Lenco 9" x 12" Electro-Polished Standard Trim Tab Kit Boat Outfitting

9" x 12" Standard Electro-Polished Decorative Tab Kit
12V

Fast-response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch. Blades are constructed of 12 gauge electro-polished 304 stainless steel with a 5/8" flared trailing edge and 1/8" diameter stainless steel hinge pin.

Kits include:

(2) Electro-polished 12 gauge stainless steel blades
(2) 15054-001 actuator with wires 6' and Deutsch Connectors
(2) 30133-103 20' Actuator Extension Wire Harnesses
(2) 15085-001 Brackets Upper Mounting Brackets with Gasket
(2) Lower Mounting Brackets 50014-001
Lenco Installation/Owner's Manual
Stainless steel mounting hardware

Specifications:

Boat length :16' - 25'
L" x W":9" x 12"
Hinge height:2 "
Minimum transom height:14"

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

" All the same features of the Standard Mount series with the addition. electro-polished blades. Electro-Polish adds a mirror finish and ultimate corrosion protection. Boat lengths 16 (4.9 m) to 30 (9.1 m). All the same features of the Standard Mount series with the addition of electro-polished blades. Electro-Polish adds a mirror finish and ultimate corrosion protection.Boat lengths 16 (4.9 m) to 30 (9.1 m). Kit includes: (2) 12 gauge stainless steel electro-polished blades, (2) 15054-001 actuators with 6' (1.8m) cables and Deutsch connectors, (2) extension wire harnesses Actuator 30133-103 - 20 (20 ft) Length, (2) 15085-001 Upper Mounting Brackets with Throat Gland Gasket, (2) 50014-001 Lower Mounting Brackets, Lenco Owner's/Installation Manual and stainless steel mounting hardware. Switch kits sold separately. trim
MPN: 15113-101
UPC: 874847006774
ASIN: B00AJVKSMA
WSKU: LEN15113101
SSKU:
KSKU: LEN15113101
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 12" Electro-Polished Standard Trim Tabs Kit
EX_NAME: LENCO 9" x 12" ELECTRO-POLISHED Standard Trim Tabs KIT
PTITER: Lenco 9 " x 12" Electro- Polished Standard Trim Tab Kit
TYPE: Boat Equipment | Garnish tabsture
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco Marine Inc 15113-101 Tab Kit 9" x 12" Standard Trim Cap="100%"> Lenco
GSpecs:

Lenco 9" x 12" Electro-Polished Standard Trim Tab Kit Product Description 9" x 12" Electro-Polished Standard Trim Tab Kit
12 Volt

Fast-response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch. Blades are constructed of 12 gauge electro-polished 304 stainless steel with a 5/8" flared trailing edge and 1/8" diameter stainless steel hinge pin.

Kits include:

(2) Electro-polished 12 gauge stainless steel blades
(2) 15054-001 actuator with wires 6' and Deutsch Connectors
(2) 30133-103 20' Actuator Extension Wire Harnesses
(2) 15085-001 Brackets Upper Mounting Brackets with Gasket
(2) Lower Mounting Brackets 50014-001
Lenco Installation/Owner's Manual
Stainless steel mounting hardwareable

Specifications:

Boat length:16' - 25'
L" x W":9" x 12"
Hei hinge height:2"
Minimum transom height:14"

This product can expose you to chemicals, including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,

"All the same features of the standard mount series with the addition of electro-polished blades. The electro -Polishing adds a mirror finish and the ultimate in corrosion protection. Boat lengths from 16 (15 ft.) to 30 (9.1 ft.) All the same features of the Standard Mount series with the addition of. Electro-polished blades add a mirror finish and ultimate protection againstbe corrosion. 16 (4.9 m) to 30 (9.1 m). Kit includes: (2) 12 gauge stainless steel electro-polished blades, (2) 15054-001 actuators with 6' (1.8m) cables and Deutsch connectors, (2) Extension wire harnesses 30133-103 Actuator - 20 (20 ft.) Length, (2) 15085-001 Top Mount Brackets with Gasket, (2) 50014-001 Lower Mounting Brackets, Lenco Owner's/Installation Manual and Hardware stainless steel mounting bracket. Switch kits sold separately."

