Magnum ME2512 2500W 12V Inverter with 120A PFC Charger Electrical
Magnum Energy ME2512U Attributes- Output voltage: 120 V AC
- Input voltage: 9-16 V DC
- Power of continuous output (W): 2,500 watts
- Maximum output power (W): 5,000 watts
- Ampere rating: 120 amps
- Efficiency: 91 for hundred
- Number of AC outlets: 1
- Length (IN): 8 inches
- Width (IN): 12.65 inches
- Height (IN): 13-3/ 4 inches
- Remote on/off capable: Yes
- With USB port: No
- With voltmeter/ power meter: Yes
- With Short circuit: Yes
- With battery reverse protection: Yes
- With thermal protection: Yes
- With Battery Cables: Yes
- With -In Charger: Yes
- With Fuse: No
- Designed for exceptional performance
- Provides high performance Efficient power at full load
- Limited warranty2 year term
Reliable mobile power from Magnum Energy
ME Series Inverter/Charger from Magnum Energy is a next generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy to use and, above all, cost effective.
Safe and Reliable: The ME Series is ETL listed to the strict requirements of UL/cUL 458 and CSA C22.2 #107.1-. 01, ensuring that the inverter is safe and reliable.
Easy to install: Install the ME series in four simple steps: simply connect the inverter output to your circuits distribution or electrical panel, connect your shore power (AC) cable to the inverter's easy-access terminal block, connect the batteries and turn on the power.
Features
The ME Series Inverter/Charger is packed with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. He usesuses less power from a generator than a standard charger - using only 15 amps per 100 amps compared to 23 amps used by standard chargers.
Choice: The ME series is available in three power models , allowing you to choose the model that suits you.
Versatile mounting: mount the ME series on a shelf, partition or even upside down.
Lightweight: The base and The lightweight aluminum cover also provides noise reduction and corrosion resistance.
Multiple ports: The ME series provides multiple ports, including an RS485 communication port for network expansion and a remote.
Accessible design: Extra large AC access cover with screw terminal block and 360° DC connection terminals with covers make this inverter more accessible when needed.
Convenient Switches: The ME series comes with an inverter-mounted on/off switch with an LED indicatoreasy to read.
Extended Transfer Relay: 60A transfer service is available on all models.
Buy with ease: The ME Series is backed by a warranty limited to three years (36 months).
Accessories and options*
Remote control: for convenient fingertip operation, including the new single button? programming.
AGS Module: Automatically starts and stops your generator based on temperature or battery voltage.
| Inverter specifications | ME2012 | ME2512 | ME3112 |
| Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
| Rated AC output voltage | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and accuracy | 60 hz 0.1 Hz | 60 hz 0.1 Hz | 60 Hz 0 .1 Hz |
| 1 mDry surge current (AC amps) | 60 | 100 | 120 |
| Current surge rating of 100 ms (AC amps) | 37 | 45 | 50 |
| 5 seconds surge (real watts) | 3700 | 5000 | 6000 |
| Surge power of 30 seconds (real watts) | 3450 | 4,500 | 4,800 |
| 5 Minute Surge Power (Actual Watts) | 3100 | 3500 | 3950 |
| 30 Minute Surge Power (Actual Watts) | 2400 | 2900 | 3500 |
| Continuous power at 45°C | 2000 VA | 2500 VA | 3100 VA |
| Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC |
| Inverter efficiency (peak) | 95% | 91% | 90% |
| Transfer time | 16 ms | 16 ms | 16 ms |
| Search mode (typical) | 5 watts | 5 watts | 5 watts |
| No load (120 VAC output) Typical | 20 watts | 23 watts | 25 watts |
| Waveform | Modified sine wave | ||
| Charger specifications | |||
| Continuous output at 45°C | 100 ADC | 120 ADC | 160 ADC |
