Raymarine EV-300 Power Solenoid Evolution autopilot Marine Navigation & Instruments
The EV-300 system is intended for use on board vessels equipped with solenoid-operated electro-hydraulic steering systems. The included ACU300 actuator control unit interacts directly with the boat's steering gear solenoids, providing precise and reliable autopilot steering. The EV-300 Solenoid autopilot also works with Raymarine and third-party constant-running hydraulic drive units. The EV-300 Solenoid Autopilot System includes our p70Rs Color Autopilot Remote with Rotary Controller, EV-1 Sensor Core, EV-300 Actuator Control Unit, and an Evolution Autopilot Wiring Kit .
Raymarine T70160 Attributes- Compatibility: On-board vessels with solenoid controlled electro-hydraulic steering system
- Dimension: 11.2 inches wide x 8.3 inches deep height x 2.5 inches depth
- Rated voltage: 12 volts li>
- Suitable for vessels equipped with solenoid controlled hydraulic steering systems
- Works with constant-running hydraulic steering systemsHydraulic drive systems
- SeaTalk/NMEA2000 for networking with instruments and chartplotters
- Requires no complicated setup or calibration of the autopilot
- 9-axis intelligent heading sensor uses aerospace guidance Technology to adapt and evolve to changing sea conditions and vessel dynamics
- 2 year limited warranty years
- Evolution EV-1 and ACU 87180 Installation Instructions -6-EN.pdf
- Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf
- Evolution EV-1 and ACU 87180-6-EN.pdf installation instructions
- ACU 200 300 400 E70099 E70139 E70100 2D PDF.PDF
EV-300 Power Solenoid Evolution Autopilot
* Requires the addition of a 12V or 24V constant-running variable pump
Features:
- For vessels equipped with a solenoid-controlled hydraulic systemDirection C
- Evolution Ai for superior performance
- No calibration required
- SeaTalkng Network compatible
- ACU-300 auxiliary power supply to SeaTalkng
- NetworkIncludes p70Rs Autopilot Controller
Includes:
- EV-1 sensor core
- p70Rs autopilot control head
- ACU-300 actuator control unit (Includes rotary rudder part number M81105)
- Revolving rudder kitEvolution wiring
- O-ring pack for EV unit (set of 2)
- Wall mounting bracket
The sensor core EV-1
At the center of each Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors the vessel's movement in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor in a single, easy-to-install package.
Mount the EV sensor core above or below the decks, the rugged housing is fully sealed and built to IPX6 and IPX7 waterproof and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkngnetworking allows a single cable connection for power and data to the Evolution ACU (actuator control unit) and SeaTalk ng and NMEA2000 networks.
Features:
- Precise monitoring of heading, pitch, roll and yaw enabling autopilot to evolve instantly as sea conditions and vessel dynamics change
- Flexible installation options
- Above or below deck mounting
- Simple SeaTalkng connectivity to control head and ACU
- Solid-state sensor technology provides dynamic accuracy 2 degrees in all conditions
- Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
Head p70Rs Autopilot Control
The p70R features a convenient rotary control knob and supports multiple autopilot modes, including Auto, Sleep, Trolling Patterns, and Mode from suivi from your GPS or chartplotter.
Features:
- LightHouse's user interface is quick and easy to use
- 160° wide viewing angles
- Getting started wizard helps you set up the driver quickly and easily
- Anti-reflective coating for better visibility in direct sunlight
- Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
- Supported autopilot modes: Auto; To wait for; Model; Track; Weathervane; Power Steer and Jog Steer
- Simple system and group dimming/lighting
- Support for multiple data sources
- SeaTalkng NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-300 Autopilot Control Unit (ACU)
The robust ACU (Actuator Control Unit) provides reliable automatic control and powersalso the SeaTalkngbus. Choose the ACU that matches your steering system type.
Evolution Wiring Kit
- 1 x SeaTalkng Power cable (0.4 m)
- 1 x SeaTalkng Backbone cable (5 m )
- 1 x SeaTalkng Spur Cable (0.4 m)
- 1 x SeaTalk ng 5 way Connection block
- 2 x SeaTalkng T-connector
- 2 x SeaTalkng sup>Terminator
p70R is a button controller and rotary control dial, mainly designed for power boats. LThe LED backlight provides excellent visibility day and night and has ultra-low power consumption. The P70R also supports group dimming with i70 instruments and e7 multifunction displays. Ev-1 is specially designed for Evolution mechanical and hydraulic autopilot systems. The Sea Talkng network allows cable connection. The heart of the EV sensor is a 9-axis sensor capable of monitoring the vessel's movement in all three dimensions. The innovative EV Sensor Core combines advanced solid-state sensors with the Evolution autopilot processor in an easy-to-install package. Install the EV sensor core above or below the deck. The robust shell is completely sealed and meets Ipx6 and Ipx7 waterproof and immersion standards. The robust ACU (Actuator Control Unit) provides reliable motive power for autonomous driving and also powers the Sea Talkng bus.
