NavPod GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard Boat Outfitting

GP1900-09 Pre-cut SailPod for Raymarine c95/c97/e95/e97 for 9.5" wide protection

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter at the helm. where you can easily use it and clearly see the smallest details of the screen, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel-chrome plated screws provide a little bling and a lot of. Safety Designed with a double-seal waterproof seal, NavPods protect your electronics from the harshest offshore sailing conditions. It is best to mount a SailPod on a single-curvature AngleGuard or use a double-curvature AngleGuard. install an InstrumentPod on theupper vertical section and a SailPod below on the inclined section.

Structural rigidity
Gen3 improvements now include a thicker gauge acrylic cap. ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand harsh conditionsmost difficult and wet offshore navigation. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3 we provide tamper proof nickel plated chrome stainless steel screws for added security combined with a little bling!

Commitment to deliverys quality
We are committed to producing high quality waterproof enclosures for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

SailPod for Power is intended for mounting on a Stachion SK135 kit and can be used to mount a SailPod to a surface plane, such as the flybcrest. Stachion kits can also be used with a SailPod for high mount applications.

GP1900-09 SailPod Precut Parts SailPod for Raymarine c95/c97/e95/e97 for 9.5 inch wide shields are used to mount a single radar or chart plotter to the helmet. Fingertip navigation...
PRODUCT ID: 63800
SKU: NVN-63800
CSKU: CWR-63800
REWRITE: 74911-navpod-gp1900-09-sailpod-pre-cut- f-raymarine -c95-c97-e95-e97-f-9-5
MPN: GP1900-09
UPC: 659988110975
ASIN: B0753K9KBD
WSKU: NAVGP190009
SSKU:
KSKU:
GSKU:
MSKU:
LSKU :
NAME: NavPod GP1900-09 SailPod pre-cut for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR RAYMARINE C95/C97, E95/E97
PTITRE: NavPod GP1900-09 SailPod Pre-Cut f/Raymarine c95/c97/e95/e97 f/9.5" Wide Guard
TYPE: Boat fittings | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Gp1900-09 sailpod pre-cut f/raymarine c95 /c97/e95/e97 f/9.5 inc

Gtags:

Boat

GSpecs:

NavPod GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard Product Description GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 for 9.5" Wide Guard "

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPodon a single curvature AngleGuard or use a double curvature AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

Structural Rigidity
Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This joint offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide vis tamper proof stainless steel nickel plated chrome plated for added security combined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof cases for Marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

SailPod for Power is for mounting on a Stachion SK135 kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion kits can also be used with a SailPod for high mount applications.

GP1900-09 SailPod Precut Parts SailPod for Raymarine c95/c97/e95/e97 for 9.5 inch wide shields are used to mount a single radar or chart plotter to the helmet. Fingertip navigation...

FoAsk questions (FAQ) about the NavPod GP1900-09 SailPod Pre-Cut for Raymarine c95/c97/e95/e97 f/ 9.5" Wide Guard Who is the NavPod?
How to describe the NavPod GP1900-09 SailPod Pre -Cut f/Raymarine c95/c97/e95/e97 f/9.5" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod GP1900- 09 SailPod Pre-Cut f/Raymarine c95/c97/e95/e97 f/9.5" Wide Guard?
Who is the NavPod? Navpod It's a better way to mount your fishfinder, radar or GPS. The waterproof seal Unique, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for added security and. convenience, concealed wiring and clean installation for easy access How to describe the NavPod GP1900-09 SailPod Pre-Cut f/Raymarine c95/c97/e95/e97 f/ 9.5" protection.wide ? SailPod GP1900-09 SailPod pre-cut parts for Raymarine c95/c97/e95/e97 for 9.5 inch wide shields are used to mount a single radar or chartplotter to the helmet. Fingertip navigation...Is it cut or uncut? How to mount or what is the mounting style of NavPod GP1900-09 SailPod Pre-Cut f/Raymarine c95/c97/e95/e97 f/9.5" Wide Guard? Pedestal

Save $103 when you purchase the NavPod GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard for only $336at NVN Marine! Same day dispatch before 3:00 p.m. NavPod GP1900-09 SailPod Pre-Cut f/Raymarine c95/c97/e95/e9.7 f/9.5" Wide Guard Technical specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting style:	Pedestal

NavPod GP1900-09 Pre-cut SailPod for Raymarine c95/c97/e95/e97 f/9, 5" Wide Guard User ReviewsNavPod GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard Shipping & Return