Victron Blue Smart IP22 12VDC 20A 1 bank 120V charger - Dry mounting Electrical
Blue Smart IP22 12VDC 20A 1 bank 120V charger - Dry mounting
The Blue Smart IP22 charger is the professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers.
Bluetooth Smart
The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.
High efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, five to ten times better than the industry standard.
Adaptive charging algorithmative in 6 steps: test - volume - absorption - reconditioning - floating - storage
The Blue Smart Charger is equipped with a microprocess "adaptive" battery management controlled by the sor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.
Storage mode: less maintenance and aging when the battery is not used
Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification and sulfation, a major cause of early battery failure.
Also charges Li-ion batteries
Li-ion batteries are charged with a simple mass – absorption – float algorithm.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will connect to a completely discharged Li-ion battery with internal disconnect function.
NIGHT and LOW setting
In NIGHT or LOW mode, the current output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.
Overheat protected
Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charging algorithm : TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.
Please contact your dealer for any returns, repairs or support issues related to this product.The Blue Smart IP22 charger can be used for workshop equipment and automotive vehicles, such as (conventional) cars; motorcycles; boats and campers. Bluetooth Smart Blue...
PRODUCT ID: 88485
SKU: NVN-88485
CSKU: CWR-88485
REWRITE: 99596-victron-blue-smart-ip22-12vdc-20a-1
br> br> MPN: BPC122045102
UPC: 8719076050605
ASIN: B08TRRCZ75
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Victron Blue Smart IP22 12VDC 20A 1 bank 120V charger - dry mounting
NAME_EX: VICTRON BLUE SMART IP22 12VDC 20A 1 bank 120V charger
PTITLE: Victron Blue Smart IP22 12VDC 20A 1 bank 120V charger - dry mounting
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
CE
Victron Blue Smart Charger IP22 12V DC 20A 1 Bank 120V - Dry Mount
CE
Gtags:
Victron Energy |
GSpecs:
Blue Smart IP22 12VDC 20A 1 Bank 120V Charger - Dry Mount Product Description
Blue Smart IP22 12VDC 20A 1 Bank 120V Charger - Dry Mount
The Blue Smart IP22 charger is the professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers.
Bluetooth Smart
The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features become available. available.
High efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 Watt, i.e. cinq ten times better than the industry standard.
6-step adaptive charging algorithm: test - volume - absorption -recondition - float - storage
The Blue Smart Charger is equipped with "adaptive" battery management controlled by microprocessor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.
Storage mode: less maintenance and aging when the battery is not used
Storage mode comes into play whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification andsulfation, a major cause of early battery failure.
Also charges Li-ion batteries
Li-ion batteries are charged with a simple mass – absorption – float algorithm.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts . Will reconnect to a completely discharged Li-ion battery with internal disconnect function.
NIGHT and LOW setting
In NIGHT or LOW mode, the current of output is reduced to the maximum. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.
Overheat protected
Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.
ElevenLED for status indication
Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.
Please contact your dealer for any returns, repairs or support issues related to this product.The Blue Smart IP22 charger can be used for automotive equipment and vehicles in the workshop, such as (classic) cars; motorcycles; boats and campers. Bluetooth Smart Blue...
Frequently asked questions (FAQ) about Victron Blue Smart IP22 12VDC 20A 1 bank 120V Charger - Dry mount Who is Victron Energy?
How to describe Victron Blue Smart IP22 12VDC 20A 1 bank 120V charger - Dry mounting?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel in communicationefficient combination of two or more distinct energy sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. How to describe the Victron Blue Smart IP22 12VDC 20A 1 bank 120 V charger - Dry mount? The Blue Smart IP22 charger can be used for equipment and motor vehicles in the workshop, such as (conventional) cars; motorcycles; boats and campers. Bluetooth Smart Blue...
Save $26 on the purchase of the Victron Blue Smart IP22 12VDC 20A 1 bank 120 V charger - Dry mount for only $152 from NVN Marine! Same day dispatch before 3 p.m. Victron Blue Smart IP22 12VDC 20A 1 bank 120V charger - Dry mounting Victron VideosBlue Smart IP22 12VDC 20A 1 Bank 120V Charger - Technical Specifications
Type: | Electric | Battery chargers |
---|---|
Supplier: | Victron Energy |
Weight: | 3.2 lbs |
User Guide: | Download PDF |
Product Manual: | Download PDF |
3.2 lb
3.00 (h) x 7.00 (w) x 11.00 (w)
231.0
For detailed shipping terms , please review our shipping policy and you can find our return and refund policy here.
- Victron Blue Smart IP22 12VDC 15A 3 banks 120V charger - Dry mounting
- Victron Blue Smart IP22 12VDC 15A 1 bank 120V charger - Dry mounting
- Victron BatteryProtect BP-65 - 65AMP - 6-35 VDC
- Victron BatteryProtect BP-220 - 220AMP - 6-35 VDC
- Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC
- Victron 275A Battery Switch 12-48VDC Surface or Panel Mount
- Victron Battery Monitor - BMV-702 - Gray