Ronstan Series 60 Core Block - Single - Becket Sailing

Series 60 Core Block - Single - Becket

Core Blocks are a true multi-purpose solution. An optimized 2-stage bearing system provides excellent performance across the entire working load range with an integrated thrust bearing function and the resilience to support high dynamic or static loads. An acetal pulley, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these blocks are the right choice for sheeting, halyard and control line applications for cruising and racing.

Universal bearing
Dynamic static load and high performance

The Ronstan universal bearing incorporates our proven 2-stage bearing system

Stage 1 - Under moderate loads , acetal ball bearings ensure minimum friction.

br>Step 2 - Under heavy loads, where deformation of the ball bearings alone would result in increased friction, an acetal sliding bearing on a polished stainless steel ring takes over, maintaining low friction performance.

In addition, bearings Ball bearings are configured to act as a stop between the pulley and the cheeks, preventing the pulley from rubbing on the cheeks and causing friction when the thread in and out of the block is not perfect. Particularly important for cheek blocks.

Alloy Cheek Plates
Block cheeks are made from the highest quality alloy for maximum strength . Material optimization and cut-out design minimize weight and allow easy fresh water rinsing of salt and debris from bearings. The cheek design has been improved with a flare at the block throat and a reduced gap between the cheek and pulley, minimizing wear and tear.cable security.

Universal head
The head assembly incorporates a brass washer bearing to ensure smooth 360 rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0 or 90.

Shackles are made of high quality forged 316 grade stainless steel.

Features:

ClassesLeading performance and sleek, contemporary styling
Excellent high dynamic and static load performance
Less than half from the friction of the closest competitor
Universal head with full 3-axis articulation
Head posts can be locked at 0 or 90 degrees at using a 2.5mm hex/Allen wrench
The central hub hole can be used as a take-off or lashing point for the becket

Applications:

Ideal for mainsail, halyard and mainsheet applicationse spinnaker on boats up to 12m (40')
Various control line applications on larger yachts

Materials:

Sheave: U.V. Stabilized acetal
Cheek body: aluminum alloy
Ball Bearings: High Compression Strength Carbon Black Acetal
Shackle, Head Post & Hub: Grade 316 Stainless Steel
Spindle: Steel stainless steel 2205

Specifications:
Pulley Ø:60 mm(2-3/8")
Max. Ø of rope:12 mm(1/2")
Ø of pin:6 mm(1/4")
M.W.L.:1,000 kg(2,200 lbs)
B.:2,000 kg(4,410 lbs)
Weight:275g. (9.7oz)

The Ronstan center module is a true all-rounder. The two-stage tuned bearing system features a built-in thrust bearing feature and flexibility to cope with. high dynamic or static loads, andcan provide excellent performance across the full range of workloads. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package for reliability and long life. Lifespan considerations, these building blocks are the right choice for cruise and racing sheet, sling, and control line applications. 66372-ronstan-series-60-core-block-153-single
MPN: RF64110
UPC: 9316800446063
ASIN: B005MZA3QO
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan Series 60 Core Block - Single - Becket
EX_NAME: RONSTAN SERIES 60 CORE BLOCK SIMPLE BECKET
PTITLE: Ronstan Series 60 Core Block - Single - Becket
TYPE: Sailing | Blocks
SELLER: Ronstan
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> SAILBOAT PARTS Ronstan Series 60 Core Block - Single - Becket - RF64110

Gtags:

Ronstan

GSpecs:

Ronstan Series 60 Core Block - Single - Becket Product Description Series 60 Core Block - Single - Becket

Core Blocks are a true complete solution. An optimized 2-stage bearing system provides excellent performance across the entire working load range with an integrated thrust bearing function and the resilience to support high dynamic or static loads. An acetal pulley, alloy cheeks and stainless steel fixings complete the durable package. For their reliability and long life, these blocks are the right choice for sheeting, halyard and control line applications for cruising and racing.

