Magnum MS2012L 2000W 12V Inverter with 100A PFC Charger Electrical
Sensata Technologies – a pure sine wave inverter designed specifically for the most demanding mobile, backup and off-grid applications.
Magnum Energy MS2012LU Attributes- Output Voltage: 120 Volts AC
- Input voltage: DC 12V
- Continuous output power (W): 2000 watts
- Maximum output power (W): 3300 watts
- Ampere Rating: 16.7 A
- Efficiency: 90 percent
- Number of AC outlets: 2
- Length (IN ): 13-3/4 inches
- Width (IN): 12.65 inches
- Height (IN): 8 inches
- On/off capable remote: Yes
- With USB port: No
- With voltmeter/wattmeter: no
- With short circuit: no
- With reverse battery protection: No
- With thermal protection: Yes
- With battery cables: No
- With integrated charger: Yes
- With fuse: No
- Pure Sine Wave: Power your TVs, stereos, plasma displays and other sensitive electronics without
- Pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5 percent
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and resistance to corrosion.
- Extended transfer relay: 60 A transfer service on all models
- Versatile mounting: mount the MS series on a shelf, bulkhead or even upside down .
- Easy to install
- 3 year limited warranty
- 64-0007 Rev F MS Series_Web_1 .pdf
- MS-series_datasheet_64-0200-RevO_web.pdf
- MS-series_datasheet_64-0200-RevO_web.pdf
The Magnum Energy MS Series Inverter/Charger? a pure sine wave inverter designed specifically for the most demanding mobile and off-grid applications. The MS series is powerful, easy to use and the best in class, cost effective.
Power Factor Corrected (PFC) Charger: Our PFC charger is integrated into all our inverter chargers. Does a generator use less energy than a standard charger? using 25-30% less AC power than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812 and MS4024 are ETL listed to strict UL requirements /ass. 458 for mobile use and the MS2012, MS2812 and MS4024 are ETL UL 1741 and CSA C22.2 #107.1-01 listed for renewable energy installations. All models also meet KKK-A-1822E standards for use in emergency vehicles.
Easy to install: Installthe MS series in four simple steps: Simply connect the inverter? output to your distribution circuits or electrical panel, connect your mains power cable to the inverter's easy-access terminal block, connect the batteries and turn on the power
Features:
Pure sine wave: Power your TVs, stereos, plasma displays and other sensitive electronics without worry. Pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choice: The MS series is available in 12 and 24 volt configurations, allowing you to choose the model that suits you.
Versatile mounting: Mount the MS series on a shelf, partition or even upside down.
Lightweight: The base and coverLightweight aluminum frame also provides noise reduction and corrosion resistance.
Multiple ports: The MS series provides multiple ports, including a RS485 communication for network expansion and remote port.
Accessible design: Extra large AC access cover with screw terminal block and terminals 360° DC connector with covers make this inverter more accessible when needed.
Convenient Switches: MS series comes with a switch on/off mounted on the inverter with an easy-to-read LED indicator.
Extended transfer relay: A service of 60 A transfer is available on all models.
Buy with ease: The MS Series is backed by three 1-year limited warranties (36 month)
Transfer time| Specifications | MS2000 | MS2012 | MS2812 | MS4024 |
| Input battery voltage range | 9 -17 VDC | 9 - 17 VDC | 9 - 17 VDC | 18 - 34 VDC |
| Rated AC output voltage | 120 VAC | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and precision | 60 Hz ± 0.04% | 60 Hz ± 0.04% | 60 Hz ± 0.04% | 60 Hz ± 0.04% |
| Triple Harmonic Distortion (THD) | <5% | <5% | <5% | <5% |
| 1 msec surge current (AC amps) | 50 | 50 | 70 | 120 |
| 100 ms surge current (AC amps) | 33 | 33 | 40 | 72 |
| 5-second surge power (actual watts) | 3300 | 3300 | 3900 | 5800 |
| Power 30-second surge surge (actual watts) | 3100 | 3100 | 3800 | 5400 |
| 5 minute power surge (actual watts) | 2800 | 2800 | 3200 | 4,900 |
| Power ofe 30 minute surge (actual watts) | 2200 | 2200 | 3000 | 4500 |
| Continuous output power at 25°C | 2000 VA | 2000 VA | 2800 VA | 4000 VA |
| Rated input battery current | 225 CAN | 225 CAN | 267 CAN | 204 CAN |
| Inverter efficiency | 89% | 89% | 88% | 87% |
| 16 ms | 16 ms | 16 ms | 16 ms | |
| Search mode (typical) | 5 watts | 7 watts | 7 watts | 7 watts |
| no load (120 VAc output, typical) | 25 watts | 25 watts | 30 watts | 25 watts |
| Waveform | Pure sine wave | Pure sine wave | Pure sine wave | Pure sine wave |
| Charger specifications | ||||
