Simrad NAC-D autopilot computer for steering by wire Marine Navigation & Instruments

NAC™-D is a digital steering autopilot solution for ship electronic control systems (steering systems with digital interface). It allows automatic switching between two speed profiles, providing optimal steering performance at low and high speeds. It comes with Continuum(R) steering and the new SteadySteer™ feature. Only requires connecting two Micro-C connectors – no additional hydraulic pumps, installation of a rudder sensor or dockside rudder calibration is required. Featuring Continuum(R) steering and support for the new SteadySteer™, the NAC-D enables automatic switching between two speed profiles providing optimal steering performance at low and high speeds. Simrad(R) autopilot systems incorporate state-of-the-art electronics and represent over 70 years of experience and development. The pilotsSimrad(R) automatics can reduce your workload and fatigue and improve your situational awareness and safety, helping you arrive fresher at your destination.

Simrad 0015621001 Attributes

Compatibility: SeaStar Solutions/ Volvo/ Yanmar and Yamaha Approved Control System Interface
Adapter Type: Micro-C Connector
Color: Black

Simrad 0015621001 Features and Benefits

SeaStar Solutions , Volvo , Yanmar and Yamaha Approved control system interface
Control via AP ™ 44, AP 48
No need for an additional hydraulic pump, rudder sensor or dockside calibration
Steer towards a defined waypoint, heading or turn pattern, such as a U-turn, a spiral turn and many others. Learn more – The NAC™-D can even initiate a zigzag turn
CAN-Bus Data Connectivity – Connecting to SystemsOptimus steering systems via CAN-Bus data network
No supplier warranty

Simrad Warranties 0015621001

Simrad-Professional-Global-Warranty-Policy -2016-v2.pdf

NAC- D Autopilot computer for fly-by-wire

NAC-D is a electric steering autopilot, therefore solution for electronic control systems of ships (steering systems with digital interface).

With NAC -D, boaters equipped with SeaStar Optimus, Yanmar VC10/JC10 , Volvo IPS/EVC or Yamaha helm master /Single-engine control systems can benefit from all the features and performance of Simrad autopilots.

Easy to install

Only requires the connection of two Micro-C Connectors – no additional hydraulic pumps, installation of a rudder sensor or dockside rudder calibration are required. This allowshelps boaters save time and money.

Automatic switching

Featuring Continuum steering and SteadySteer support ™, the NAC -D allows automatic switching between two speed profiles providing optimal steering performance at low and high speeds.

Flexible choice

Choose the controller that matches your preferences from dedicated controllers like the AP™ 44 or AP 48.

Simrad autopilot systems incorporate state-of-the-art electronics and represent over 70 years of experience and development. Simrad autopilots can reduce your workload and fatigue and improve your situational awareness and safety, helping you arrive at your destination fresher.

Features

Control system interface approved by SeaStar Solutions, Volvo, Yanmar and Yamaha
Control via AP™ 44, AP 48
No need for additional hydraulic pump, rudder sensor or dockside calibration
SteadySteer™ function included
Steer towards a defined waypoint, heading or turn pattern, such as a U-turn, spiral turn and many others – the NAC™ - D can even initiate a zigzag turn
CAN-bus data connectivity - connection to Optimus steering systems via CAN-bus data network

NAC-D Autopilot computer for wired control NAC-D is a wired control autopilot solution for ship electronic control system (steering system with digital interface). .
PRODUCT ID: 89039
SKU: NVN-89039
CSKU: CWR-89039
REWRITE: 100150-simrad-nac-d-autopilot-computer-f-steer-by-wire
MPN: 000-15621-001
UPC: 9420064115747
br>ASIN:
WSKU: SIM00015621001
SSKU: SIM-000-15621-001
KSKU: SIM0015621001
GSKU:
MSKU:
LSKU:
NAME: Simrad NAC -D Autopilot computer for steering by wire
NAME_EX: SIMRAD NAC-D AUTOPILOT COMPUTER FOR STEERING BY WIRE
PTITLE: Simrad NAC-D Autopilot Computer for Steering by Wire
TYPE: Navigation and Marine Instruments | Autopilots
SELLER: Simrad
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT STEERING PARTS> WATERCRAFT STEERING CABLES

