Control head for UFlex Power A Mark II twin engines with trim Boat Outfitting

Power A Mark II
Electronic Control System - Twin Engines with Trim

Easy to install Power A Mark II control system provides fingertip operation of the levers accelerator and gear change.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improves fuel economy, a high idle feature to increase revs where a slower idleLift is required for cold engine operation, programmable trolling valve control and neutral heat.
The sleek, ergonomic control makes the Power A Mark II suitable.for many types of applications ranging from boats to sport, yachts and commercial applications.
Available with and without trim, the control features audible and visual interfaces that alert the operator to the current status of the control system.
With the ability to control up to 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
The Power A Mark II's single control unit display provides a simple keypad touch programming with descriptive information regarding system configuration, tuning and diagnostics. The Power A Mark II is a system that can replace mechanical controls on either fully mechanical motors orfully electronic motors, or on motors with the combination of both characteristics.

Technical characteristics:

Single lever/double function and double lever/ dual function for shifting, throttle and trolling
Up to 4 control stations
Power supply: men 9 max 32V
Operating temperature: -25°C to +75°C
Control station functions:

- Selection of station
br>
- Engine warm-up

- High idle

- Docking

- Engine synchronization

- Trolling valve
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100%, frequency from 200Hz to 1kHz)
  
  - Current (4 - 10 mA)
  
  Digital throttle output:
  
  - SAE J 1939
  
  - NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5 V)
  
  - PWM (0-100%, frequency 100 Hz to 1 kHz)
  
  - Current (4 - 20 mA)
  
  Electric shift control:

- 2 or 3 ON/OFF or proportional solenoids

- Fully shift delays adjustable

Safety devices:

Start protection in gear (start inhibition with gear change)
Audible and visual diagnostic alarm in the event of a fault (ADABLE REMESSAGES ON THE CONTROL UNIT DISPLAY)
Proportional gear shift delays
Programmable working parameters
Complies with CEI EN 60945 standards

EMC certification and CE MARK
Complies with:

IEC EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH ALL MECHANICAL THROTTLE ENGINES

COMPATIBILITY WITH TALL ELECTRONIC THROTTLE ENGINES

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.

The Power A Mark II electronic actuators cannot be installed in rooms where anti-ignition devices are required.

Power A Mark II 42012V Dual electronic controls with trim function The easy-to-install PowerA Mark II control system provides fingertip control. accelerator and gear lever. This single-function or dual-function control system uses reliable and precise digital data transmission, and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines. -edge.
PRODUCT ID: 45998
SKU: NVN-45998
CSKU: CWR-45998
REWRITE: 57109-uflex-power-a-mark-ii-twin-engines
MPN: 42012V
br> UPC: 702755040347
ASIN: B08C2B2V7R
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: UFlex Power A Mark II Control Head for Twin Engines with Trim
EX_NAME: UFLEX POWER A PA2-B2T DOUBLE LEVER CONTROL HEAD WITH TRIM
PTITRE: UFlex Power A Mark II Twin Engine Control Head with Trim
TYPE: Boat Equipment | Engine Controls
SELLER: Uflex USA
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS
Sports
Uflex Power A Mark II Double Motor Control Head with Trim
Power A Mark II 42012V Dual Electronic Control with Trim
Sports
Gtags:

GSpecs:

UFlex Power A Mark II Twin Engine Control Head with Trim Product Description Power A Mark II
Electronic Control System - Twin Engines with Trim

The Power A is easy to operate install The Mark II control system provides fingertip operation of the throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improves thefuel economy, a high idle function to increase rpm where a higher idle is needed for cold engine operation, programmable trolling valve control and neutral warm-up.
The StylingThe stylish, ergonomic control makes the Power A Mark II suitable for many types of applications ranging from sport boats, yachts and commercial applications. Available with and without trim, the control features audible and visual interfaces that alert the operator of the current status of the control system.
With the ability to control up to 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
The single control The Power A Mark II's unit display provides simple touchpad programming with descriptive information regarding system configuration, adjustment and diagnostics.
The Power A Mark II is a system that can replace mechanical controls either with fully mechanical controls. motors, or on fully electronic motors, or on motors combining both characteristics.