Universal bearing
Dynamic static load and high performance

The Ronstan universal bearing incorporates our proven 2-stage bearing system

Stage 1 - Under moderate loads , acetal ball bearings ensure smooth frictionminimum friction.

br>Stage 2 - Under heavy loads, where deformation of the ball bearings alone would result in increased friction, an acetal sliding bearing on a polished stainless steel ring takes over, maintaining low friction performance.

In addition, the ball bearings are configured to act as a stop between the pulley and the cheeks, preventing the pulley from rubbing on the cheeks and causing friction when the sheave is used. The entry and exit of the block line is not perfect. Particularly important for cheek blocks.

Alloy Cheek Plates
Block cheeks are made from the highest quality alloy for maximum strength . Material optimization and cut-out design minimize weight and allow easy fresh water rinsing of salt and debris from bearings. The cheek design has been improved with a flare at the levelu of the block groove and a reduced gap between the cheek and the pulley, thus minimizing cable wear.

Universal head
The head assembly incorporates a Brass bearing washer to ensure smooth 360 rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0 or 90.

Shackles are high quality 316 grade forged stainless steel.

Features:

Leading performance and sleek, contemporary styling
Excellent dynamics and high static load performance
Less than half the friction from nearest competitor
Universal head with full 3-axis articulation
Head posts can be locked at 0 or 90 degrees using 'a 2.5mm hex/allen wrench
The center hub hole can be used as a take-off point or attachment point for rings
/li>

Applications :

Ideal for mainsail, halyard and spinnaker sheet applications on boats up to 12M (40')
Various control line applications on larger yachts

Materials:

Sheave: U.V. Acetal stabilized
Cheek body: aluminum alloy
Ball bearings: carbon black acetal with high compressive strength
Shackle, head post & hub: 316 grade stainless steel
Pin: 2205 stainless steel

Specifics:
Pulley Ø:60 mm(2-3/8")
Max. rope Ø:12 mm(1 /2")
Spindle Ø:6 mm(1/4")
M.W.L.:1,000 kg(2,200lbs)
B.L.: 2,000 kg (4,410 lb)
Weight: 275 g (9.7 oz)

The Ronstan central module is a real solution Versatile The two-stage rolling system has a two-stage rolling function.integrated thrust and flexibility to cope with high dynamic or static loads, and can provide excellent performance over the entire working load range. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package for increased reliability and durability. Considering the service life, these building blocks are the right choice for cruise and racing sheet, sling and control line applications

Frequently Asked Questions (FAQ) about the Ronstan 60 series central block - Simple - Becket Who is. the Ronstan?
How to describe the Ronstan Series 60 Core Block - Single - Becket?
Who is the Ronstan Le s?The sailboat hardware market and the architectural rigging market are different worlds, but in Australia, they are both dominated by a powerful actor. Bout design, manufacturing and distribution operationst at the end of Ronstan have become the only serious competitor. Internationally, Ronstan is one of the three largest sailboat hardware brands in the world, instantly recognized and respected in 45 countries. How to describe the Ronstan Series 60 Core Block - Single - Becket? The Ronstan basic module is a truly complete solution. The tuned two-stage bearing system has a built-in thrust function and flexibility to cope with high dynamic or static loads, and can provide excellent performance over the entire working load range. The choice of acetal and aluminum pulleys, alloy cheeks and stainless steel fixings complete the durable package. For reliability and long life, these basic elements are the right choice for cruising and racing plates, slings and control line applications.

Save $23 when youou purchase the Ronstan Series 60 Core Block - Single - Becket for only $130 at NVN Marin! Same day dispatch before 3 p.m. Ronstan Series 60 Core Block - Single - Becket Technical Specifications

Type:	Sail \| Blocks
Seller:	Ronstan
Weight:	0.8 lbs

Ronstan Series 60 Core Block - Single - Becket User ReviewsRonstan Series 60 Core Block - Single - Becket Shipping & Returns

Shipping Weight:	0.8 lbs
Box sizes:	2.00 (h) x 4.00 (w) x 7.00 (w)
Cubic feet:	56.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see ourre shipping policy and you can find our return and refund policy here.