Gtags:

GSpecs:

Simrad NAC-D Steering-by-Wire Autopilot Computer Product Description

NAC™-D is a digital steering autopilot solution for ship electronic control systems (steering systems with digital interface). It allows automatic switching between two speed profiles, providing optimal steering performance at low and high speeds. It comes with Continuum(R) steering and the new SteadySteer™ feature. Only requires connecting two Micro-C connectors – no additional hydraulic pumps, installation of a rudder sensor or dockside rudder calibration is required. Featuring Continuum(R) steering and support for the new SteadySteer™, the NAC-D enables automatic switching between two speed profiles providing optimal steering performance at low and high speeds. Simrad(R) autopilot systems incorporate an electronictechnology and represent over 70 years of experience and development. Simrad(R) autopilots can reduce your workload and fatigue and improve your awareness and safety, helping you arrive fresher at your destination.

Simrad 0015621001 Attributes

Compatibility: SeaStar Solutions/ Volvo/ Yanmar And Yamaha Approved Control System Interface
Adapter Type : Micro-C connector
Color: Black

Simrad 0015621001 Features and Benefits

SeaStar Solutions , Volvo , Yanmar and Yamaha approved control system interface
Control via AP™ 44, AP 48
No need additional hydraulic pump, rudder sensor or dock calibration
Head to a defined waypoint, heading or turn pattern, such asn U-turn, a spiral turn and many more – the NAC™-D can even initiate a zigzag turn.
CAN-Bus Data Connectivity – Connecting to Optimus Steering Systems via CAN-Bus data network
No supplier warranty

Simrad 0015621001 Warranties

Simrad-Professional-Global-Warranty-Policy-2016-v2.pdf

NAC-D autopilot computer for fly-by-wire

NAC-D is an autopilot solution for electric steering for electronic ship control systems (steering systems with digital interface).

With NAC -D, boaters equipped with SeaStar Optimus, Yanmar VC10/JC10, Volvo IPS/ EVC or Yamaha, helm master/single engine control systems can benefit from all the features and performance of Simrad autopilots.

Easy to install

Only requires connection toe two Micro-C connectors: no additional hydraulic pumps, installation of a rudder sensor or dockside rudder calibration is required. This saves boaters time and money.

Automatic switching

Featuring Continuum steering and support of the SteadySteer™, the NAC -D allows automatic switching between two speed profiles providing optimal steering performance at low and high speeds.

Flexible choice

Choose the controller that matches your preferences from dedicated controllers like the AP™ 44 or AP 48.

Simrad autopilot systems incorporate state-of-the-art electronics and represent more than 70 years of experience. experience and development. Simrad autopilots can reduce your workload and fatigue and improve your situational awareness and safety, helping yout thus arrive cooler at your destination.

Features

Control system interface approved by SeaStar Solutions, Volvo, Yanmar and Yamaha
Control via AP™ 44, AP 48
No need for additional hydraulic pump, rudder sensor or dockside calibration
SteadySteer function ™ included
Steer towards a defined waypoint, heading or turn pattern, such as a U-turn, spiral turn and many others – the NAC™ - D can even initiate a zigzag turn
CAN-bus data connectivity - connection to Optimus steering systems via the CAN-bus data network

NAC-D Autopilot Computer for Wired Control NAC-D is a wired control autopilot solution for ship electronic control system (steering system with digital interface). .