| Continuous output at 25°C | 100 ADC | 100 ADC | 125 ADC | 105 ADC |
| Charger Efficiency | 85% | 85% | 85% | 85% |
| Power factor | >.95 | >.95 | >. 95 | >.95 |
| Input Current at Rated Output (AC Amps) | 15 | 15 | 18 | 29 |
| General features and capabilities | ||||
| Transfer relay capacity | MS2000: 30A single input MS2012, MS2812, MS4024: 2 legs at 30A for 120V service /30A or 240V/60A | |||
| Five-stage charging capacity | Bulk, Absorb, Float, Equalize (requires remote control) and Battery Saver™ | |||
| BaBattery temperature compensation | Yes, standard 15ft battery temperature sensor | |||
| Remote control available (optional) | Yes, MM-RC or ME-RC | |||
| Internal cooling | 0 to 120 cfm variable speed drive using two 92mm brushless DC fans | |||
| Overcurrent protection | Yes, with superimposed circuits | |||
| Overheat protection | yes on transformer, MOSFETS and battery | |||
| Compliant coating on PCBs for corrosion protection | Yes | |||
| Powder-coated chassis and top for corrosion protection | Yes | |||
| Stainless steel fasteners for corrosion protection | Yes | |||
| AC Double Branch Outlet Circuit Breakers | 20A on MS2000-20B | |||
| Listings | ETL listed according to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, conforms to KKK-A-1822E | |||
| Warranty | 3 years | |||
| Environmental specifications | ||||
| Operating Temperatures | -20° C to +60° C (-4° F to 140° F) | |||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | |||
| Operating humidity | 0 to 95% RH non-condensing | |||
| Physical specifications | ||||
| Dimensionsons (l x w x h) | 1:75 p.m.? x12:65 p.m.? x8.0? (34.9 cm x 32.1 cm x 20.3 cm) | |||
| Mounting | Shelf (top or bottom to top) or partition (vents up) | |||
| Weight | 40 lbs | 42 lbs | 55 lbs | 55 lbs |
Features Even at low AC voltage, the sine wave charger can charge the battery efficiently and the upgraded sine wave inverter can save costs. The battery temperature sensor can be used in conjunction with the charger to achieve the best charging effect. The MS series offers three power models as well as 12 volt and 24 volt configurations. Flash programming makes memory upgrades easy. Multifunctional installation: This model can be installed on shelveses, partitions or even upside down. Lightweight base and cover can reduce noise and resist corrosion. MS series provides multiple ports including RS485 communication port for network expansion, remote port accessible design and convenient 50A switch transmission service are applicable to all models. -magnum-ms2012l-2000w-inverter-12v-w-100a-pfc
MPN: MS2012-L-U
UPC: 892608001097
ASIN: B002MW6PHG
WSKU: MGNMS2012LU
SSKU: MAGN-MS2012 -L-U
KSKU: M6BMS2012LU
GSKU:
MSKU:
LSKU:
NAME: Magnum MS2012L 2000W 12v Inverter with 100A PFC Charger
NAME_EX:
PTITLE : Magnum MS2012L 2000 W 12 V inverter with 100 A PFC charger
TYPE: Electric | Inverters
SELLER: Magnum
Magnum Inverter Charger, 2000W 12V 100A True-Sine MS2012
Category Amazon:
Gtags:
| Magnum-Dimensions |
GSpecs:
Magnum MS2012L 2000W 12V Inverter with 100A PFC Charger Product Description
Sensata Technologies – a pure sine wave inverter designed specifically for the most demanding mobile, backup and off-grid applications.
Magnum Energy MS2012LU Attributes- Output Voltage: 120V AC
- Input Voltage : 12 V DC
- Continuous output power (W): 2000 watts
- Maximum output power (W): 3,300 watts
- Rated amps: 16 .7 amps
- Efficiency: 90 percent
- Number of AC outlets: 2
- Length (IN): 13-3/4 inches
- Width (IN): 12.65 Inches
- Height (IN): 8 inches
- On/off capableRemote: Yes
- With USB port: No
- With voltmeter/wattmeter: No
- With short circuit: No
- With reverse battery protection: No
- With thermal protection: No
- With thermal protection Protection: Yes
- With battery cables: No
- With integrated charger: Yes
- With fuse: No
- Pure Sine Wave: Power your TVs, stereos, plasma displays and other sensitive electronics without worry
- Pure sine wave inverter and power factor corrected charger Clean, reliable inverter power with low harmonic distortiontotal e (THD) less than 5%
- Lightweight: Lightweight aluminum base and cover also provide noise reduction and corrosion resistance
- Extended transfer relay: 60 A transfer service on all models
- Versatile mounting: Mount the MS Series on a shelf, bulkhead or even upside down
- Easy to install
- 3 Year Limited Warranty
- 64-0007 Rev F MS Series_Web_1.pdf
- MS-series_datasheet_64-0200-RevO_web.pdf
- MS-series_datasheet_64-0200-RevO_web.pdf
The inverter/ Magnum Energy MS series charger? a pure sine wave inverter designed specifically for the most demanding mobile and off-grid applications. The MS Series is powerful, easy to use and, above all, cost effective.