Lenco Electro-Polished Standard Trim Kit 9" x 12" Related Products Lenco Top Mount Bracket with Gland Gasket (2008 to Present)

br />Lenco Compact Top Mount Bracket - 2 Screws 1 Thread
Lenco Standard Top Mount Bracket - 3 Screws 1 Wire
Lenco Standard Bottom Mount Bracket - 3 Bolts
Tecnoseal Rudder Anode R1 - Zinc - 1-7/8" diameter
br />Tecnoseal R2 rudder anode - Zinc - 2-13/16"diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal rudder anode R2AL - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" diameter

Frequently Asked Questions (FAQ) about Lenco 9" x 12" Electro-Polished Standard Trim Kit Who is Lenco Marine?
How to describe the Lenco 9" x Electro-Polished Standard Trim Kit 12"?
What is the construction of the product?
Who is the Lenco Marin? Trim tabs make the most important difference in how your boat will sail and operate. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's ball screw design is more reliable, twice as reliablepowerful and has an instant response that makes them very user-friendly. How to describe the Lenco 9" x 12" Electro-Polished Standard Trim Tab Kit? "All the same features of the Standard Mount Series with the addition of electro-polished blades. Electro-polishing adds a mirror finish and ultimate corrosion protection. Boat lengths 16 (4.9 m) to 30 ( 30 ft.) All the same features of the Standard Mount series with the addition of electro-polished blades. Adds a mirror finish and ultimate corrosion protection Boat lengths 16 (4.9 m) to 30 (. 30 ft.) Kit includes: (2) 12 gauge stainless steel electro-polished blades, (2) 15054-001 actuators with 6' (1.8 m) cables and Deutsch connectors, (2) harnesses of 30133-103 Actuator Extension Cables - 20 (20 ft) Length, (2) 15085-001 Upper Mounting Brackets with Gasket, (2) 50014-001 Lower Mounting Brackets, Manual installationn/owner Lenco and stainless steel mounting hardware. Switch kits sold separately."

The standard electro-polished 9" x 12" 12V fin kit is the perfect solution for a boat with a small to mid-sized engine.
It features fast-response electric actuators for precise control and fully submersible blades.
Blades are made from corrosion-resistant, electro-polished 12 gauge 304 stainless steel and durable.

For more precise control, these tabs are equipped with a fast-response electric actuator.
These tabs are fully submersible, you so you can use them in any environment.
All connections are made using Deutsch connectors, so there is no need for soldering.

What is the construction of the product? Stainless Steel

The standard 9" x 12" 12V electro-polished fin kit is the one.perfect solution for a boat with a small to medium sized engine.
It features a fast response electrical system. actuators for precise control and fully submersible blades.
Blades are made of electro-polished 12 gauge 304 stainless steel, corrosion resistant and durable.
For precision maximum. control, these tabs are equipped with a fast-response electric actuator.
These tabs are fully submersible, so you can use them in any environment.
All connections are made using Deutsch connectors, so there is no need for soldering.
The all new Lenco 9" X 12" Electro Polished Standard Mount Trim Tab Kit is a A must-have for your boat.
Electro-polished blades add ultimate corrosion protection and a mirror finish.
They will never corrode andwill never rust, and they are even less likely to be scratched.
li>
Electropolished blades last longer and look better
Electropolishing adds a finish mirror and ultimate corrosion protection

Save $384 when you purchase the Electro-Polished Standard Trim Tab Kit Lenco 9" x 12"for only $517 at NVN Marine! Same day dispatch before 3 p.m. Lenco 9" x 12" Electro-Polished Standard Trim Kit Technical Specifications

Type:	Boat Equipment \| Compensating Tabs
Seller:	Lenco Marine
Weight:	16.85 lbs
Construction:	Stainless steel

Lenco 9" x 12" Electro-Polished Standard Trim Tab Kit User ReviewsTrim Tab Kiture standard Lenco 9" x 12" electropolished Shipping & Returns

Shipping Weight:	16.85 lbs
Box sizes:	5.00 (h) x 13.00 (w) x 14.00 (w)
Cubic feet:	910.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return Policy. and refund policy here.