R&D motor mount with 4" footprint - 5/8" stud - 300 lb capacity per mount Marine Hardware

Engine mount with 4" footprint - 5/8" stud - 300 lb capacity per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes in the base of the bracket are slotted to aid transmission alignment.

How to select (details required):
1.Define the total weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear supports (the transmission side supports of the engine).
3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the transmission side of the engine).
4.Determine the stud diameter needed and media footprint.
5.Choose the most appropriate size media for the weight of each media. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. The required supports aret 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accept propeller and engine thrust in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Pre-loaded to reduce movements
Oblong holes in the base for easy alignment
Mounting types to suit all applications

5/8" stud motor mount with 4" footprint from R&D Marine (800-036). This high-quality R&D Marine product can make your water adventures safe and enjoyable. seriously...
PRODUCT ID: 54878
SKU: NVN-54878
CSKU: CWR-54878
REWRITE: 65989-r-d-engine-mount-w-4-footprint
MPN: 800-036
UPC: 839662003650
ASIN: B00TFU37J2
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D motor mount with 4" footprint - 5/8" stud -300 lb capacity per bracket
NAME_EX: R&D MOTOR BRACKET WITH 4" FOOTPRINT, 5/8" STUD, 300 LBS
PTITLE: R&D MOTOR BRACKET WITH 4" FOOTPRINT - 5/8 STUD 8" - 300 lb capacity per support
TYPE: Marine hardware | Engine mounts
VENDREOU: Marine R&D
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS
Office Product
Amazon Title : R&D motor mount with 4 recess motor mount - 5/8 stud - 300 lb capacity per mount
R&D motor mount with 4" recess - 5/8" stud - 300 lb capacity per mount - 800-036
Office Product
Gtags:

GSpecs:

R&D Motor Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacity per Bracket Product Description Motor Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacity per Bracket /b>

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes in the basebracket are slotted to aid transmission alignment.

How to select (details required):
1.Define the total weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the transmission side of the engine).
br>3.Determine 40% of the total weight then divide by 2 to Determine the capacity of each of the front brackets (the brackets opposite the transmission side of the engine).
4.Determine the necessary stud diameter and bracket footprint.
5. Choose the most appropriate size bracket for the weight per bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by surear port. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts propellers and engine thrust in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Pre - loaded to reduce movement
Oblong holes in base for easy alignment
Mounting types to suit all applications

5/8" stud motor mount with 4" footprint from R&D Marine (800-036). This high-quality R&D Marine product can make your water adventures safe and enjoyable. seriously...

Frequently Asked Questions (FAQ) about R&D Engine Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacity per Mount Who is R&D Marine?
How to describe the word supporteur R&D with 4" footprint - 5/8" stud - 300 lb capacity per bracket?
Who is R&D Marine? It has always been considered essential that all products are easy to use, safe and above all available at the right price. R&D Marine prides itself on being able to supply or assemble stock of most products to cover urgent breakdowns. Thanks to the service provided, the suitability of the products and customer recommendations, it has been possible to develop the global distribution network that R & D Marine has today. How to describe the R&D motor mount with 4" footprint - 5/8" Stud - 300 lb capacity per mount? 5/8" stud motor mount with 4" footprint from R&D Marine (800-036). This high-quality R&D Marine product can make your water adventures safe and enjoyable. seriously...

Save $24 when you purchase the R&D Motor Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacityar supportfor only $96 from NVN Marine! Same day dispatch before 3 p.m. R&D Motor Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacity per Bracket Technical Specifications

Type:	Marine Hardware \| Engine mounts
Supplier:	Marine R&D
Weight:	1.8 lbs
User Guide:	Download PDF
Product Brochure:	Download PDF

R&D Motor Mount with 4" Footprint - 5/8" Stud - 300 lb. Capacity per Bracket User ReviewsR&D Motor Mount with 4" Footprint - 5/8" Stud - Capacity of 300 lbs per carrier Shipping & Returns

Shipping Weight:	1.8 lbs
Box sizes:	4.00 (h) x 6.00 (w) x 6.00 (w)
Cubic feet:	144.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return & Refund Policy here.