Pre-cut NavPod SystemPod f/Garmin GPSMAP 1223 1223xsv 1243 and 1243xsv on the right and 2 instruments (3.6″ holes) on the left f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv on the right and 2 instruments (3.6" holes) on the left for 9.5" wide protection

GP1170 -25 for Sail: Pre-cut SystemPod for Garmin GPSMAP 1223/1223xsv/1243/1243xsv on the right AND two instruments (3.6″ holes) on the left for 9.5″ wide protection

The SystemPods are intended for mounting a Radar or chart plotter and instruments combined at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for The power supply can be mounted on the dashboard using the SK135. Stanchion kit, or mounted high using the SK129 stanchion kit.

Structural rigidityThe – Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material albas for a larger waterproof seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal seal inPoron Microcell polyurethane is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated StainlessSteel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

PRODUCT ID: 92180
SKU: NVN-92180
CSKU: CWR-92180
REWRITE: 103291-navpod-systempod-pre-cut- f-garmin-gpsmap-1223-1223xsv
MPN: GP1170-25
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: LSKU:
NAME: Pre-Cut NavPod SystemPod f/Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv right and 2 instruments (3.6″ holes) left f /9.5″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 1223/1243XSV and PTITLE: NavPod SystemPod Pre-Cut for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv right and 2 instruments (3.6″ holes ) left f/9.5″ Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:
br>
GSpecs:

Pre-cut NavPod SystemPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv on the right and 2 instruments (3.6 inch holes) on the left for 9.5 inch wide protection Product Description

Pre-cut SystemPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv on the right and 2 instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1170-25 for Sail: Pre-cut SystemPod for Garmin GPSMAP 1223 /1223xsv/1243/1243xsv on the right AND two instruments (3.6″ holes) on the left for 9.5″ wide protection

SystemPods allow mounting of a radar or chart plotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for power can be mounted on the dashboard using the SK135. Post Kit, or mounted high using the SK129 Post Kit.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand navigation conditionsmost difficult wet offshore gation. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like many rubber components.sd. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
Wehonor our commitment by offering a 10 year warranty on all new Gen3s. NavPods.

Frequently asked questions (FAQ) about the Pre-Cut NavPod SystemPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv right and 2 instruments (3 .6″) on the left f/9.5″ Wide Guard Who is the NavPod?
Who is the NavPod? Navpod is a better way to mount your file finder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.

Save $117 when you purchase the NavPod SystemPod pre-cut for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv right and 2 instruments (3, 6 inches) ) sur Left f/9.5″ Wide Guardfor only $412 at NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv on the right and 2 instruments (3.6″ holes) on the left f/9.5″ Wide Guard Technical specifications

Type:	Boat outfitter \| Display Media
Supplier:	NavPod

NavPod SystemPod pre-cut f/Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv on the right and 2 instruments (3.6″ holes) on the left f/9.5″ Wide Guard User reviewsNavPod SystemPre-cut Pod f/Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv right and 2 instruments (3.6″ holes) left f/9.5″ Wide Guard Shipping & Returns

For more shipping policy details, please see our shipping policy shipping and you can find our return and refund policy here.