Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Boat Outfitting

Standard Performance Series Tabs

Standard actuator with 5/16" stainless steel through-bolts. 1" raised edges with 2" inside taper All 304 12 gauge stainless steel construction with electro-polished blades

We make the best boats better!

Running wide open in rough seas doesn't matter. is not for the faint of heart Aggressive boating requires durable boat accessories. Lenco's Standard Performance trim tab series is designed to handle anything you or Mother Nature could throw at them. go hard and fast. Why should your trim tab system be any different

All stainless steel construction (no dissimilar metals), electro-polished blades for long-lasting good looks?
The speed of the actuator is precise and controllable, so there are no surprisess at maximum speeds

Actuators

Instant response
Fully submersible, maintenance free and sealed for life
High-impact nylon housing, 50% fiberglass filled and ultraviolet resistant

Kits of standard solid state tactile switches with gap function
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keyboard and co-enclosuresolid state driver with waterproof connectors
Quick and simple installation
Includes 36 inch power pigtail for driver box
Hole cutout size 2", total size 2.75" x 2.75'

Each kit contains:

Standard touch switch kit
2 actuators with 6' cable and Deutsch plugs
2 Trim tab plans in 12 gauge polished stainless steel
2 x 20' actuator extension wire harnesses
2 top mounting brackets with gland seal
2 bottom mounting brackets
All stainless steel mounting hardware needed

This product can expose you to chemicals, including di( 2-ethylhexyl) (dehp), known bythe State of California to cause cancer, birth defects or other reproductive harm. For more information,

Standard Performance Series lug actuator, with 5/16" stainless steel through-bolts. Top flange 1", 2" interior cone, all 12 gauge 304 stainless steel construction, electropolished... standard performance version
MPN: RT9X9
UPC: 005827671419
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 9" Standard Performance Trim Tab Kit with Standard 12 Tactile Switch Kit V
NAME_EX: LENCO 9" TYPE: Boat fittings | Trim Tabs
SELLER: Lenco Marine
Category Google: VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 9" x 9" Standard Performance Trim Tab Kit with standard 12V touch switch kit - RT9X9

Gtags:

Lenco

GSpecs:

Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Product Description Standard Performance Series Tabs

Standard Actuator with 5/16" stainless steel passage bolts. 1" raised edges with 2" cone inside. All 12 gauge 304 stainless steel construction with electro-polished blades

We make the best boats better!

Racing the open ocean in rough seas is not for the faint of heart Aggressive boating requires durable boat accessories The Standard Performance trim tab series. from Lenco is designed to handle anything you or Mother Nature could throw at them your boat is designed to go fast and hard Why should your trim tab system be any different?

Actuator speed is precise and controllable, so there are no surprises at maximum speeds

Actuators

Instant response
Fully submersible, maintenance free and sealed for life
Shock resistant, 50% filled fiberglass, nylon housing resistant to ultraviolet

Standard solid state tactile switch kits with gap function
#15069-001 (124SSR)
For 12 volts single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug& Play
Low-profile design
Sealed, self-contained keyboard and solid-state control box with waterproof connectors
Quick and easy installation
Includes 36" power pigtail for control box
2" hole cutout size, total size 2.75" x 2.75'

Each kit contains:

Standard Tactile Switch Kit
2 actuators with 6' cable and Deutsch plugs
2 12 gauge polished stainless steel trim tab plans
2 x 20' actuator extension wire harnesses
2 x upper mounting brackets with gland seal
2 x lower mounting brackets
2 br>
All necessary stainless steel mounting hardware

This product can expose you to chemicals, including di (2-ethylhexyl)phthalate (dehp), connuated by the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Standard Performance Series lug actuator, with 5/16" stainless steel through-bolts. Top flange 1", 2" inside cone, All 12 gauge 304 stainless steel construction, electropolished...

Lenco 9" x 9" Standard Performance Trim Tab Kit with Trim Kit 12V standard touch switchRelated ProductsLencoet Top Mount Bracket with Gland Gasket (2008-present)
Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Lenco Standard Top Mount Bracket - 3 Screws 1 thread
Lenco Standard Lower Mounting Bracket - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/ 16" diameter
AnodeTecnoseal R3 rudder - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/ 16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter

Frequently Asked Questions (FAQ) about Trim Tab Kit Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tact Switch Kit Who is Lenco Marine? How to Describe the Lenco 9" x 9" Standard Performance Trim Tab Kit with Switch Kit standard 12 V touchscreen?
Who is Lenco Marine? Trim tabs make the most important difference in how your boat trims and performs. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. The design of the ball screwfrom Lenco are more reliable, twice as powerful and offer instant response which makes them very user-friendly. How to describe the Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit? Standard Performance Series lug actuator, with 5/16" stainless steel through-bolts. 1" top flange, 2" inside cone. All 12 gauge 304 stainless steel construction, electropolished...

Save $505 on purchase of Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit for only $757 at NVN Marine Same day shipping before 3pm Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Technical Specifications

Type:	Boat outfitter \| Compensating tabs
Soldr:	Lenco Marine
Weight:	19.4 lbs
Product brochure:	Download PDF

Lenco 9" x 9" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit /12V Standard Tactile Switch Kit Shipping & Returns

Weight Shipping Weight:	19.4 lbs
Box Sizes:	3.00 (h) x 5.00 (w) x 9.00 (w)
Cubic Feet:	135.0
Returnable:	Yes
P65:	Yes

For detailed shipping generally, please see our policy shipping and you can find our return and refund policy here.