PRODUCT ID: 48979
SKU: NVN-48979
CSKU: CWR -48979
REWRITE: 60090-raymarine-ev-300-power-solenoid-evolution-autopilot
MPN: T70160
UPC: 723193774342
ASIN: B00DN9JC04
WSKU: RAYT70160
SSKU:
KSKU: RAYT70160
GSKU:
MSKU:
LSKU: 152-T70160
NAME: RAYMARINE EV-300 SOLENOID PILOT
NAME_EX:
PTITLE: Raymarine EV-300 Power Solenoid Evolution Autopilot
TYPE: Marine Navigation & Instruments | Autopilots
SELLER: Raymarine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERCRAFT PARTS & ACCESSORIES> POWERWATER STEERING PARTS> POWERWATER STEERING CABLES
Gtags:
GSpecs:
Raymarine EV-300 Power Solenoid Evolution Autopilot Product Description
The EV-300 system is intended for use on board vessels equipped with solenoid-controlled electro-hydraulic steering systems. The included ACU300 actuator control unit interacts directly with the boat's steering gear solenoids, providing precise and reliable autopilot steering. The EV-300 Solenoid autopilot also works with Raymarine and third-party constant-running hydraulic drive units. The EV-300 Solenoid Autopilot System includes our p70Rs Color Autopilot Remote with Rotary Controller, EV-1 Sensor Core, EV-300 Actuator Control Unit, and an Evolution Autopilot Wiring Kit .
Attributes of the Raymarine T70160- Compatibility: On-board vessels with controlled electro-hydraulic steering systemsolenoid operated
- Dimension: 11.2 inches wide X 8.3 inches high X 2.5 inches deep
- Rated voltage: 12 volts
- Suitable for vessels equipped of solenoid-controlled hydraulic steering systems
- Works with constant-running hydraulic drive systems
- SeaTalk/NMEA2000 For networking with instruments and chartplotters
- Requires no complicated setup or autopilot calibration
- 9-axis intelligent heading sensor that uses aerospace guidance technology to adapt and evolve to changing sea conditions and to Vessel Dynamics
- 2 Year Limited Warranty
- Evolution EV-1 and ACU 87180 Installation Instructions- 6-EN.pdf
- Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf
- Evolution EV- 1 and ACU Installation instructions 87180-6-EN.pdf
- ACU 200 300 400 E70099 E70139 E70100 2D PDF.PDF
EV-300 Autopilot Power Solenoid Evolution
* Requires addition of 12V or 24V constant-running variable pump
Features:
- For vessels equipped with solenoid-controlled hydraulic steering
- Evolution Ai for superior performance
- No calibration required
- SeaTalkng Network compatible
- ACU-300 auxiliary power to SeaTalk network ng
- Includes p70Rs autopilot controller
Includes:
- EV-1 sensor core
- Com headp70Rs autopilot control
- ACU- 300 Actuator Control Unit (includes rotary rudder part number M81105)
- Evolution Wiring Kit
- Pack O-rings for EV unit (set of 2)
- Wall mounting bracket
The core of the EV-1 sensor
At the center of every Evolution system is the core of the intelligent EV sensor, a 9-axis sensor. which monitors the movement of the ship in three dimensions. The innovative EV Sensor Core combines an advanced solid-state sensor with the Evolution autopilot processor in a single, easy-to-install package.
Mount the EV Sensor Core above or below the decks, the rugged housing is fully sealed and built to IPX6 and IPX7 waterproof and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng allows a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features:
- Precise monitoring of heading, pitch, roll and yaw enabling autopilot to evolve instantly as sea conditions and vessel dynamics change
- Flexible installation options
- Above or below deck mounting
- Simple SeaTalkng connectivity to control head and ACU
- Solid-state sensor technology provides dynamic accuracy up to 2 degrees in all conditions
- Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
p70Rs autopilot control head
The p70R has an convenient rotary control knob and supports multiple autopilot modes including Auto, Sleep, Trolling Patterns, and Follow mode from your GPS or chartplotter.