Power Factor Corrected (PFC) Charger: Our Chargingur PFC is integrated into all our inverter chargers. Does a generator use less energy than a standard charger? using 25-30% less AC power than standard chargers.
Safe and reliable: The MS2000, MS2012, MS2812 and MS4024 are ETL listed to strict UL requirements /ass. 458 for mobile use and the MS2012, MS2812 and MS4024 are ETL listed to UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for use in emergency vehicles.
Easy to install: Install the MS Series in four simple steps: just connect the inverter? output to your distribution circuits or electrical panel, connect your mains power cable to the inverter's easy-access terminal block, connect the batteries and turn on the power
Features:
Sin wavePure Usoidal: Power your TVs, stereos, plasma displays and other sensitive electronics worry-free. Pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choice: The MS series is available in 12 and 24 volt configurations, allowing you to choose the model that suits you.
Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
Lightweight: Lightweight aluminum base and lid provide also noise reduction. and corrosion resistance.
Multiple ports: MS series provides multiple ports, including an RS485 communication port for network expansion and a remote.
Accessible design: The very large cover of aAC access with screw terminal block and 360° DC connection terminals with covers make this inverter more accessible when needed.
Convenient switches: The MS series comes with an on/off switch mounted on the inverter with an easy-to-read LED indicator.
Transfer relay extended: 60A transfer service is available on all models.
Buy with ease: The MS series benefits from an three year (36 month) limited warranty
1 ms surge current ( AC amps)td>| Specification | MS2000 | MS2012 | MS2812 | MS4024 |
| Input battery voltage range | 9 -17 VDC | 9 - 17 VDC | 9 - 17 VDC | 18 - 34 VDC |
| Rated AC output voltage | 120 VAC | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and accuracy | 60 Hz ± 0.04% | 60 Hz ± 0. 04% | 60 Hz ± 0.04% | 60 Hz ± 0.04% |
| Triple Harmonic Distortion (THD) | <5% | <5% | <5% | <5% |
| 50 | 50 | 70 | 120 | |
| 100 ms surge current (AC amps) | 33 | 33 | 40 | 72 |
| 5-second surge power (actual watts) | 3,300 | 3,300 | 3900 | 5800 |
| Surge power of 30 seconds (real watts) | 3100 | 3100 | 3800 | 5,400 |
| 5 Minute Surge Power (Actual Watts) | 2,800 | 2800 | 3200 | 4900 |
| 30 Minute Surge Power (Actual Watts) | 2200 | 2200 | 3000 | 4500 |
| Continuous output power at 25° C | 2000 VA | 2000 VA | 2800 VA | 4000 VA |
| Input Battery Rated Current | 225 ADC | 225 ADC | 267 ADC | 204 ADC |
| Inverter efficiency | 89% | 89% | 88% | 87% |
| Transfer time | 16 ms | 16 ms | 16 ms | 16 ms |
| Search mode (typical) | 5 watts | 7 watts | 7 watts | 7 watts |
| no Charge ( 120 VAc output, typical) | 25 watts | 25 watts | 30 watts | 25 watts |
| Waveform | Pure Sine Wave | Pure Sine Wave | Pure Sine Wave | Pure sine wave |
| Charger specifications | ||||
| Continuous output at 25°C | 100 ADC | 100 ADC | 125 ADC | 105 ADC |
| Magazine efficiency | 85% | 85% | 85% | 85 % |
| Power factor | >.95 | >.95 | >.95 | >.95 |
| Input current at rated output (AC amps) | 15 | 15 | 18 | 29 |
| General Features and Capabilities | ||||
| Forwarding Relay Capability | MS2000: 30 A single input MS2012, MS2812, MS4024: 2 branches at 30 A for 120 V/30 A or 240 V/60 A service | |||
| Five-stage charging capacity | Bulk, Absorb, Float, Equalize (requires remote control ) and Battery Saver™ | |||
| Battery temperature compensation | Yes, 15 foot battery temperature sensor standard | |||
| Remote control available (optional) | Yes, MM-RC or ME-RC | |||
| Internal cooling | 0 to 120 cfm variable speed drive using two 92 mm brushes Fanless DC fans | |||
| Protectionagainst overcurrent | Yes, with superimposed circuits | |||
| Protection against overheating | yes on transformer, MOSFETS and battery | |||
| Compliant coating on PCBs for corrosion protection | Yes | |||
| Powder coated chassis and top for corrosion protection | Yes | |||