| Charger efficiency | 85% | 85% | 85% |
| Power factor | > .95 | > .95 | > .95 |
| Current input to output rating (AC amps) | 15 | 18 | 21 |
| General features and capabilities | |||
| Transfer relay capacity | 2 branches at 30 A for one 120V/30A or 240V/60A service | ||
| Five-stage charging capability | Bulk, Absorption, Float, Equalization and Battery Saver™ | ||
| Cooling Temperature Compensation battery | Yes, standard 15 foot battery temperature sensor | ||
| Internal cooling | Speed variatorvariable from 0 to 120 cfm using two 92mm brushless DC fans | ||
| Overcorrection protection | Yes, with two stacked circuits | ||
| Conformal coating on PCBs for protection against corrosion | Yes | ||
| Overheating protection | Yes, on transformer, MOSFETS, and battery | ||
| Stainless steel fasteners for corrosion protection | Yes | ||
| Dual AC bRanch Class Outlet Circuit Breakers | On ME2012-20B only - 20 amp AC circuit breakers | ||
| Listings | ETL listed to UL/cUL 458, CSA C22 .2 #107.1-01 | ||
| Warranty | 3 years | ||
| Environmental specifications | |||
| Operating temperature | -20° C to +60° C (-4° F to 140° F) | ||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | ||
| Operating humidity | 0 to 95% RH non-condensing | ||
| Physical specifications | |||
| Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | ||
| Mounting | Shelf (top or bottom up) or partition (vents upwards) | ||
| Maximum operating altitude | 15,000 feet | ||
| Weight | 37 lbs | 41 lb | 46 lb |
Introduce the ME Series InverterCharger . A next-generation inverter designed for use in rugged, durable recreational vehicles. The ME series is powerful, easy to use and, above all, cost effective. The safe and reliable ME series is ETL certified and meets the strict requirements of ULcUL 458 to ensure inverter safety and reliability. The rated temperature reaches 45°C. -for connecting terminal blocks, single input, single output, double input, double output and single input and double ME series installation. Replace most brands of inverter chargers on the market. Even at low AC voltage, sine wave chargersdale can charge the battery efficiently, and the upgraded sine wave inverter can save costs. Additionally, the included battery temperature sensor can be used in conjunction with the charger to achieve the best battery charge.
PRODUCT ID: 1001061
SKU: NVN-1001061
CSKU: CWR-1001061
REWRITE: 1012172-magnum-me2512-2500w-inverter-12v-w-120a-pfc
MPN: ME2512-U
UPC: 892608001073
ASIN: B0056GXGT0
WSKU: MGNME2512
SSKU: MAGN -ME2512
KSKU: M6BME2512
GSKU:
MSKU:
LSKU:
NAME: Magnum ME2512 2500W 12v Inverter with PFC 120A Charger
NAME_EX:
PTITLE: Magnum ME2512 2500W 12V Inverter with 120A PFC Charger
TYPE: Electric | Inverters
SELLER: Magnum
Sports
Magnum ME2512 2500W 12V W-120A Inverter PFC Charger
Sports
br>Gtags:
| Magnum-Dimensions |
GSpecs:
Magnum ME2512 2500W 12V Inverter with 120A PFC Charger Product Description Magnum Energy ME2512U Attributes
- Output Voltage:120 Volts AC
- Input Voltage: 9-16 V DC
- Continuous output power (W): 2,500 watts
- Maximum output power (W): 5 000 watts
- Rated current: 120 A
- Efficiency: 91 percent
- Number of AC outlets: 1
- Length (IN ): 8 inches
- Width (IN): 12.65 inches
- Height (IN): 13-3/4 inches
- Remote On/Off Capable: Yes
- With USB Port: No
- With Voltmeter/Wattmeter: Yes
- With short circuit: Yes
- With reverse battery protection: Yes
- With thermal protection: Yes
- With battery cables :Yes
- With integrated charger: Yes
- With fuse: No
- Designed for exceptional performance
- Provide high-efficiency power under full-load conditions
- 2-year limited warranty
Reliable mobile power from Magnum Energy
The Magnum Energy ME Series Inverter/Charger is a next-generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy to use and, above all, cost-effective.
