NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820 820xs 840 and 840xs - Carbon Black Boat Outfitting

PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black

PP4800 Series, the PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. PePerhaps under the hood or aft of the cockpit table, especially on twin wheel boats.

Brilliant material

NavPods are made with a custom co-extruded ABS material with an acrylic cap. NavPod uses the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for protection. of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal seal EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Nickel-chrome plated screws

NavPod uses All stainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide tamper proof nickel plated stainless steel screws for added security combined with a little bling!

Manufacturing Process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with design and tool development. NavPod is fortunate to have experienced in-house design engineers who useThey use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. NavPod has redesigned and revamped all popular NavPods. NavPod looked at all the old products, selected the best design elements from each, and incorporated them into every Gen3 product.

Commitment to quality

NavPod is committed to producing the best possible waterproof enclosure for marine electronics. With now two decades of experience under our belt, NavPod is confident that you will benefit from years of trouble-free service and a long-lasting, glossy finish.

Compared to installation in rack, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63940
SKU: NVN-63940
CSKU: CWR-63940
REWRITE: 75051-navpod-pp4800-12-powerpod-pre-cut-f-garmin-gpsmap-820
MPN: PP4800-12-C
UPC: 659988112375
ASIN:
WSKU: NAVPP480012C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 & 840xs - Carbon Black
NAME_EX: PRE-CUT NAVPOD POWERPOD FOR GARMIN 820/820XS/840/840XS
PTITRE: NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Powerpod pre-cut f/garmin gpsmap 820, 820xs , 840 , 840xs - carb

Gtags:

GSpecs:

NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black Product Description

PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black

PP4800 Series, PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

PowerPods for Sail are intended to be mounted on a flat surface. P.perhaps under the hood or aft of the cockpit table, especially on twin wheel boats.

High gloss material

NavPods are made with custom co-extruded acrylic coated ABS material. NavPod uses the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for protection. of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. The friendsGen3 liorations include a thicker silicone outer seal with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

The NavPod uses all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide tamper proof nickel plated stainless steel screws for added security combined with a little bling!

Manufacturing Process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with designand the development of tools. NavPod is fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. NavPod has redesigned and revamped all popular NavPods. NavPod looked at them all and selected the best design elements from each and incorporated them into every Gen3 product.

Commitment to quality

Compared to installation in rack, PowerPods for Power are a better choice. PowerPods have the advantage of having a brotating base, which can provide a streamlined appearance for built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black Who is the NavPod?
How to describe the NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black?
Is it cut or uncut?
How to mount or What is the mounting style on NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security andconvenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4800-12 PowerPod Pre-Cut f/Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP4800-12 PowerPod Pre-Cut f/Garmin GPSMAP 820, 820xs, 840 & 840xs - Carbon Black? Ceh

Save $115 when you purchase the NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black for only $374 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Black Technical Specifications

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod
Weight:	5.8 lbs
Cut/Uncut:	Coupe
Mounting style:	Dashboard

NavPod PP4800-12 Pre-Cut PowerPod for Garmin GPSMAP 820, 820xs, 840 and 840xs - Carbon Blackk Shipping & Returns

Shipping Weight:	5.8 lbs
Box Sizes:	9.00 (h) x 13.00 (l) x 14.00 (l)
Cubic feet:	1638.0
Returnable:	Yes

To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.