Technical characteristics:

Single/double function and double lever Lever/dual function for shifting, throttle and trolling
Up to 4 control stations
Power: min 9 max 32V
br>
Operating temperature: -25°C to +75°C
Control station functions:

- Station selection
br>
- Engine warm-up

- High idle

- Docking

- Engine synchronization

- Trolling valve
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100%, frequency from 200Hz to 1kHz)
  
  - Current (4 - 10mA)
  
  Digital throttle output:
  
  >- SAE J 1939
  
  - NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5 V) )
  
  - PWM (0-100%, frequency from 100 Hz to 1 kHz)
  
  - Current (4 - 20 mA)
  
  Electric shift control:

- 2 or 3 ON/OFF or proportional solenoids

- Fully adjustable shift delays

Safety devices:

Start PROTECTION in gear (start inhibition with gear change)
Diagnostic alarm audible and visual (MESSAGES READABLE ON THE CONTROL DISPLAY)
Proportional speed change delays
Programmable working parameters
Complies with CEI EN 60945 standards

EMC certification and CE MARK
Complies with:

IEC EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH EVERYONEMECHANICALLY THROTTLE ENGINES

COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD- Volkswagen, Hyundai etc.

Power A Mark II electronic system actuators cannot be installed in rooms where anti-ignition devices are required.

Power A Mark II 42012V Dual electronic controls with trim function The easy-to-install PowerA Mark II control system provides fingertip operation of the accelerator and shift lever. This single-function or dual-function control system uses reliable and precise digital data transmission and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines. edge.

Frequently asked questions (FAQ) aboutUFlex Power A Mark II Twin Motors Control Head with Trim Who is Uflex USA?
How to describe the UFlex Power A Mark II Twin Motors Control Head with /Trim?
Who is Uflex USA? UfLex's commitment to providing the highest quality products and services is matched only by its commitment to developing new products using the latest materials and technologies to enhance the customer's browsing experience. From steering wheels to sophisticated electronic controls, Uflex USA has everything you need to ensure your boat will look and perform its best for many, many years. How to describe the UFlex Power A Mark II Twin Motors Control Head with Trim? Power A Mark II 42012V Dual electronic control with trim function The easy-to-install PowerA Mark II control system provides fingertip operation of the accelerator and shift lever. This control systemThe single-function or dual-function uses reliable and precise digital data transmission and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines.

Power A Mark II& 153; The control system provides fingertip operation of the throttle and gear shift levers.
Using reliable and precise digital data transmission, this system is the ultimate in simplicity.
With a simple installation process, this is a great solution for boat owners looking for a high quality system at an affordable price.

Twin engines with trim, for the most realistic flight experience.
Power A Mark II& 153; Control system with fingertip throttle and shift levers for easy operation.
Digital data transmission, for reliable use and precise control.

Power A Mark II& 153; Twin engines with trim
Easy to install
Fingertip control of throttle and shift levers
Reliable and precise digital data transmission

Save $671 on the purchase of the UFlex Power A Mark II Twin Motor Control Head with Trim b> for only $1,409 from NVN Marine! Free same day delivery before 3 p.m. UFlex Power A Mark II Twin Motor Control Head with Trim Videos UFlex Power A Mark II Twin Motor Control Head with Trim Technical Specifications

Type:	Boat layout \| Motor Controls
Seller:	Uflex USA
Weight:	4.15 lbs
User Guideur:	Download PDF
Product brochure:	Download PDF

UFlex Power A Mark II Twin Motor Control Head with Trim User Reviews Gueon le 2020-07-08 Excellent value for money!

Works perfectly!

UFlex Power A Mark Control head II Twin Engines with Trim Shipping & Returns

Shipping Weight:	4.15 lbs
Box sizes:	5.00 (h) x 7.00 (w) x 9.00 (w)
Cubic feet:	315.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find ourreturn and refund policy here.