Safe and reliable: The ME Series is ETL approved to the strict requirements of UL/cUL 458 and CSA C22.2 #107.1-. 01, ensuring that the inverter is safe and reliable.
Easy to install: Install the ME series in simple steps: simply connect the inverter output to your circuits distribution box or your electrical panel, connect your shore power (AC) cable to the inverter's easy-access terminal block, connect the batteries and turn on the power.
/p>
Features
The ME Series Inverter/Charger is packed with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less power from a generator than a standard charger - using only 15 amps per 100 amps compared to 23 amps used by standard chargers.
Choice: The ME Series is available in three models of power, allowing you to choose the model that suits you.
Versatile mounting: mount the ME series on a shelf, ae bulkhead or even upside down.
Lightweight: The lightweight aluminum base and cover also provide noise reduction and corrosion resistance.
Multiple Ports: The ME Series provides multiple ports, including an RS485 communication port for network operation and a remote port.
Accessible design: the extra large AC access cover with screw terminal block and the DC connection terminals to 360° with covers make this inverter more accessible when needed.
Convenient Switches: The ME series comes with an on/off switch mounted on the inverter with an easy-to-read LED indicator.
Extended Transfer Relay: 60A transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and options*
Remote control: For convenient use at your fingertips, including the new bosingle uton? programming.
AGS Module: Automatically starts and stops your generator based on temperature or battery voltage.
b>| Inverter specifications | ME2012 | ME2512 | ME3112 |
| Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
| Voltage rated AC output | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and precision | 60 Hz / 0.1 Hz | 60 Hz 0.1 Hz | 60 Hz 0.1 Hz |
| 1 ms surge current (AC amps) | 60 | 100 | 120 |
| Current 100ms surge (AC amps) | 37 | 45 | 50 |
| 5-second surge power (actual watts) | 3 700 | 5,000 | 6,000 |
| 30 second surge power (actual watts) | 3450 | 4500 | 4800 |
| 5 minute surge power (actual watts) | 3,100 | 3,500 | 3950 |
| 30 minute surge power (actual watts) | 2400 | 2900 | 3500 |
| Power continuous at 45°C | 2000 VA | 2500 VA | 3 100 VA |
| Maximum continuous input current | 266 ADC | ADC 333 | ADC 413 |
| Effectiveness of inverter (peak) | 95% | 91% | 90% |
| Transfer time | 16 ms | 16 ms | 16 ms |
| Search mode (typical ) | 5 watts | 5 watts | 5 watts |
| No load (120 VAC output) Typical | 20 watts | 23 watts | 25 watts |
| Waveform | Modified sine wave | ||
| Charger specifications | |||
| Continuous output at 45°C | 100 ADC | 120 ADC | 160 ADC |
| Charger efficiency | 85% | 85% | 85% |
| Power factor | > .95 | > .95 | > 0.95 |
| Rated input current at output (AC amps) | 15 | 18 | 21 |
| General features and capabilities | |||
| Capacity transfer relay | 2 branches at 30 A for 120 V/30 A or 240 V/60 A service | ||
| Five-stage charging capacity | Bulk, Absorb, Float, Equalize and Battery Saver™ | ||
| Battery temperature compensation | Yes, 15ft battery standard temperature sensor | ||
| Internal Cooling | 0 to 120 cfm variable speed drive using Dual 9 Brushless DC fans 2 mm | ||
| Overcorrection protection | Yes, with two stacked circuits | ||
| Conformal coating on PCBs for corrosion protection | Yes | ||
| Overheat protection | Yes, on transformer, MOSFETS and battery | ||
| Stainless steel fasteners for corrosion protection | Yes | ||
| AC Double Branch Outlet Circuit Breakers | On ME2012-20B only - 20 amp AC circuit breakers | ||
| Lists | ETL listed to UL/cUL 458, CSA C22.2 #107.1-01 | ||
| Warranty | 3 years | ||
| Environmental specifications | |||
| Operating temperature | -20° C to +60° C (-4° F to 140° F) | ||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | ||
