NavPod GP2170-14 SystemPod pre-cut for Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole) for 12" wide protection Boat Outfitting

GP2170-14 Pre-cut SystemPod for Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole) for 12" wide protection

NavPod GP2170 series for protection 12" SystemPods are intended for mounting multiple electronics in a single NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller or VHF mic. It is best to mount a SystemPod on a single-curvature AngleGuard. The single-curvature AngleGuard for this model is the AG218.

SystemPods for power are intended for mounting on a Stachion SK135 kit and can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion kits can also be used with a SailPod for overhead mounting applications. .

The high gloss material
NavPods shave manufactured with a custom co-extruded. ABS material coated with acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The Waterproof Seal
All NavPods are manufactured with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to openthe NavPod in the future to maintain your electronic devices.

Nickel-chrome plated screws
We use all stainless steel mounting hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we supply nickel plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered a art since many processes come into play. play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce toolingquality with precision tolerances.

Our Commitment to Quality
We are committed to producing the best possible marine waterproof case. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

NavPod GP2170 series, used in 12 inch protective covers, SystemPods can be installed all multiple electronic devices in one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also leave space to install autopilots, musical instruments, stereo controllers or VHF microphones. It is best to install the SystemPod on a single AngleGuardelbow. The single elbow AngleGuard in this model is the AG218. SystemPods for power supply are used for installation on the SK135 Stachion kit and can be used to install the SystemPod on a flat surface
PRODUCT ID: 63813
SKU: NVN-63813
CSKU: CWR-63813
REWRITE: 74924-navpod-gp2170-14-systempod-pre-cut-f-raymarine-es95-es97-es98
MPN: GP2170-14
UPC: 659988111729
ASIN: B0753F2GD8
WSKU: NAVGP217014
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP2170-14 Pre-Cut SystemPod for Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole)f/12" Wide Guard
NAME_EX: NAVPOD SYSTEMPOD PRE-CUT FOR RAYMARINE ES95/ES97/ES98 AND
PTITLE: NavPod GP2170-14 SystemPod Pre-Cut f/Raymarine eS95/eS97/eS98 and 4 Instrument Holes (3.6" Hole) f/12" Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> ELMARINE ECTRONICS

NAVPOD systempod precut for raymarine es95/es97/es98

Gtags:

GSpecs:

NavPod GP2170-14 SystemPod pre-cut for Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole) for 12" wide protection Product description GP2170-14 SystemPod pre-cut for Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole) for 12" wide protection

NavPod GP2170 Series for 12" protection, SystemPods allow multiple electronic parts to be mounted in a single NavPod This is a good way to Reduce the height of a system In addition to mounting a radar or chart plotter, you can have room for an autopilot, instrument, stereo controller or. VHF microphone It is best to mount a SystemPod on a single curvature AngleGuard for this the model is the AG218.

The SystemPods for power are intended for mounting on a Stachion SK135 kit. used to mount a SystemPod on a flat surface, such as the flybridge Stachion kits can equal.Can be used with a SailPod for overhead. mounting applications.

High gloss material
NavPods are made with a custom co-extruded acrylic plated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thickerand is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all steel mounting hardware stainless steel supplied with each NavPod. Large Roll Pan Head Tamper Proof Screws have deeper sockets for the NavPod Wrench for better holding ability when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers who use softwareCAD software such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

NavPod GP2170 series, used in 12-inch protective covers, SystemPods can install multiple electronic devices in one NavPod. This is a good way to reduce the height of the system. In addition to installing a radar or chartplotter, you can also leave space to install autopilots, inmusical instruments, stereo controllers or VHF microphones. It is best to install the SystemPod on a single elbow AngleGuard. The single elbow AngleGuard in this model is the AG218. SystemPods for power supply are used for installation on the SK135 Stachion kit and can be used to install the SystemPod on a flat surface

Frequently Asked Questions Questions (FAQ) About NavPod GP2170-14 SystemPod pre-cut f/Raymarine eS95/eS97/eS98 and 4 instrument holes (3.6" hole) f/12" Wide Guard Who is the NavPod?
How Describe NavPod GP2170-14 SystemPod Pre-Cut f/Raymarine eS95/eS97/eS98 and 4 Instrument Holes (3.6"; Hole) f/12" Wide Guard?
Is it cut or uncut?
br/> How to mount or what is the mounting style of the NavPod GP2170-14 SystemPod Pre-Cut f/Raymarine eS95/eS97/eS98 & 4 instrument holes (3.6" hole f/12" wide?
Who is the NavPod? The Navpod isa better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make this an attractive product. The best built instrument case ever available in the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod GP2170-14 SystemPod Pre-Cut f/Raymarine eS95/eS97/eS98 and 4 Instrument Holes (3.6" hole) f/12" Wide Guard? NavPod GP2170 series, used in 12-inch protective covers, SystemPods can install multiple electronic devices in one NavPod. It is a good way to reduce the height of the system in addition to installing it. By using radar or chart plotter, you can also leave space to install autopilots, instruments, stereo controllers or VHF microphones. It is best to install the SystemPod on a single elbow AngleGuard. The single elbow AngleGuard in this model is the AG218. SystemPods for power supply are used for installation on the SK135 Stachion kit and can be used to install the SystemPod on a flat surface. Is it cut or uncut? Cut

$125

NavPod GP2170-14 SystemPod pre-cut for Raymarine eS95/eS97/eS98 and 4 instrument holes (3, 6") f/12" Wide Guard

$404

Type:	Boat Equipment \| Display Mounts
Provider:	NavPod
Cut/Uncut:	Couped
Mounting style:	Pedestal

For detailed shipping policy, please see our shipping policy and you can find our return policy and refund here.