Turning Point Express Mach4 - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch Boat Outfitting

Express Mach4™ - Left - Stainless steel propeller - EX1/EX2-1319-4L - 4 blades - 13" x 19 pitch

The L The propeller that put the "four" in Perfourmance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a cutting edge swept cleaver design for applications from 40 to 150 hp. . the rules, proving that you can use a four-blade that offers unprecedented hole shot, maneuverability and stability in rough water without the loss of high-end speed that you experience with propellers from other manufacturers. Turning Point also produced up to 46% more reverse thrust than other comparable designs in recent testing.

Now manufactured in our industry-leading TP17 stainless steel, the Express Series. Mach4 is perfect for any application that requires enhanced acceleration, speed and speed capabilities.rage and charge. This series of propellers is ideal. suitable for water sports, stern drive boats, tri-toons, bayboats and any vessel that can use the stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Large porFree Flow Exhaust Ts

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like the lintels on your boat.

TournantPoint manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun engines , Suzuki, Tohatsu, Volvo Penta and Yamaha outboard motors and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point accessories workfaster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer, birth defects, or other harm reproduction.active harm For more information, go to P65Warnings.ca.gov.

This series of accessories is very suitable for water sports, fast stern boats, to three toons, bay boats and any boat that can use the stern lift This is our best upgrade to an older stainless...
PRODUCT ID: 63343
SKU. : NVN-63343
CSKU: CWR-63343
REWRITTENTURE: 74454-turning-point-express-mach4- left
MPN: 31431940
UPC: 652480206146
ASIN: B01JSAY8E6
WSKU:
SSKU:
KSKU:
GSKU :
MSKU: 31431940
LSKU:
NAME: Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch
NAME_EX: TURNING POINT EXPRESS SS LH PROPELLER 13" br> TYPE: Boat Equipment
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER ENGINE PARTS> POWERWATER PROPELLERS
Category Amazon: Automotive Parts & Accessories
Turning Point Propellers Inc 31431940 Props Express 13X19 4BL LH
Turning Point Propellers 31431940 Props Express 13X19 4BL LH
Automotive Parts and Accessories
Gtags:

GSpecs:

Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch Product Description

Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 blades - 13" x 19 Pitch

The propeller that put the "four" into performance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 hp applications. These propellers have rewritten the rules, proving that you can use a four blade offering unprecedented holeshot, maneuverability and rough water stability without the loss of top speed you experience with propellers from other manufacturers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

Now made in our industry-leading TP17 stainless steelindustry standard, the Express Mach4 Series is perfect for any application that requires improved acceleration, cornering and loading capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produceRadical new designs that will help you get the most out of your boat's performance. Large, free-flowing exhaust ports Turning Point propeller have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to the competing product. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are 3 and 4 blade propeller models, left and right rotatione, with a variety of diameter and pitch options, available for almost any type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

This series of accessories is very suitable for water sports, fast stern boats, three toons, boats bay and all boats that can use the aft elevator. This is our best upgrade to older stainless steel...

Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - Fits Nuts propeller diameter from 17/32" to 1-1/4"
Anti-corrosion block High performance waterproof grease - 2 oz tube - Non-hazardous, non-flammable and non-toxic
High performance waterproof grease for block Corrosion Block Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - 14 oz Cartridge - Non-Hazardous, Non-Flammable and Non-Toxic
Grease high performance waterproof for corrosion block - 16 oz jar - Non-Hazmat, non-flammable and non-toxic
Forespar Lanocote Rust and corrosion solution, accessory and bottom – 16 oz.
Propeller wrench Galvanized Sea-Dog for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stopper

Frequently asked questions (FAQ) about Turning Point Express Mach4™ - Left hand - Stainless steel Propeller - EX1/EX2-1319-4L - 4 blades - 13" x 19 Pitch Who are Turning propellers Point?
How to describe Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX1/EX2 -1319-4L - 4 blades - 13" x 19 pitch?
Turning side of the product?
br/> What is the material of the Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX1/ EX2-1319-4L - 4 blades - Pitch 13" x 19?
What is the diameter (inches) ) of the product?
What is the pitch of the product?
Who is the Turning propellers? Turning accessories manufactures high performance aluminum and stainless steel propellers. Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors and drives from shifting shock, shock and vibration.ents. It is also the most durable hub system available. How to describe Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX1/EX2-1319-4L - 4 blades - 13" x 19 pitch? This series of propellers is very suitable for water sports, fast boats to stern, three toons, bay boats and any boat that can use the stern lift This is our best upgrade to the old stainless steel... Rotation side of the product? of Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch? Stainless steelWhat is the diameter (inches) of the product? 13"What is the pitch of the product? 19

Save$98 with the purchase of the Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 blades - 13" x 19 pitchfor only $398 at NVN Marine! Same day dispatch before 3pm Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19. Location Technical Specifications

Type:	Boat layout \| Propeller
Supplier:	Turning Point propellers
Weight:	13.8 lbs
Rotation:	Left
Diameter (inches):	13"
Material:	Stainless steel
Not:	19"
User Guide:	Download PDF
Product brochure:	Download PDF

Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2-1319-4L - 4 Blades - 13" x 19 Pitch User ReviewsTurning Point Express Mach4™ - Left - Stainless Steel Propeller - EX1/EX2- 1319-4L - 4 blades - 13" x 19 pitch Expeditedition and return

Shipping weight:	13.8 lbs
Box sizes:	7.00 (h) x 14.00 (w) x 15.00 (w)
Cubic feet:	1,470.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and return policy refund here.