| Operating humidity | 0 to 95% Non-condensing HR | ||
| Physical specifications | |||
| Dimensions (h x w x d) | 13.75" x 12.65" x 8 .0" (34.9 cm x 32.1 cm x 20.3 cm) | ||
| Mounting | Shelf (top or bottom up) or partition (vents up) | ||
| Maximum operating altitude | 15,000 feet | ||
| Weight | 37 lb | 41 lb | 46 lb |
Introduce the ME Series InverterCharger. An inverternext generation designed for use in rugged and durable recreational vehicles. The ME series is powerful, easy to use and, above all, cost effective. The safe and reliable ME series is ETL certified and meets the strict requirements of ULcUL 458 to ensure inverter safety and reliability. The rated temperature reaches 45°C. Easy to install and use, easy to connect terminal blocks, single input, double input, double output and single input and double output installation ME series. Replace most brands of inverter chargers on the market. Even at low AC voltage, sine wave chargers can charge the battery efficiently, and the improved sine wave inverter can reduce costs. Additionally, the included battery temperature sensor can be used in conjunction with the charger to get the best battery charge.
Frequently asked questions (FAQ) about the Mag inverternum ME2512 2500 W 12 V W/charger PFC 120 A Who is the Magnum?
How to describe the Magnum ME2512 2500 W 12 V inverter W/charger PFC 120 A?
Who is the Magnum? Magnum Energy is a leading North American manufacturer of inverter/battery chargers, inverter accessories, enclosures, circuit breakers, fuse block assemblies, mini panels, conduit boxes, expansion boxes and other system products. - for mobile applications including utilities, RVs and marines; renewable energy applications and the export market. Manufactured in Everett, Washington, and St. Paul, Minnesota, they boast more than 150 years of combined inverter design and manufacturing experience. Magnum Energy uses advanced techniques to build some of the most reliable, advanced and durable systems. inverter and chargers for solutions off-grid solar power. How to describe the Magnum ME2512 2500W 12V Inverter W/120A PFC Charger? Introducing the ME InverterCharger Series. A next-generation inverter designed for use in rugged, durable recreational vehicles. The ME series is powerful, easy to use and, above all, cost effective. The safe and reliable ME series is ETL certified and meets the strict requirements of ULcUL 458 to ensure inverter safety and reliability. The rated temperature reaches 45°C. Easy to install and use, easy to connect terminal blocks, single input, double input, double output and single input and double output installation ME series. Replace most brands of inverter chargers on the market. Even at low AC voltage, sine wave chargers can charge the battery efficiently, and the improved sine wave inverter can reduce costs. Additionally, the included battery temperature sensor canbe used in conjunction with the charger to get the best battery charge.
Save $993 when you purchase the Magnum ME2512 2500W 12v Inverter with 120A PFC Charger for only $731 at NVN Marin! Free same day shipping before 3 p.m. Magnum ME2512 2500W 12V Inverter with 120A PFC Charger Technical Specifications
| Type: | Electric | Inverters |
|---|---|
| Supplier: | Magnum |
| Weight: | 46.0 lbs |
| Shipping Weight: | 46.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic feet: | 1.0 |
| Backrnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
| Truck Delivery: | Yes |
- Magnum ME2012 2000W 12V Inverter with 100A PFC Charger
- Magnum ME2012 2000W 12v inverter with 100A charger 2 blocks 20A
- Magnum ME-RC50L remote panel with 50' cable
- Magnum ME-RC50 remote panel with 50' cable
- Magnum ME-BMK Battery Monitor State of Charge with Shunt
- Magnum ME-ARC50 Advanced Remote Control with 50' Cable
- Automatic start of the Magnum ME-AGS-N generator
