Victron Blue Smart IP22 24VDC 16A 3 banks 120V charger - Dry mounting Electrical

Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount

The Blue Smart IP22 charger is the professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers.

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, five to ten times better than the industry standard.

Adaptive charging algorithmtative in 6 steps: test - volume - absorption - reconditioning - floating - storage

The Blue Smart Charger is equipped with an "adaptive" battery microprocess controlled by the sor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification and sulfation, a major cause of early battery failure.e.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass – absorption – float algorithm.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will connect to a completely discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

In NIGHT or LOW mode, the current output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charging algorithm : TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to adjust: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Specifications:

Input voltage range: 100 - 130 VAC
Charging current, normal mode: 8/12/16 A
Charging current, NIGHT or LOW: 4/6 /8 A
Efficiency: 94%
No-load power consumption: 0.5 W
Frequency: 45 – 65 Hz
Number of outputs: 1
'Absorption' charging voltage: Normal: 28.8V High: 29.4V Li-ion: 28.4V
'Float' charging voltage: Normal: 27.6V High: 27.6V Li-ion: 27.0V
'Storage' charging voltage: Normal: 26.4V High: 26.4V Li-ion: 27.0V
Charging algorithm: 6-level adaptive
Can be used as a power supply: yes
Protection: reverse polarity of the battery (fuse). Output short circuit, overheating
Temp. of operation. Range: -20 to +50°C
Humidity (non-condensing): Max 98%
Bluetooth: Frequency: - 2402-2480MHz / Power: -4dBm

Case Specifications :

Material and color: Aluminum (blue RAL 5012)
Battery connection: Screw terminals 13 mm^2 / AWG6
230 V AC Connection: 1.5 meter cable with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category: IP22
Weight: 1.3 kg
Dimensions (h x w x d): 235 x 108 x 65 mm

Standards :

Safety: EN 60335-1, EN 60335-2-29
Emission: EN 55014-1, EN 61000-6- 3, EN 61000-3- 2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000
Automotive E4-10R

Please contact your reseller for any return, repair or support issues related to this product.

Please contact your reseller for any return, repair or support issues related to this product.to this product. .

PRODUCT ID: 99773
SKU: NVN-99773
CSKU: CWR-99773
REWRITE: 110884-victron-blue-smart-ip22-24vdc -16a-3
MPN: BPC241648102
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON BLUE SMART IP22 24VDC 16A 3 BANK 120V CHARGER
NAME_EX:
PTITLE: Victron Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Amazonry Category:

Gtags:

GSpecs:

Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount Product Description

Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, i.e.inq to ten times better than the industry standard.

6-step adaptive charging algorithm: test - volume - absorption -recondition – float – storage

The Blue Smart Charger is equipped with "adaptive" battery management controlled by microprocessor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratificationand sulfation, a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volt. Will reconnect to a completely discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

In NIGHT or LOW mode, the current of output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

Onze LED for status indication

Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to adjust: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Specifications:

Input voltage range: 100 - 130 VAC
Charging current, normal mode: 8/12/16 A
Charging current, NIGHT or LOW: 4/6 / 8 A
Efficiency: 94%
No-load power consumption: 0.5 W
Frequency: 45 – 65 Hz
Number of outputs: 1
'Absorption' charging voltage: Normal: 28.8V High: 29.4V Li-ion: 28.4V
'Float' charging voltage: Normal: 27.6V High: 27.6V Li-ion: 27.0V
'Storage' charging voltage: Normal: 26.4V High: 26.4V Li-ion: 27.0V
Charging algorithm: 6-stage adaptive
Can be used as a power supply: yes
Protection: reverse polarity of the battery (fuse). Output short circuit, overheatingffe
Temp. of operation. Range: -20 to +50°C
Humidity (non-condensing): Max 98%
Bluetooth: Frequency: - 2402-2480MHz / Power: -4dBm

Housing specifications:

Material and color: Aluminum (blue RAL 5012)
Battery connection: Terminals screw 13 mm^2 / AWG6
230 V AC Connection: 1.5 meter cable with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
Protection category: IP22
Weight: 1.3 kg
Dimensions (h x w x d): 235 x 108 x 65 mm

Standards:

Safety: EN 60335-1, EN 60335-2-29
Emission: EN 55014-1, EN 61000-6-3, EN 61000-3- 2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000
Automotive E4-10R

Please contact your dealer for any return, repair, or support issues related to this product.

Please contact your resoldr for any return, repair or support issues related to this product.

Frequently Asked Questions (FAQ) about VICTRON BLUE SMART IP22 24VDC 16A 3 BANK 120V CHARGER Who is Victron Energy?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel at efficiently combining two or more distinct energy sources, are recognized internationally as the professional choice in resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and much more.

Save $37 on the purchase of the Victron Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount for singleement $211 from NVN Marine! Same day dispatch before 3 p.m. Victron Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount Videos Victron Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Technical Specifications

Type:	Electric \| Battery chargers
Supplier:	Victron Energy
Charger Input - Voltage:	120V
Charger Output - Amps:	16 A
Charger output voltage:	24 V
Charging banks:	3
Mobile:	No
User Guide:	Download PDF
Product manual:	Download PDF
Product brochure:	Download PDF

Victron Blue chargerSmart IP22 24VDC 16A 3 Bank 120V - Dry Mount User Reviews Victron Blue Smart IP22 24VDC 16A 3 Bank 120V Charger - Dry Mount Shipping & Return

For detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.