NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8" Boat Outfitting

PP4900-02 Pre-cut PowerPod for the Humminbird ONIX 8" series

For Humminbird model ONIX8CI, ONIX8CI SI, ONIX8CI NT, ONIX8CI NT SI

The PP4900 series, PowerPods for power supply are a better option than bracket mounting. They offer a sleek look for flush mounting with the advantage of a swivel base.

The bracket mount. trunnion supplied with most electronic devices is. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from intrusion. water box with sealed rubber push buttons I expect you to flush it into the console or a NavPod The PowerPod also protects the plastic connectors and wires from deterioration caused by exposure to. long term UV exposure.

The PowerPods for Sail are intended to be mounted on a flat surface under the lid.nard or aft of the cockpit table, especially on boats with dual wheels.

High gloss material

NavPods are Made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The inner sealerne EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electr.onics.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on design engineersExperienced in-house ption who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for Marine Electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59317
SKU: NVN-59317
CSKU: CWR-59317
REWRITE: 70428-navpod-pp4900-02-powerpod-pre-cut-f-humminbird-onix-8
MPN: PP4900-02
UPC: 659988110883
ASIN: B07TZ58VTW
WSKU: NAVPP490002
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX 8" series
NAME_EX: NAVPOD PP4900-02 Pre-cut POWERPOD for HUMMINBIRD ONIX
br> PTITRE: NavPod PP4900-02 Pre-cut PowerPod f/Humminbird ONIX 8" series
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP4900-03 PowerPod Pre-Cut for Lowrance Elite- 9 CHIRP

Gtags:

GSpecs:

NavPod PP4900-02 Pre-cut PowerPod for Humminbird ONIX 8" series Product description PP4900-02 Pre-cut PowerPod for Humminbird ONIX 8" series

For Humminbird model ONIX8CI, ONIX8CI SI, ONIX8CI NT, ONIX8CI NT SI

PP4900 series, PowerPods for power supply are a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from thedeterioration caused by long-term UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on boats with dual wheels.

The shiny material

NavPods are made with a custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand navigation conditionsn the most difficult and wet offshore. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future p032.01 to service your electronic devices.

Chrome nickel plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered a fine artThere are many processes involved. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . The PowerPod have the advantage of having a rotating base, which can provide a streamlined appearance for built-in installation. The latest industry...

Frequently Asked Questions (FAQ) about the NavPod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8" Who is the NavPod ?
How to describe NavPod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8"?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4900 - 02 Pre-Cut PowerPod f/Humminbird ONIX Series 8"?
Who is the NavPok? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the case best-built instrument panel ever available for the marine industry Features of all Navpods include waterproof silicone seal, tamper-evident clips for added security and convenience, concealed wiring and clean installation for.easy access. How to describe the NavPod PP4900-02 PowerPod Pre-Cut f/Humminbird ONIX 8" Series? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for a built-in installation...Is it cut or uncut?How to do this or what is the mounting style of the NavPod PP4900-02 PowerPod Pre-Cut f/Humminbird ONIX. 8" Series? Dash

Save $115 when you purchase the NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX 8" Series for only 374 $ from NVN Marine! Same day shipping before 3 p.m. NavPod PP4900-02 Pre-cut PowerPod f/Humminbird ONIX series 8" Technical specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Pulled

NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8" Reviews UsersNavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8" Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.