Sale!
Victron Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting
Victron Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting

Victron Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting

$72

SKU: Victron Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting
Category:

Victron Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting Electrical

Blue Smart IP22 12VDC 30A 1 bank 120V charger - Dry mounting

The Blue Smart IP22 charger is the professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers. 

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, five to ten times better than the industry standard.

Adaptive charging algorithmative in 6 steps: test - volume - absorption - reconditioning - floating - storage

The Blue Smart Charger is equipped with a microprocess "adaptive" battery management controlled by the sor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification and sulfation, a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will connect to a completely discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

In NIGHT or LOW mode, the current output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charging algorithm : TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Please contact your dealer for any returns, repairs or support issues related to this product.

""
PRODUCT ID: 88487
SKU: NVN-88487
CSKU: CWR-88487
REWRITE: 99598-victron-blue-smart -ip22-12vdc-30a-1
MPN: BPC123047102
UPC: 8719076052395
ASIN: B08NY23BKF
WSKU:
SSKU:
KSKU:
GSKU:
MSKU :
LSKU:
NAME: Victron Blue Smart IP22 12VDC 30A 1 bank 120V Charger - Dry mounting
NAME_EX: VICTRON BLUE SMART IP22 12VDC 30A 1 BANK CHARGER 120V
PTITLE: Victron Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> PARTS AND ACCESSORIES FOR WATERCRAFT
Categorye Amazon: CE

Victron Blue Smart Charger IP22 12VDC 30A 1 bank 120V - Dry mounting
CE
Gtags:
Victron Energy

GSpecs:

Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount Product Description

Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount

The Blue Smart IP22 charger is the professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers. 

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, i.e. cinq ten times better than the industry standard.

6-step adaptive charging algorithm: test - volume - absorption -recondition - float - storage

The Blue Smart Charger is equipped with "adaptive" battery management controlled by microprocessor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification andsulfation, a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass – absorption – float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts . Will reconnect to a completely discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

In NIGHT or LOW mode, the current of output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

ElevenLED for status indication

Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Please contact your dealer for any returns, repairs or support issues related to this product.

""

Frequently asked questions (FAQ) About Victron Blue Smart IP22 12VDC 30A 1 bank 120V Charger - Dry mount Who is Victron Energy?
How to describe Victron Blue Smart IP22 12VDC 30A 1 bank 120V Charger - Dry mount?
Who what is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel in the efficient combination of two or more separate energy sources, are recognized internationally as the professional choice for energy storage systems.e resilient. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. How to describe the Victron Blue Smart IP22 12VDC 30A 1 bank 120 V charger - Dry mount? ""

Save $32 when you purchase the Victron Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount for only $182 from NVN Marine! Same day dispatch before 3 p.m. Victron Bleu Intelligent IP2212V DC 30A Charger 1 Bank 120V - Dry Mount Videos Victron Blue Smart IP22 12V DC 30A Charger 1 Bank 120V - Dry Mount Technical Specifications
Type:

Electric | Battery chargers
Supplier:

Victron Energy
Weight:

3.25 lbs
User Guide:

Tedownload PDF
Product manual:

Download PDF
Victron Blue Smart IP22 12VDC 30A Charger 1 Bank 120V - Dry Mount User Reviews Victron Blue Smart IP22 12VDC 30A Charger 1 Bank 120V - Dry Mount Shipping and Return
Shipping Weight:

3.25 lbs
Box Sizes:

3.00 (h) x 7.00 (w) x 11:00 (th)
Cubic feet:

231.0

For detailed shipping policy, please see our shipping policy and you can find our return and return policy refund here.

Related products