Features :
- LightHouse's user interface is quick and easy to use
- 160° wide viewing angles
- The Startup Assistant helps you configure the driver quickly and easily
- Anti-glare coating for better visibility in direct sunlight
- Low power consumption - typically 132mA/1.6W - 27% of less than ST70 at x4 measured brightness
- Supported autopilot modes: Auto; To wait for; Model; Track; Weathervane; Power Steer and Jog Steer
- Simple system and group dimming/lighting
- Support for multiple data sources
- SeaTalkng /NMEA2000 and SeaTalk1y connectivity (no bridge required)
ACU-300 Autopilot Control Unit (ACU)
The robust ACU (Actuator Control Unit) provides power to drive the autopilot and also powers the SeaTalkngbus. Choose the ACU that matches your steering system type.
Evolution Wiring Kit
- 1 x SeaTalkng Power cable (0.4 m)
- 1 x SeaTalkng Backbone cable (5 m )
- 1 x SeaTalkng Spur Cable (0.4 m)
- 1 x SeaTalk ng 5 way Connection block
- 2 x SeaTalkng T-connector
- 2 x SeaTalkng sup>Terminator
p70R is a button control and rotary control dial, mainly designed for power boats. The LED backlight provides excellent visibility day and night and has ultra-low power consumption. The P70R also supports group dimming with i70 instruments and e7 multifunction displays. Ev-1 is specially designed for Evolution mechanical and hydraulic autopilot systems. The Sea Talkng network allows cable connection. The heart of the EV sensor is a 9-axis sensor capable of monitoring the vessel's movement in all three dimensions. The innovative EV Sensor Core combines advanced solid-state sensors with the Evolution autopilot processor in an easy-to-install package. Install the EV sensor core above or below the deck. The sturdy shell is completely sealed and meetsto Ipx6 and Ipx7 waterproof and immersion standards. The robust ACU (Actuator Control Unit) provides reliable motive power for autonomous driving and also powers the Sea Talkng bus.
Raymarine EV-300 Power Solenoid Evolutis on related products autopilotRaymarine SmartController
SeaTalk Raymarine S100 Wireless Autopilot Remote Control
Frequently Asked Questions (FAQ) about the RAYMARINE EV-300 SOLENOID PILOT Who is the Raymarine?
/> What is the compatibility of this product?
Who is Raymarine? Raymarine, world leader in marine electronics, develops and manufactures the most complete range of electronic equipment. Raymarine is dedicated to the design, manufacture and distribution of the highest quality marine electronic products and services to the recreational and light commercial markets worldwide. Whether stand-alone units or e-systemsFully integrated, Raymarine understands boating and what it takes to make it safer. How compatible is this product? Onboard vessels with solenoid-controlled electro-hydraulic steering system
- The EV-300 is a solenoid-controlled autopilot for boats with hydraulic steering.
- It is featuring Evolution Ai for superior performance, requires no calibration and is fully compatible with SeaTalkng.
- The EV-300 Power Solenoid Evolution autopilot is a reliable and robust autopilot that offers a number advanced features.
- It is designed for vessels equipped with solenoid-controlled hydraulic steering and is compatible with Evolution Ai.
- The autopilot requires the addition of a variable pump to operate constant 12V or 24V to operate.
- li>
- Powerful autopilot systemand intelligent with integrated hydraulic pump.
- The superior performance of Evolution Ai and no calibration required, making it the ideal choice for any vessel.
- SeaTalkng compatibility allows for seamless integration easy with your navigation system.
Buy at the best price Raymarine EV-300 Power Solenoid Evolution autopilot for only 3,499 $from NVN Marine! Free same day delivery before 3 p.m. Raymarine EV-300 Power Solenoid Evolution Autopilot Videos Raymarine EV-300 Power Solenoid Evolution Autopilot Technical Specifications
Type: | Navigation and Instruments sailors | Autopilots |
---|---|
Supplier: | Raymarine |
Weight: | 13.1 lbs |
Steering Type: | Cable /solenoid |
Product brochure: | Downloadthe PDF |
Product Installation: | Download the PDF |
Shipping Weight: | 13.1 lbs |
---|---|
Box Sizes: | 8.00 (h) x 17.00 (l) x 20.00 (l) |
Cubic Feet: | 2720.0 |
Returnable: | Yes |
To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
- Raymarine EV-200 Sail Linear Drive Evolution autopilot
- Raymarine EV-200 Sail Evolution autopilot
- Raymarine EV-200 Power Hydraulic Evolution autopilot
- Raymarine EV-200 Power Evolution autopilot
- Raymarine EV-2 sensor core
- Raymarine EV-150 Evolution Core Pack - Without drive
- Raymarine EV-100 Wheel Pilot with p70s Corepack Controller Only - No Drive Unit