Barton Marine Laser Replica Outhaul Assembly f/Laser Dinghy Sailing

Laser Dinghy Laser Replica Exit Kit

The Barton Exit Kit is class legal and offers the same purchase as standard installed systems. Our release is simple, lightweight and strong and comes with a simple toggle release for the mainsheet clew.

Contains:

00 110 Series 0 Single Fixed Eye (mounted on the short red line)
00 111 Series 0 Single Fixed Eye Ring (mounted on the primary red line)
00 Single fixed eye 110 Series 0, (attaches to swan neck using twisted shackle or line - not supplied)
Primary line 2m x 4mm red dyneema, Short strop 0.24m x 4mm red dyneema
Secondary line 4m x 4mm blue line, Elastic 1.5m x 4 mm

Assembly instructions:

Step 1:

Take the short red tie with the block and loop it into the base of the cleat above the arrow. You will have totemporarily undo the secondary blue line and remove it from the block and block with the ring. Re-attach the line when the strop is installed.

Step 2:

a.The main red line passes through point d 'listening to the sail
b. Loop through the boom end fitting
c. Pass the end of the rope through the loop to secure it. This is easy to undo once ashore

Step 3:
The secondary blue control line is brought to the gooseneck through the block 00 110 which can be attached. through the hole in the gooseneck fitting or use a twist shackle (accessories not supplied). The control line continues to the base fitting of the mast and then to the base of the cleat.

Step 4:

a . The elastic is passed through the short strop and passed under the boom and then through the clew of the sail
b. The lineIt then comes back under the boom on the other side and is tied into the loop of the Elastic.

Barton fittings are high quality replacements that perform the same function as the part original. They should not be confused with official pieces bearing the Laser trademark. They cannot be used if you are sailing at an Association event. However, they are perfect for social sailing, sailing schools, sailing clubs or training. Laser is a registered trademark owned by Velum Limited and currently used under license in Europe by Laser Performance (Europe) Limited.

Barton Marine Equipment Limited is completely independent of Laser Performance (Europe) Limited and Velum Limited . .

The Barton overhaul assembly is a class legal donation, which is the same as the standard system installation. Features 00 Series 0 110 Monocular Attachment (suitable for short red lines)00...
PRODUCT ID: 66891
SKU: NVN-66891
CSKU: CWR-66891
REWRITE: 78002-barton-marine-laser-replica-outhaul-assembly-f-laser
br> MPN: 98076
UPC: 5035088980765
ASIN: B076DQNJ1L
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Barton Marine Laser Replica Outlet Assembly for Laser Dinghy
NAME_EX: BARTON MARINE REPLICA OUTLET ASSEMBLY FOR DINGHY LASER
PTITLE: Barton Marine Laser Replica Outlet Assembly for Laser Dinghy
TYPE: Sailing | Blocks
SELLER: Barton Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERCRAFT PARTS & ACCESSORIES> SAILBOAT PARTS
Furniture
Replica Assembly of laser replica Barton Marine f/Laser Dinghy
Barton Marine Laser Replica Outhaul Assembly FLaser Dinghy by Hodges Marine
Furniture
Gtags:

GSpecs:

Barton Marine Laser Replica Outhaul Assembly f/Laser Dinghy Product Description

Replica Laser Outhaul Assembly f/Laser Dinghy

The Barton Outhaul Assembly is class legal and offers the same purchase as standard installed systems. Our release is simple, lightweight and strong and comes with a simple toggle release for the mainsheet clew.

Contains:

00 110 Series 0 Single Fixed Eye (mounted on the short red line)
00 111 Series 0 Single Fixed Eye Ring (mounted on the primary red line)
00 Single fixed eye 110 Series 0, (attaches to swan neck using twisted shackle or line - not supplied)
Primary line 2m x 4mm red dyneema, Short strop 0.24m x 4mm red dyneema
Secondary line 4m x 4mm blue line, Elastic 1.5m x 4 mm

Assembly instructions:

Step 1:

Take the red short tie with the block and roll upz it in the base of the cleat above the arrow. You will need to temporarily disable the secondary blue line and remove it from the block and block with the ring. Reattach the line when the strop is installed.

Step 2:

a.The main red line passes through the clew of sailing
b. Loop through the boom end fitting
c. Pass the end of the rope through the loop to secure it. This is easy to undo once ashore

Step 3:
The secondary blue control line is brought to the gooseneck through the block 00 110 which can be attached. through the hole in the gooseneck fitting or use a twist shackle (accessories not supplied). The control line continues to the base of the mast connection then to the base of the cleat.

Step 4:

has. The elastic is passed through the short strop and passed sou the boom then through the clew of the sail
b. The line then returns under the arrow on the other side and is tied into the loop of the Elastic.

Barton fittings are high quality replacements that perform the same function as the Barton fittings. Original part. They should not be confused with official parts bearing the Laser trademark. They cannot be used if you are sailing at an Association event. However, they are perfect for social sailing, sailing schools, sailing clubs or training. Laser is a registered trademark owned by Velum Limited and currently used under license in Europe by Laser Performance (Europe) Limited.

Barton Marine Equipment Limited is completely independent of Laser Performance (Europe) Limited and Velum Limited . .

The Barton overhaul assembly is a class legal donation, which is the same as the installation of the st systemandard. Features 00 0 Series Monocular Attachment 110 (suitable for short red lines) 00...

Frequently asked questions (FAQ) about the output assembly of Barton Marine Laser Replica for /Laser Dinghy Who is the Barton Marine?
How to describe the Barton Marine Laser Replica Output Set for /Laser Dinghy?
Who is the Barton MARine? Barton continually strives to offer the highest quality products made from high quality materials at realistic and affordable prices. New products are constantly designed and developed. Barton is proud of the fact that over 95% of its products are manufactured in Whitstable, allowing Barton to always guarantee high quality. How to describe the Barton Marine Laser Dinghy Replica Output Assembly? The Barton overhaul assembly is a class legal donation, which is the same as the standard system installation. Characteristics 00 Series 0 Monocular Attachment 110 (fits short red lines) 00...

Save $22 when you purchase the Output Kit marine laser replica Barton f/ Laser Dinghyfor only $66 from NVN Marine! Same day dispatch before 3 p.m. Barton Marine Laser Replica Outhaul Assembly f/Laser Dinghy Technical Specifications

Type:	Sail \| Blocks
Seller:	Barton Marine
Weight:	0.4 lbs

Barton Marine Laser Replica Outhaul Assembly f/Laser Dinghy User ReviewsBarton Marine Laser Replica Outhaul Assembly f/Laser Dinghy Shipping & Returns

Shipping Weight:	0.4 lbs
Box sizes:	1.00 (h) x 9.00 (w) x 12.00 (w)
Cubic feet:	108.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our returns and refunds policy here.