Blue Sea 7620 ML Series Auto Load Relay (Magnetic Latch) 12V DC Electrical

The 500 amp magnetic latching (bi-stable) relay automatically combines the batteries during charging and isolates the batteries when discharging and when starting the engine.

Blue Sea 7620BSS Attributes

Operating voltage: 12 volts
Rated current: 120 A continuous/210 A intermittent

Blue Sea 7620BSS Features and benefits

Automatically manages the load of two large battery banks
Allows battery banks to be paralleled for emergency starting
Continuous 500 amp rating to support high efficiency alternators
Magnetic Latch (ML) - The ACR draws very low current in "ON" or "OFF" mode and draws moderate current for a very short time when changing state.
Dual Sensing - Detects the charge on both batteries
Isolation Start (SI) - Can be configured for temporary isolationHousehold loads from the motor circuit while the motor is starting to protect sensitive electronics.
Motor Isolation (EI) - Can be configured to isolate two motors while both are running to protect the electronics of the engine and maximize the output of the alternator. Load sensing on two battery banks.
LED output to remotely indicate when batteries are combined, isolated, in voltage lock or starting or cranking. Insulation
Tin-plated copper studs for maximum conductivity and corrosion resistance/Silver alloy contacts provide high reliability for active load switching
No warranty from supplier

Blue Sea 7620BSS Installation Instructions

990180180-005.pdf

7620

Manual control: No
Coil voltage: 12 V DC

Combine thes battery banks during charging and insulates them when discharging
500 amps continuous suitable for use with large battery banks, starters, alternators and inverters/chargers
Includes Contura ML Series Remote Control Switch PN 2146
Silver alloy contacts provide high reliability
3/8" ccopper studs, using Blue Sea Systems' superior one-piece stud technology, suitable for 300 amp continuous voltage rating and large cable connections

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. More information,

Blue Sea Systems ML Series Automatic Load Relay Providedt a 500 A magnetic latching (bistable) relay, which automatically assembles the battery when charging and isolates the battery when discharging and starting the engine. Magnetic latching (ML) relays draw very little current in the on state. Start-up isolation (SI) can be configured to temporarily isolate the household load from the motor circuit during motor starting to protect sensitive electronic equipment. Motor Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and maximize alternator efficiency. The manual override button provides added safety, allows control when powering on or off, and provides a lockout function during maintenance. The LED output can remotely indicate the status of the switch. An optional LED or a remote-controlled Contura switch with LEDintegrated is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. One-piece stainless steel flange nuts ensure a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for live switches.
PRODUCT ID: 32562
SKU: NVN-32562
CSKU: CWR-32562
REWRITE: 43673-blue-sea -7620-ml-series- automatic load relay
MPN: 7620
UPC: 632085076207
ASIN: B001C7CJHC
WSKU: BSS7620
SSKU: BS-7620
KSKU: B6Z7620BSS
br>GSKU:
MSKU:
LSKU: 661-7620
NAME: Blue Sea 7620 ML-Series Automatic Load Relay (Magnetic Latch) 12 VDC
NAME_EX: BLUE SEA 7620 ML LOAD RELAY ACR 12V 500A
PTITLE: Blue Sea 7620 ML Series Auto Load Relay (Magnetic Latch) 12VCC
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Blue Automatic Charging Relays Sea Systems (ACR)
Blue Sea 7620 MlSeries Automatic Load Relay Magnetic Latch 12vdc by Hodges Marine

Gtags:

Switch
Safety switch

Specifications G:

Blue Sea 7620 ML Series Automatic Charging Relay (Magnetic Latch) 12V DC Product Description

500 amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting the engine.

Blue Sea 7620BSS Attributes

Operating voltage: 12 volts
Rated Ampere: 120A Continuous/210A Intermittent

Blue Sea 7620BSS Features and Benefits

Automatically manages the charging of two large battery banks
Allows battery banks to be paralleled for emergency starting
500 amp continuous rating to support alternators High Efficiency
Magnetic Latch (ML) - The ACR draws very low current in "ON" or "OFF" states and draws moderate current for a very short time when changing statest.
Dual Sensing - Detects the load on both battery banks
Start-up Isolation (SI) - Can be configured for temporary use.y Isolation of household loads from the circuit motor during motor startup to protect sensitive electronics.
Motor Isolation (EI) - Can be configured for isolation of two motors while both are running to protect motor electronics and optimize the alternator output. On two battery banks
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout or in start or motor isolation
Tinned copper studs for maximum conductivity and corrosion Silver alloy/resistance contacts provide high reliability for active load switching
No supplier warranty

Blue Installation Instructions Sea 7620BSS

990180180-005.pdf

7620

Manual control: No
Coil tension: 12V DC

Combines battery banks during charging and isolates them when discharging
500 amp continuous rating suitable for use with large battery banks, starters, alternators and inverters/chargers
Includes Contura ML Series Remote Control Switch PN 2146
Silver alloy contacts provide high reliability
3/8" copper studs, using Blue Sea Systems' superior one-piece stud technology, rated for 300 amps continuous voltage rating and large cable connections

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp) , known to the State of California to cause cancer, birth defects, or other reproductive harmion. For more information,

The Blue Sea Systems ML Series Automatic Charging Relay provides a 500A magnetic latching (bistable) relay, which automatically assembles the battery when charging and isolates the battery when discharging and starting the engine. Magnetic latching (ML) relays draw very little current in the motor. in running state. Startup Isolation (SI) can be configured to temporarily isolate the house load from the motor circuit during motor starting.protecting sensitive electronic equipment. Motor Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and optimize alternator power. Manual override button provides added security, provides power on/off control and provides lock functionuage during maintenance. The LED output can remotely indicate the status of the switch. Optional LED or remote controlled Contura switch with integrated LED is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. One-piece stainless steel flange nuts ensure a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for live switches.

