Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" Width 5/8" Shaft Diameter Marine Plumbing & Ventilation

Turbine kit - 8 blades - Neoprene - 2-9/16" diameter x 2" width, 5/8" shaft
Diameter

Features :

Material: Neoprene
Drive type: Spline drive
Number of blades: 8
Dimensions: Diameter: 2-9/16", Shaft Width: 2", Shaft Dia: 5/8"
Material Insert Size: Brass

Jabsco flexible impellers can be installed on most makes and models of engine cooling, bilge, transfer and general purpose pumps flexible bronze impeller.
Jabsco flexible impellers undergo rigorous quality processes to ensure increased reliability, efficiency and longevity. long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine function. When installed correctly, a wheel can last several years, but itIt is always advisable to adhere to a preventative rather than corrective maintenance schedule.

Replacing the wheels is easy. By removing the screws from the end cover it is possible to remove the turbine using either a Jabsco turbine removal tool or channel lock pliers to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After havingr replaced the gasket and end cover, the pump is ready for use.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present . Use an acrylic impeller for pumping bilge water and for...
PRODUCT ID: 50247
SKU: NVN-50247
CSKU: CWR-50247
REWRITE: 61358- jabsco-impeller-kit-8 -blade
MPN: 920-0001-P
UPC: 671880570794
ASIN: B000O8D6X6
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU: 6-9200001P
NAME: Jabsco Impeller Kit- 8 blades - Neoprene - 2-9/16" diameter x 2" width, shaft diameter 5/8"
NAME_EX: JABSCO NEOPRENE TURBINE KIT 8 blades 2 9/16 DIA X 2 W
br> PITTER: Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" Width, 5/8" Shaft Diameter
TYPE: Marine Plumbing & Ventilation | Wheels
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Apparel
Jabsco 920-0001-P Marine Replacement Impeller (neoprene, M silhouette, 2" depth, 7-spline drive, 5/8" shaft, 8 blades, 2 9/16" diameter, brass insert)
Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" diameter x 2" width, 5/8" shaft diameter
Clothing
Gtags:

Jabsco

Specifications G:

Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" Width, 5/8" Shaft Diameter Product Description Impeller Kit - 8 Blades - Neoprene - 2- 9/16" Dia x 2" W, 5/8" Shank
Diameter

Features:

Material : Neoprene
Type of drive: Spline drive
Number of blades: 8
Dimensions: Diameter: 2- 9/16", Shaft Width: 2", Shaft Diameter: 5/8"
Insert Material: Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engines, cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subject to processes. stringent quality standards to ensure reliable, efficient and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine operation Lo.When the installation is correct, a turbine can last several years, but it is always advisable to follow a prevention program rather than corrective maintenance.

Replacing turbines is easy. By removing the end cover screws, it is possible to remove the impeller using a Jabsco impeller removal tool or channel lock. pliers, to grip the wheel hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives protection.n additional to the wheel during initial priming. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California as causing cancer, birth defects or other reproductive harm. For more information,

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping bilge water and for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/ 16" Diameter x 2" Width, 5/8" Shaft Diameter Who is Jabsco? How to Describe Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" width, 5/8" shaft diameter?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe J.Absco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" Width, 5/8" Shaft Diameter? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present Use an acrylic impeller for pumping bilge water and for...

Save $17 with the purchase of the Jabsco turbine kit - 8 blades - Neoprene - 2. -9/16" diametertre x 2" width, 5/8" shaft diameterfor only $34 from NVN Marine! Same day dispatch before 3 p.m. Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" Diameter x 2" Width, 5/8" Shaft Diameter /8" Shaft Diameter Technical Specifications

Type:	Marine plumbing and ventilation \| Wheels
Supplier:	Jabsco
Weight:	0.45 lbs

Jabsco Impeller Kit - 8 Blades - Neoprene - 2-9/ 16" diameter x 2" width, 5/8" shaft diameter User ReviewsJabsco Impeller Kit - 8 Blades - Neoprene - 2-9/16" diameter x 2" width, 5/8" shaft diameter 5/8" Shipping & Returns

Shipping Weight:	0.45 lbs
Box sizes:	3.00 (h) x 5.00 (w) x 8.00 (w)
Cubic feet:	120.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes