Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX-1421 - 3 Blades - 14.25" x 21 Pitch Boat Outfitting

Express Mach3™ - Right hand - Stainless steel propeller - EX-1421 - 3 blades - 14.25" x 21 pitch

Using close to 40 years of racing boat experience and expertise in high-performance propeller design, our Express Mach3™ propeller series captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, designs. radical, sharp cup profiles to achieve maximum speed, while providing class-leading handling and acceleration? You got it, and wait for it? p>By upgrading your current propeller from aluminum to stainless steel, or from an older generation design to the latest technology, Express Mach3 Propeller is the best investment you can make in boat improvement . around the competition, and can bring spectacular improvements to performancerances of the boat. The gain in fuel economy can often pay off the cost of a new propeller within a season or two, making it a good investment for your time on the water.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large flow-through exhaust ports free

Turning Point propeller cases have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products.ents. More exhaust flow and less back pressure can generate more power. Like the manifolds for your boat.

Turning Point manufactures Express propellers to fit the 9.9(bigfoot)-300+hp Evinrude, Force, Honda, Johnson, Mariner, Mercruiser , Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha Outboards and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for selectionn of the hub kit.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit P65Warnings.ca. .gov.

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring enhanced acceleration, turning and loading capabilities...
PRODUCT ID: 56033
SKU: NVN-56033
CSKU: CWR-56033
REWRITE: 67144-turning-point-express-mach3-right-hand
MPN: 31502112
UPC: 652480200878
br> br> ASIN: B00TUNZJEA
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31502112
LSKU:
NAME: Turning Point Express Mach3™ - Right-handed - Stainless steel propeller - EX-1421 - 3 blades - 14.25" x 21 pas
NAME_EX: TURNING POINT EXPRESS SS RH PROPELLER 14.25" 21 steps
TYPE: Boat equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts & Accessories

Turning Point Express Ex1421 Stainless Steel 14 Straight Propeller by Hodges Marine
Automotive Parts & Accessories
Gtags:

GSpecs:

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1421 - 3 Blades - 14.25" x 21 Pitch Product Description

Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1421 - 3 blades - 14.25" x 21 pitch

Using nearly 40 years of racing boat experience and design expertise High performance propellers, our Express Mach3™ propeller series captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three-blade propellers excel at achieving maximum speed, while providing best-in-class maneuverability and acceleration. Hole shot? I get it, and hang in there! A turn? We have that too! Maximum speed? We say "No propeller faster on water" for a reason!

By upgrading your current propeller from aluminum to acier stainless, or from an older generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's designs will outperform the competition and can provide dramatic improvements in boat performance. The fuel economy gain can often cover the cost of a new propeller within one or two seasons, making it a wise investment for your time on the water.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs thatwill help you get the most out of your boat's performance.

Large, free-flowing exhaust ports

Turning Point Propeller Housings have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are 3 and 4 blade propeller models, left and right rotation, with a variety of odiameter and pitch options, available for almost all types of boats. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring acceleration , improved shooting and charging. transport capacities...

Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1421 - 3 pa- 14.25" x 21 Pitch Related ProductsDavis Prop Sox
Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Propeller Nuts
High performance waterproof grease for Corrosion Block - 2 oz Tube - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Corrosion Block Waterproof Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Canister - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High-Performance Waterproof Grease - 16 oz Jar - Non-Hazardous, Non-Flammable and Non-Toxic
Forespar Lanocote RuSt & Corrosion Solution Prop and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stopper

Frequently Asked Questions (FAQ) about Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1421 - 3 Blades - 14.25" x 21 Pitch QWhat are Turning Point propellers?
How to describe Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX-1421 - 3 blades - 14.25" x 21 pitch?
Rotation side of the product?
What is the material of the Point Express Mach3™ turning - Right hand - Stainless steel propeller - EX-1421 - 3 blades - Pitch 14.25" x 21?
What is the diameter (inches) of the product?
What is the pitch of the product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. The turning point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and harsh vibrations. It is also the most durable hub system available. How to Describe Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX-1421- 3 blades - 14.25" x 21 pitch? The Express Series is now made from industrial materials - State-of-the-art TP17 stainless steel, ideal for any application requiring improved acceleration, turning and loading capabilities... Product Rotation Side Right

$302

Turning Point Express Mach3™ - Right Hand - Stainless Steel Steel Propeller - EX-1421 - 3 blades - 14.25" x 21 pitch

$280

Type:	Boat equipment \| Propeller
Supplier:	Turning Point Propellers
Weight:	12.75 lbs
Pitch:	21"
Material:	Stainless steel
Diameter (Inches):	14-1/4"
Rotation:	Right
User Guide:	Download PDF
Product Brochure:	Download PDF

Shipping Weight:	12.75 lbs
Box Sizes:	8.00 (h) x 16.00 (w) x 16.00 (w)
Cubic feet:	2048.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you will find our Return Policy and Refund Policy here.