Jabsco Impeller Kit 8 Blades Nitrile 1-¼" Diameter Marine Plumbing & Ventilation

Turbine kit

Material:Nitrile
Drive type:Single flat drive
Number of blades:8
Dimensions:
Diameter:1-1/4"
Shaft width: 5 /16"
Shaft Diameter:15/32"
Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subject to rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all impellers at least once a year, or sooner, depending on engine function. installation is correct, a turbine can last several years, but it is always advisable to respect a prevention schedule rather than carrying out preventive operations, but correction.ntenance.

Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco impeller removal tool, or channel lock pliers, to grip the wheel hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

WARNING: This product can expose you to chemicals, including LEAD, which is recognized by the State of California may cause cancer, birth defects or other reproductive harm. For more information,

8 Blade-1-n#188; "MFG Part Number: 14750-0003-P Manufacturing: Jabsco UPC: 671880575041
PRODUCT ID: 50248
SKU: NVN-50248
CSKU: CWR-50248
REWRITE: 61359-jabsco-impeller -kit-8-blade
MPN: 14750-0003-P
UPC: 671880575041
ASIN: B002SWF56M
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 771915
LSKU: 6-147500003P
NAME: Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter
NAME_EX: JABSCO NITRILE Impeller KIT 8 Blades 1 1/4 DIA X 15/32 W
PTITRE: Jabsco Impeller kit - 8 blades - Nitrile - 1-¼" diameter
TYPE: Plumbing and ventilationmarine | Impellers
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERCRAFT PARTS & ACCESSORIES
Sports
Jabsco Impeller Kit - 8 Blades - Nitrile - 1- ¼" Diameter
Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼, Diameter
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter Product Description Impeller Kit

Material:Nitrile
Drive type: Single flat drive
Number of blades:8
Dimensions:
Diameter:1-1/ 4"
Shaft Width:5/16"
Shaft Diameter:15/32"
Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of engine cooling, bilge, transfer pumps and general purpose flexible bronze impeller.
Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all impellers at least once a year, or earlier, depending on the function of the engine. When installed correctly, a wheel can last several years, but it is always advisable to follow a scheduleme of preventative rather than corrective maintenance.

Replacing the impellers is easy. By removing the screws from the end cover, it is possible to remove the impeller using either a tool Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and end cover, thepump is ready for use.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive problems. For more information,

8 Blade-1-n#188; "MFG Part Number: 14750-0003-P Manufactured: Jabsco UPC: 671880575041

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter Who is the Jabsco?
How to describe the Jabsco turbine kit - 8 blades - Nitrile - 1-¼" diameter?
Who is the Jabsco? Jabsco is one of the world's leading manufacturers of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems Anywhere a pump is needed on board a boat. pleasure boat or a small boat of twork, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide a superior product. How to Describe Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter? 8 Blades-1-n#188; "MFG Part Number: 14750-0003-P Manufacturing: Jabsco UPC : 671880575041

Save $16 on the purchase of the Jabsco Impeller Kit - 8 blades - Nitrile - 1-¼" diameter for more only $31 from NVN Marine! Same day shipping before 3pm Jabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter Videos Jabsco Impeller Kit - 8 Blades - Nitrile - 1-. ¼" Diameter Technical Specifications

Type:	Marine Plumbing & Ventilation \| Impellers
Supplier:	Jabsco
Weight:	0.1 lb

Jabsco turbine kit - 8 blades - Nitrile - 1-¼" de diameter User ReviewsJabsco Impeller Kit - 8 Blades - Nitrile - 1-¼" Diameter Shipping & Returns

Shipping Weight:	0.1 lb
Box sizes:	1.00 (h) x 4.00 (w) x 6.00 (l)
Cubic feet:	24.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please visit our Shipping Policy page and you can find our return and refund policy here.