Icom M510BB GW 21 Black Box VHF with white control microphone and 3 control microphone ports Communication
M510BB GW 21 Black Box VHF with white control microphone and 3 control microphone ports
The Icom M510BB is perfect for boats that need the 'AIS to receive functionality without taking up valuable space at the helm. . The supplied white CommandMic™ provides all safety and communication functions for commercial and recreational boaters.
Clean installation for limited helm space
The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out of sight, placing it up to 60 feet (18.3 m)* from the CommandMic™.
*Two OPC-1541 cables are required for installation 60 feet away
CommandMic™ Stations
Add up to two additional CommandMic™ microphones for boats requiring two or three communications stations. Expand auto communication pointsheart of the boat, notably the cockpit, the flybridge and the tower. Access intercom functions for one-to-all or one-to-one communications on the boat.
AIS reception
The M510BB includes a receiver Integrated AIS, perfect for remote station information via the CommandMic™, or integrated with the NMEA 2000 bus to display radar and chartplotter information on an MFD (multi-function display).
DSC and remote control functionality
In addition to the conveniently located bus DSC button on the rear of each CommandMic™, the M510BB introduces a dedicated DSC remote control terminal (EN 300 338-8 compliant ), allowing connection to an external device to centralize control of emergency communications.
NMEA200 and NMEA 0183-HS
The network NMEA 2000 provides plug-and-play data communication to interconnect other marine equipment, such as an MFD (multifunction display).The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.
Class D DSC functionality
On the back of each CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.
Powerful one-way Hailer RX
Built-in 15W amplifier boosts sound output from an external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You may also hear foghorn patterns coming from the bullhorn speaker.
Active noise cancellation
The active noise cancellation feature noise digitally removes noisebackground of audio transmission and reception to provide clear communications in noisy maritime environments.
Features:
- AquaQuake™ function
- Anchor watch function
Specifications:
- Control microphone color: white
- Remote stations: up to 3
- Output power: 25 W
- GPS: Internal GPS GNSS receiver, with external GPS antenna connection
- NMEA: NMEA 2000/ NMEA 0183 -HS
- Waterproof rating: IPX7
- Frequency range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz
- Usable channels: USA, INT, CAN, WX channels
- Broadcast type: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS) *
- Power requirement: 13.8 V DC nominal (11.7 - 15.9 V DC) (negative ground)
- Current consumption (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5A (one CommandMic™) 4.0 A (two CommandMic™ and one RX Megaphone)
- Operating temperature range: –20°C to 60°C / –4°F to 140°F
- Antenna impedance: 50 Ω nominal
- Dimensions (W x H x D) (projections not included): RF unit - 216 × 79 × 113 mm; 8.5 × 3.1 × 4.4 inches / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 inches
- Approximate weight: RF unit - 890 g; 2 lb / CommandMic™ - 400 g; 14.1 ounces
TransSpecifications:
- Output power (at 13.8 VDC): 25 W, 1 W (up, down)
- Max. Frequency deviation: +/- 5 kHz
- Frequency tolerance: +/- 0.5 kHz
- Spurious emissions: less than –70 dBc (high power), less than – 56 dBc (low power)
- Residual modulation: more than 40 dB
- Adjacent channel power: more than 70 dB
Receiver Specifications:
- Sensitivity: FM (at 12 dB SINAD): 0.22 μV typical / DSC (at 1% BER): –7 dBμ emf typical
- Adjacent channel selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
- Spurious response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
- Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf
- Mood and Noise: Over 40 dB
- Audio Output Power: CommandMic™ - Over 2 W (4 Ω, 10% distortion) / Megaphone Rx - Over 15 W (4 Ω)
PRODUCT ID: 100072
CSKU: CWR-100072
REWRITE: 111183-icom-m510bb-gw- 21-black-box-vhf
MPN: M510BB GW 21
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: NAME: ICOM M510BB GW 21 BLACK BOX VHF WITH WHITE CONTROL MIC AND 3
NAME_EX:
PTITLE: Icom M510BB GW 21 Black Box VHF with white control MIC and 3 control mic ports
TYPE: Communication | VHF - Fixed support
SELLER: Icom
ELECTRONICS> ELECTRONICSE MARINE> MARINE RADIOS
Gtags:
GSpecs:
Icom M510BB GW 21 Black Box VHF with white control microphone and 3 control microphone ports Product description
M510BB GW 21 Black Box VHF with white control microphone and 3 control microphone ports
Icom's M510BB is perfect for boats that need AIS to accommodate functionality without taking up valuable space at the helm. The supplied white CommandMic™ provides all safety and communication functions for commercial and recreational boaters.
Clean installation for limited helm space
The M510BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out of sight, placing it up to 60 feet (18.3 m)* from the CommandMic™.