| Stainless steel fasteners for corrosion protection corrosion | Yes | |||
| AC Bypass Dual Rated Output Circuit Breakers | 20A on MS2000-20B | |||
| Lists | ETL listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, conforms to KKK-A-1822E | |||
| Warranty | 3 years | |||
| Environmental specifications | ||||
| Operating temperatures | -20° C to +60° C (-4° F to 140° F) | |||
| Non-operating temperature | -40° C to +70° C (-40° F to 158° F) | |||
| Operating humidity | 0 to 95% RH non-condensing | |||
| Physical specifications | ||||
| Dimensions (l x w x h) | 13.75? x 12.65? x 8.0 (34.9 cm x 32.1 cm x 20.3 cm) | |||
| Mounting | Shelf (top or bottom up) or partition (vents up) | |||
| Weight | 40 lb | 42 lb | 55 lb | 55 lb |
Features Even at low AC voltage, the sine wave charger can charge the battery efficiently and the upgraded sine wave inverter can save costs. The battery temperature sensor can be used in conjunction with the charger to achieve the best charging effect. The MS series offers three power models as well as 12 volt and 24 volt configurations. Flash programming makes memory upgrades easy. Multifunctional installation: This model can be installed on shelves, partitions or even upside down. Lightweight base and cover can reduce noise and resist corrosion. The MS series provides multiple ports, including an RS485 communication port for network expansion, a remote port accessible design, and convenient 50A pass-through service via application switch.suitable for all models.
Frequently Asked Questions (FAQ) about the Magnum MS2012L 2000W 12V Inverter with 100A PFC Charger Who is the Magnum?
How to describe the Magnum MS2012L 2000W 12V Inverter with PFC 100 A charger?
Who is the Magneuh? Magnum Energy is a leading North American manufacturer of inverter/battery chargers, inverter accessories, enclosures, circuit breakers, fuse block assemblies, mini panels, conduit boxes, expansion boxes and other system products. - for mobile applications including utilities, RVs and marines; renewable energy applications and the export market. Manufactured in Everett, Washington, and St. Paul, Minnesota, they boast more than 150 years of combined inverter design and manufacturing experience. Magnum Energy uses advanced techniques to build some of the world'ss most reliable, most advanced and most durable. inverter and chargers for off-grid solar energy solutions. How to describe the Magnum MS2012L 2000W 12V Inverter W/100A PFC Charger? Features Even at low AC voltage, the sine wave charger can charge the battery efficiently, and the upgraded sine wave inverter can save costs. The battery temperature sensor can be used in conjunction with the charger to achieve better charging effect. The MS series offers three power models as well as 12 volt and 24 volt configurations. Flash programming makes memory upgrades easy. Multifunctional installation: This model can be installed on shelves, partitions or even upside down. Lightweight base and cover can reduce noise and resist corrosion. The MS series provides multiple ports, including an RS485 communication port for network expansion, a conception accessible via remote port and convenient 50A transmission service per switch applicable to all models.
Save $532 when you purchase the Magnum MS2012L 2000W 12v Inverter with 100A PFC Charger for only 1,849 $at NVN Marin! Free same day delivery before 3 p.m. Magnum MS2012L 2000W Inverter 12v W/100A PFC Charger Technical Specifications
| Type: | Electric | Inverters |
|---|---|
| Supplier: | Magnum |
| Weight: | 49.0 lbs |
| Shipping Weight: | 49.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) ) |
| Cubic feets: | 1.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
| Delivery by truck: | Yes |
- Magnum MS2000L 2000W 12V Inverter with 100A PFC Charger
- Magnum MS2000-20B 2kW 12V Inverter with PFC Charger 100A 20A Brk
- Magnum MMS1012 1000W 12V Inverter with 50A PFC Charger
- Magnum MM-RC25 6 LED Remote Control with 25' Cable
- Magnum ME3112 3100W 12v inverter with 160A PFC charger
- Magnum ME2512 2500W 12V Inverter with 120A PFC Charger
- Magnum ME2012 2000W 12V Inverter with 100A PFC Charger
