Seaview SPOD Sail Pod Box Uncut Medium for MFD Display Boat Outfitting

Seaview SP3S Medium MFD Sailboat PodThe SPOD is a pod for sailboats and catamarans. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is a precise viewing angle defined during installation for the customer. The module fits the majority of steering racks from Jefa, Whitlock and Edson and can be customized for other systems. Stainless steel clamps attach to 1", 1.125" and 1.25" rails. Security screws are used to hold the SPOD together. A waterproof gasket is used to keep water out inside the pod, while a GORE-TEX ventilation vent allows hot air to escape without letting water in. Maximum usable face (13.75" × 9") Maximum cutout area (12.938). " × 8,125") Can use up to 2 optional accessory modules (part # SP1BOX)

Seaview SP3S Attributes
Sea View SPOD Sail Pod Box

Medium uncut pod with 2 stainless steel clips

Overall dimensions:

Width: 14.25"
Height: 9.5"
Depth: 5.147"

Maximum usable face:

Width: 13.75"
Height: 9"

Maximum cutting area:

Width: 12.938"
Height: 8.125"

Fits models

B&G: Z8
Furuno: 1623, 1715, 1724C, 1734C, GP1720C, MFD8
Garmin: 6008, 6208, 8008, 8208
Lowrance: HDS-8, HDS-8M (same for Gen2)
Lowrance: HDS-10, HDS-10M (same for Gen2)
Raymarine: C70, C80, E80, C90W, E90W
Simrad: NSS8, NSE8
Sitex: EC5, EC7, SNS 700
Standard horizon: CPN1010i

The SPOD is a module for sailboats and catamarans based on the Seaviews modular assembly concept. , Seaview developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is an accurate viewing angle during installation for the customer. The bracket fits the majority of steering racks from Jefa, Whitlock and Edson, and can be customized for other systems.

Stainless Steel Clamps

The stainless steel clamps will attach to 1", 1.125" and 1.25" rails.

Security screws are used to hold the SPOD together. A watertight seal is used to prevent water from entering the inside of the pod, tand a GORE-TEX ventilation vent allows hot air to escape without letting water in.

Optional accessory stroller

One of the unique capabilities of this SPOD is the ability to add optional side pods (SP1BOX). Currently, no other sailboat pod on the market has this feature. Depending on the size of the pod box you choose, you can mount one to four of these accessory pods. This offers the customer many flexible solutions to optimize their configuration.

The usable area of this Seaview Sail module is (13.75 x 9) and the maximum cutout area is (12.938 x 8.125) 11.75 x7. Comes with two highly polished stainless steel clips. ...on the back
PRODUCT ID: 50725
SKU: NVN-50725
CSKU: CWR-50725
REWRITE: 61836-seaview-spod-sail-pod-box-uncut-medium
MPN: SP3S
UPC: 839662008846
ASIN: B00E9M386I
WSKU:
SSKU:
KSKU: SVWSP3S
GSKU:
MSKU:
LSKU:
NAME: Seaview SPOD Sail Pod Box, Uncut Mount for MFD Display
EX_NAME: SEAVIEW SPOD SAIL POD BOX SP3S UNCUT MED MFD 2 SS CLAMPS
PTITLE: Seaview SPOD Sail Pod Box, uncut support for MFD screen
TYPE: Boat fittings | Display Mounts
SELLER: Seaview
ELECTRONICS> MARINE ELECTRONICS
Sports
Seaview SP3S Sail Pod for Multifunction Displays and Chartplotters, White, SP3S
SPOD Sailing with Sea ViewPod Box Uncut Medium for MFD Display
Sports
Gtags:

GSpecs:

Seaview SPOD Sail Pod Box Uncut Medium for MFD Display Product Description

Seaview SP3S Medium MFD Sailboat PodThe SPOD is a pod for sailboats and catamarans. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is a precise viewing angle defined during installation for the customer. The module fits the majority of steering racks from Jefa, Whitlock and Edson and can be customized for other systems. Stainless steel clamps attach to 1", 1.125" and 1.25" rails. Security screws are used to hold the SPOD together. A waterproof gasket is used to keep water out inside the pod, while a GORE-TEX ventilation vent lets hot air escape without letting water in.Maximum usable size (13.75" × 9")Maximum cutting area (12.938" × 8.125")Can use up to 2 optional accessory pods (part #SP1BOX)

Seaview SP3S Attributes
SPOD Seaview Sailing Pod Box

Uncut Medium Pod with 2 Stainless Steel Clamps

Overall dimensions:

Width: 14.25"
Height: 9.5"
Depth: 5.147"

Maximum usable face:

Width: 13.75"
Height: 9"

Maximum cutting area:

Width: 12.938"
Height: 8.125"

Fits Models

B&G: Z8
Furuno: 1623, 1715, 1724C, 1734C, GP1720C, MFD8
Garmin: 6008, 6208, 8008, 8208
Lowrance: HDS- 8 , HDS-8M (same for Gen2)
Lowrance: HDS-10, HDS-10M (same for Gen2)
Raymarine: C70, C80, E80 , C90W, E90W
Simrad: NSS8, NSE8
Sitex: EC5, EC7, SNS 700
Horizon standard: CPN1010i

The SPOD is a pod for sailboats and catamarans Developing the Seaviews modular mounting concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is an accurate viewing angle during installation for the customer. The bracket fits the majority of steering racks from Jefa, Whitlock and Edson, and can be customized for other systems.

Stainless Steel Clamps

The stainless steel clamps will attach to 1", 1.125" and 1.25" rails.

Security screws are used to hold the SPOD together. AA waterproof seal is used to prevent water from entering the interior of the pod, while a GORE-TEX ventilation vent allows hot air to escape without letting water in.

Optional accessory stroller

One of the unique capabilities of this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this functionality. Depending on the size of the pod box you choose, you can mount one to four of these accessory pods. This offers the customer many flexible solutions to optimize their configuration.

The usable area of this Seaview Sail module is (13.75 x 9) and the maximum cutout area is (12.938 x 8.125) 11.75 x7. Comes with two highly polished stainless steel clips. ...at the back

Frequently Asked Questions (FAQ) about Seaview SPOD Sail Pod Box Uncut Medium for MFD Display Who is Seaview?
How to describe Seaview SPOD Sail Pod Box Uncut Medium for MFD Display?
Is it cut or uncut?
How to mount or what is the mounting style of Seaview SPOD Sail Pod Box Uncut Medium for MFD Display?
What is the size of the usable surface area of the product?
Who is Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail, recreational and commercial boats.cielle. Seaview has added a hard anodizing process before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe Seaview SPOD Sail Pod Box Uncut Medium for MFD Display? The usable surface area of this Seaview sail module is (13.75 x 9) and the maximum cutting areaThe is (12.938 x 8.125) 11.75 x7. Comes with two highly polished stainless steel clips. ...on the backIs it cut or not? Uncut

$80

Seaview SPOD Sail Pod Box Uncut Medium for MFD Display

$320

Type:	Boat Equipment \| Display Stands
Seller:	Seaview
Weight:	7.4 lbs
Cut/Uncut:	Uncut
Mounting Style:	Base
Usable side:	13,75"L x 9"H
Product Brochure:	Download PDF

Weight shipping:	7.4 lbs
Box sizes:	7. 00 (h) x 10.00 (w) x 16.00 (w)
Cubic feet:	1 120.0
Returnable:	Yes

For detailed shipping conditions, please see our Shipping Policy and you can find our Returns and Refunds Policy here.