V /120V AC – in "leisure" mode" or "automotive batteries" rated at 12V, 24V or 48V DC.

*This inverter has a duplex GFCI outlet.

E.Direct communications port

The VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable required)
Smartphones, tablets, MacBooks and other Apple and Android devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Activation of alarm from low battery voltage and reset levels
Low battery voltage cutoff and restart levels
Dynamic cutoff: cutoff level depending on load
Output voltage 210 - 245V
Frequency 50Hz or 60Hz
ECO mode activation/deactivation and ECO mode detection level

Monitoring :

Input and output voltage, % of load et al

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

The inverters are short circuit resistant and protected against overheating, whether due to 'overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

In ECO mode, the inverter goes into standby mode when the load drops below a predefined value (min load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default:every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between the plus of the battery and the left contact of the bipolar connector.

LED diagnostics

Please see the manual for a description .

To transfer the load to another AC source: the automatic transfer switch

For Victron's low consumption inverters, they recommend the Filax Switch automatic transfer. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Power at 25 degrees C: (1) 800 VA
Cont. Power at 25 degrees C/40 degrees C: 650/560W
Peak power: 1500W
AC output voltage/frequency (adjustable): 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0.1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
DC Low Shut Down (adjustable): 9.3 / 18.6 / 37.2V
Dynamic (load dependent) DC Low Shut Down (fully configurable): Dynamic shutdown, see https://www. victronenergy .com/live/ve.direct:phoenix-inverters-dynamic-cutoff
Restart and alarm DC low (adjustable): 10.9 / 21.8 / 43.6V
Charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 90 / 90 / 91%
No-load power: 6.5 / 7 / 9.5 W
Default zero-load power in ECO mode (new interval default attempt: 1 / 1.5 / 3.0W
ECO mode stop and start power setting: adjustable
Protection (2): a - f
Operating temperature range - 40 to +65 degrees C (rfan-assisted cooling)

Case specifications:

Material and color: steel chassis and plastic cover (blue Ral 5012)
Battery connection: screw terminals
Maximum cable cross section: 25 / 10 / 10 mm² / AWG4 / 8 / 8
Sockets Standard AC: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); li>
Protection category: IP 21
Weight: 5.5kg / 12lbs
Dimensions (H x W x D, mm): 105 x 230 x 325

Accessories:

Remote on-off: Louvers
Automatic transfer switch: Filax

Standards:

Safety: EN-IEC 60335- 1 / EN-IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000- 6-3
ECE automotive directive R10-4: 1) Non-linear load, crest factor 3:1; 2)Prote keyction: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any return, repair, or support issues related to this product.

PRODUCT ID: 103135
SKU: NVN-103135
CSKU : CWR-103135
REWRITE: 114246-victron-phoenix-inverter-12-800-120v
MPN: PIN121800510
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON PHOENIX INVERTER 12/800 120V VE.DIRECT GFCI
NAME_EX:
PTITLE: Victron Phoenix Inverter 12/800 - 120V - VE.Direct GFCI Duplex Outlet - 650W
TYPE: Electric | Investmenters
SELLER: Victron Energy
HARDWARE> POWER AND ELECTRICAL SUPPLIES> POWER INVERTERS

Gtags:

GSpecs:

Victron Phoenix Inverter 12/800 - 120 V - VE.Direct GFCI duplex outlet - 650 W Product description

Phoenix 12/800 inverter - 120 V - VE.Direct GFCI duplex outlet - 650 W

Inverters allow users to power home equipment – requiring 230V/120V AC – using "leisure" or "automotive" batteries rated at 12V, 24V or 48V DC.

*This inverter has a duplex GFCI outlet.

E.Direct communications port

The VE.Direct port can be connected to:

A computer (VE.Direct to USB interface cable required)
Smartphones, tablets, MacBooks and other Apple and Android devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Activation of alarm from low battery voltage and reset levels
Battery voltage cutoff and restart levelslow
Dynamic cutoff: cutoff level depending on the load
Output voltage 210 - 245 V
Frequency 50 Hz or 60 Hz
Activation/deactivation of ECO mode and detection of ECOlevel mode

Monitoring:

Input voltage and output, % load and alarms

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

The inverters are short circuit resistant and protected. against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

In ECO mode, the inverter goes into standby when the load drops below a predefined value (loadminimum: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between the battery plus and the left hand contact of the bipolar connector.

LED diagnostics

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For Victron low consumption inverters, they recommend the transfer switch Filax automatic. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Power at 25 degrees C: (1) 800 VA
Cont. Power at 25 degrees C/40 degrees C: 650 / 560 W
Peak power: 1500 W
Output AC voltage/frequency (adjustable): 230 VAC or 120VAC + /- 3% 50 Hz or 60 Hz +/- 0.1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62, 0 V
DC Low Shut Down (adjustable): 9.3 / 18.6 / 37.2V
Dynamic (depending on load) DC Low Shut Down (fully configurable ): Dynamic cutoff, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
Restart and low DC alarm (adjustable): 10.9 / 21 .8 / 43.6V
Charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 90 / 90 / 91%
No-load power: 6.5 / 7 / 9.5 W
Default zero-load power in ECO mode (new interval default attempt: 1 / 1.5 / 3.0W
ECO mode stop and start power setting:adjustable
Protection (2): a - f
Operating temperature range - 40 to +65 degrees C (fan assisted cooling)

Case specifications:

Material and color: steel chassis and plastic cover (Ral 5012 blue)
Battery connection : screw terminals
Maximum cable cross section: 25 / 10 / 10 mm² / AWG4 / 8 / 8
Standard AC sockets: 230 V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); li>
Protection category: IP 21
Weight: 5.5kg / 12lbs
Dimensions (H x W x D, mm): 105 x 230 x 325

Accessories:

Remote on-off: Yes
Automatic transfer switch: Filax

Standards:

Safety: EN-IEC 60335 -1 / EN-IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000 -6-3
ECE R10-4 Automotive Directive: 1) Non-linear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any returns, repairs, or support issues related to this product.

Save $43 when you purchase the Victron Phoenix 12/800 Inverter - 120V - VE.Direct GFCI Duplex Outlet - 650W for only $245 from NVN Marine! Same day dispatch before 3 p.m. Victron Phoenix Inverter 12/800 - 120V - Duplex VE.Direct GFCI Socket - 650W Videos Victrsur Phoenix Inverter 12/800 - 120V - Duplex VE.Direct GFCI Socket - 650W Technical Specifications

Type :	Electric \| Inverters
Supplier:	Victron Energy
GFCI:	Yes
User Guide:	Download PDF
Product Manual:	Download PDF
Product brochure:	Download PDF

Victron Phoenix 12/800 inverter - 120 V - Duplex socket VE.Direct GFCI - 650 W User ReviewsVictron Phoenix 12/800 Inverter - 120 V - VE.Direct GFCI Duplex Outlet - 650 W Shipping & Return

For detailed shipping policy, please see our Shipping Policy shipping and you can find our return and refund policy here.