Simrad NAC-D autopilot computer for piwired lotting Related ProductsNavico WR10 Wireless Pilot Controller - Bluetooth
Navico Precision-9 Compass
Simrad HS60 NMEA2000 GPS Compass - Cable Not Included
Simrad OP12 Autopilot Controller
Controller Simrad AP44 Autopilot Controller
Simrad AP48 Autopilot Control Head with Rotary Knob
Simrad HS75 GNSS Compass

Frequently Asked Questions Questions (FAQ) about the Simrad NAC-D fly-by-wire autopilot computer Who is the Simrad?
How to describe the Simrad NAC-D fly-by-wire autopilot computer?
What is the color of the Simrad NAC - D Autopilot Computer f/Steer By Wire?
What is the steering type of the product?
What is the compatibility of this product?
Who is the Simrad? Simrad is part of the Navico family based in Norway, the world leader in marine electronics. Simrad manufactures a complete range of systemsSophisticated marine electronics for the recreational and light commercial markets. Simrad products are based on six main areas of expertise: radar, echo sounder, communications, autopilot, navigation and systems integration. How to describe the Simrad NAC-D fly-by-wire autopilot computer? NAC-D Autopilot Computer for Wired Control NAC-D is a wired control autopilot solution for ship electronic control system (steering system with digital interface). .

NAC-D is an electric steering autopilot solution for ship electronic control systems (steering systems with digital interface).
NAC-D will allow you to control the boat. steering from any location on board, without the need for manual operation.
The autopilot will steer the boat and keep it on course usingant GPS data or following a pre-programmed route.

NAC-D is the world's first autopilot solution for fly-by-wire monitoring systems.
With NAC-D, boaters can now control their vessels with a digital interface.
NAC-D comes with the latest SeaStar Optimus technology and Yanmar VC10/JC10 compatibility.

The Simrad NAC-D autopilot is the perfect solution for your boat. The NAC-D will take care of helming and navigation duties, allowing you to fish, read or simply enjoy the scenery. The NAC-D also has a built-in system that will monitor your boat's vital signs and make sure everything is working properly.

What color is the Simrad NAC-D autopilot computer for steering by thread ? Black

NAC-D is an electric steering autopilot solution for control systemselectronic ship control (steering systems with digital interface).
NAC-D will allow you to control the steering from any location on board, without the need for manual operation.
The autopilot will steer the boat and keep it on course using GPS data or following a programmed pre-route.
NAC-D is the world's first autopilot solution for cable steering systems.
With NAC-D, boaters can now control their vessels with a digital interface.
NAC-D features the latest SeaStar Optimus technology and Yanmar VC10/JC10 compatibility.
The first autopilot approved by Volvo, Yanmar and Yamaha
Control via AP 44, AP 48 or easily integrate your Simrad multifunction
SeaStar Solutions& 174;, Volvo& 174;, Yanmar& 174; and Yamaha& 174; approved control system interface
TheNAC-D is a fully integrated control system that will revolutionize the way you steer your boat.
It is easy to install and takes up very little time and space, so you can enjoy the benefits of autopilot on a wide range of vessels.
With the NAC-D, you have access to all the benefits of autopilot without breaking the bank.

WWhat is the steering type of the product ? Steer-By-WireHow compatible is this product? Control system interface approved by SeaStar Solutions/Volvo/Yanmar and Yamaha

Buy at the best price Simrad NAC-D autopilot computer for steering by wire for only $1,149 from NVN Marine! Fast, free same-day delivery before 3 p.m. Simrad NAC-D Steering-by-Wire Autopilot Computer Technical Specifications

Type:	Marine Navigation & Instruments \| Autopilotsques
Supplier:	Simrad
Weight:	0.5 lbs
Steering type:	Steer- By-Wire

Simrad NAC-D Autopilot Computer for Steering by Wire User ReviewsSimrad NAC-D Autopilot Computer for Steering by Wire Shipping and return Shipping weight:

0.5 lbs

Box sizes:

3.00 (h) x 4.00 (w) x 10.00 (w)

Cubic feet:

120.0

Returnable:

Yes

USPS First Class:

Yes