*Two OPC-1541 cables are required for installation 60 feet away
CommandMic™ Stations
Add up to two additional CommandMic™ microphonesires for boats requiring two or three communication stations. Extend communication points around the boat, including the cockpit, flybridge and tower. Access intercom functions for one-on-one or one-on-one communications on the boat.
AIS Reception
The M510BB includes a built-in AIS receiver, perfect for remote station information via the CommandMic™, or integrated into the NMEA 2000 bus to display radar and chart plotter information on an MFD (multi-function display).
DSC and Remote Control functionality
In addition to the DSC button conveniently located on the rear of each CommandMic™, the M510BB introduces a dedicated DSC remote control terminal (EN 300 338-8 compatible), allowing connection to a external device to centralize control of emergency communications.
NMEA200 and NMEA 0183-HS
The NMEA 2000 network provides a connectionplug-and-play data communication to interconnect other marine equipment, such as an MFD (Multi-Function Display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.
Class D DSC functionality
On the back of each CommandMic™ is a conveniently located DSC button. Once triggered, the M510BB transmits a DSC alert signal to nearby vessels with the MMSI* and GPS location of your vessel. *MMSI number must be obtained and programmed for each vessel/radio.
Powerful one-way Hailer RX
Built-in 15W amplifier boosts sound output from an external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You may also hear foghorn patterns coming from the bullhorn speaker.
Active Noise Cancellation
Active Noise Cancellation feature digitally removes background noise from audio transmission and reception to provide communications clear in noisy maritime environments.
Features:
- AquaQuake™ function
- Anchor watch function
Specifications:
- Control mic color: white
- Remote stations: up to 3
- Output power: 25W
- GPS: Internal GNSS GPS receiver, with external GPS antenna connection
- NMEA: NMEA 2000/ NMEA 0183 -HS
- Waterproof rating: IPX7
- Frequency range: Tx - 156.025 157.425 MHz / Rx - 156.050 163.275 MHz / DSC - 156.525 MHz
- Channels Usable: USA, INT, CAN, WX channels
- Program type: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*
- Power requirement: 13.8 Rated DC V (11.7 15.9 VDC) (masse negative)
- Current drain (at 13.8 V DC): TX Max. power - 5.5 A Max. / RX Max. audio - 1.5 A (one CommandMic™) 4.0 A (two CommandMic™ and one RX loudspeaker)
- Operating temperature range: –20°C to 60°C / –4 °F to 140°F
- Antenna impedance: 50 Ω nominal
- Dimensions (W x H x D) (projections not included): RF unit - 216 × 79 × 113mm; 8.5 × 3.1 × 4.4 inches / CommandMic™ - 67.5 × 144.5 × 37 mm; 2.7 × 5.7 × 1.5 inches
- Approximate weight: RF unit - 890 g; 2 lb / CommandMic™ - 400 g; 14.1 oz
Transmitter Specifications:
- Output Power (at 13.8V DC): 25W, 1W (high, low)
- Max. Frequency deviation: +/- 5 kHz
- Frequency tolerance: +/- 0.5 kHz
- Spurious emissions: less than –70 dBc (high power), less than – 56 dBc (low power)
- Residual modulation: more than 40 dB
- Adjacent channel power: more than 70 dB
Receiver specifications:
- Sensitivity: FM (at 12 dB SINAD): 0.22 μV typical / DSC (at 1% BER ): –7 dBμ emf typical
- Adjacent channel selectivity: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
- Spurious response: FM - More than 70 dB / DSC (1% BER) - More than 73 dBµ emf
- Intermodulation: FM - More than 75 dB / DSC (1% BER) - More than 68 dBµ emf
- Mood and Noise: Over 40 dB
- Audio Output Power: CommandMic™ - Over 2 W (4 Ω, 10% distortion)/ Megaphone Rx - Over 15 W (4 Ω)
Save $449 when you purchase the Icom M510BB GW 21 Black Box VHF with White Control Mic and 3 Control Mic Portsfor only $799 from NVN Marine! Free same day delivery before 3 p.m. Icom M510BB GW 21 Black Box VHF with white control mic and 3 control mic ports Technical specifications
Type: | Communication | VHF - Fixed mounting |
---|---|
Supplier: | Icom |
AIS: | Yes |
Integrated GPS: | Yes |
Color: | White |
Hailer: | Yes |
Intercom capability: | Yes |
NMEA 2000: | Yes |
Remote mic capable: | Yes |
Product brochure: | Download PDF |
For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.
- Icom M510BB Black Box VHF With HM195GW White
- Icom M510BB Black Box VHF With HM195GB Black
- Icom M510BB 21 Black Box VHF with black control microphone and 3 control microphone ports
- Icom M510 VHF with Wireless Smart Device Operation - Black
- Icom M510 VHF Bundle with CT-M500
- Icom M510 VHF set with CT-M500 f/NMEA 2000 wireless interface box
- Icom M510 PLUS VHF Marine Radio with AIS - Black