Blue Sea 7620 ML Series Auto Load Relay (Magnetic Latch) 12V DC Related ProductsBlue Sea Series 2146 MLitch Contura Sw Remote Control - ON-OFF-ON
1 AWG Red Ancor Battery Cable - Sold by the foot
Ancor Red Battery Cable 1/0 AWG - Sold by the Foot
Ancor Red Battery 2/0 AWG Cable - Sold by the Foot
Anco Heavy Duty Terminalsr - 1 gauge wire - 3/8" post - Pack of 2
Ancor heavy duty terminals - 1/0 gauge wire - 3/8" post - 2 pack
Ancor heavy duty terminals - 1/0 gauge wire 2/0 gauge - 3/8" post - Pack of 2
Ancor red battery cable 3/0 AWG - Sold by the foot
Ancor red battery cable 4/0 AWG - Sold by the foot
Ancor Heavy Duty Terminals - 3/0 Gauge Wire - 3/8" Post - 2 Pack

Frequently Asked Questions (FAQ) for the Blue Sea 7620 Series Automatic Load Relay ML (Magnetic Latch) 12V DC Who is Blue Sea Systems?
How to describe the Blue Sea 7620 Series ML (Magnetic Latch) (Magnetic Latch) 12V DC Automatic Load Relay?
What is the policy Warranty for Blue Sea Series 7620 ML Auto Load Relay (Magnetic Latch) 12V DC?
What is the working voltage of the product?
What is the product type?
What is the color of the Blue Sea 7620 ML-Series Automatic Load Relay (Magnetic Latchque) 12 V DC?
What is the amperage of the product?
What are the dimensions of the product?
What is the warranty policy of the product?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7620 ML Series Automatic Load Relay (Magnetic Latch) 12V DC? The Blue Sea Systems ML Series Automatic Charging Relay provides a 500 A magnetic latching (bistable) relay, which automatically assembles the battery when charging and isolates the battery during discharging and starting of the engine. MagMagnetic latching (ML) relays consument a very low current in the on state. Start-up isolation (SI) can be configured to temporarily isolate the household load from the motor circuit during motor starting to protect sensitive electronic equipment. Motor Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and optimize alternator power. The manual override button provides added safety, allows control when powering on or off, and provides a lockout function during maintenance. The LED output can remotely indicate the status of the switch. Optional LED or remote controlled Contura switch with integrated LED is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. Flange nutsThe one-piece stainless steel assembly ensures a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for live switches. What is the warranty policy for Blue Sea 7620 ML Series Automatic Load Relay (Magnetic Latch) 12V DC? Lifetime

Magnetic Latch (ML): The ACR draws very low current (<40 mA to monitor terminal voltage) in the "ON" or "OFF" states ", and draws moderate current for a very short time when changing state
Allows two battery banks to be efficiently charged from a single charging source without external regulators or isolators
Rated voltage: 12 V
Motor isolation: Yes
Operating current: 13 mA
Operating current when changing state : <7.0 A
Switching current under voltage: 300 Aat 12 V DC
Continuous rating: 500 A
Intermittent rating: 700 A
Required cable size: 4/0AWG
Terminal Stud Size: 3/8"
Weight: 2.04 lbs
Dual sensing; detects charge in each battery bank
Approvals : meets ISO 8846 and SAE J1171 external ignition protection requirements, CE marked, IP66 rated
Combiner 30 s: 13.5 V
Combiner 90 s: 13.0 V
10 sec open: 12.35 V
30 sec open: 12.75 V
High open: 16.2 V
Start isolation or motor isolation allows selection of which bank to isolate during current peaks to protect sensitive electronics or motor control systems
Ignition protected can be; installed in engine rooms of gasoline-powered boats
Operated by remote switch; eliminates long, heavy-gauge cables
LThe remote switch (included) provides an emergency combine function to start the engine or make a radio call
LED indicators on the switch indicate operating mode
Can be easily connected to ML series battery disconnect switches using bonding bus plates
Lifetime warranty

$131

Blue Sea 7620 ML Series Automatic Load Relay (Magnetic Latch) 12 VDC

$181

Type:	Management the electric battery \| p>
Supplier:	Blue Sea Systems
Weight :	1.95 lbs
Product Manual:	Download PDF
Product brochure:	Download PDF

Shipping Weight:	1.95 lbs
Box Sizes:	3.00 (h) x 7.00 (w) x 12.00 (w)
Cu ftbes:	252.0
Returnable:	Yes
P65:	Yes

For For detailed shipping terms, please see our Shipping Policy and you will find our Return Policy and Refund Policy here.