NavPod PP4600-01 Pre-Cut PowerPod for Garmin echoMAP 92sv/93sv/94sv/95sv - Carbon Black Boat Outfitting

PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black

PowerPods are designed for serious offshore boaters. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the dodger or aft end of the cockpit table, particularly on ju wheel boats.

High gloss material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "decompression"finished" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. The large round head tamper-proof screws have deeper sockets for the NavPod key for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catia andAutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63932
SKU: NVN-63932
CSKU: CWR-63932
REWRITE: 75043-navpod-pp4600-01-powerpod-pre-cut-f-garmin-echomap-92sv- 93sv-94sv-95sv
MPN: PP4600-01-C
UPC: 659988112290
ASIN: B07R6M9R1B
WSKU: NAVPP460001C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR GARMIN ECHOMAP 92SV /93SV/94SV/
PTITRE: NavPod PP4600- 01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black
TYPE: Boat Equipment | Display Media
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp4600-01 powerpod pre-cut f/garmin echomap 92sv/93sv/94sv/95s

Gtags:

GSpecs:

NavPod PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black Product Description

PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black

PowerPods are designed for serious boaters who go offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a surfacee plane. Perhaps under the cubbyhole or aft end of the cockpit table, particularly on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with a snug fit.improved flush. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to be able to count ons experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will have trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about NavPod PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black Who is the NavPod?
How to describe the NavPod PP4600-01 Pre-Cut PowerPod f/Garmin echoMAP™ 92sv/93sv /94sv/95sv - Carbon Black?
Is it cut or uncut?
How or what is the mounting style of the NavPod PP4600-01 PowerPod Pre-Cut f/Garmin echoMAP™ 92sv/93sv/ 94sv/95sv - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make it the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4600-01 PowerPod Pre-Cut f/Garmin echoMAP™ 92sv/93sv/94sv/95sv - Ducarbon black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut

$105

NavPod PP4600-01 Pre-Cut PowerPod for Garmin echoMAP™ 92sv/93sv/94sv/95sv - Carbon Black

$314

Type:	Equipment of boat \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Dash

For detailed shipping policy, please visit our shipping policy and you can find our return and refund policy here.