NavPod PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4" Boat Outfitting

PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4"

PowerPods are designed for serious boaters who blast at wide It demands the most from its boat and its electronics It needs a strong and sturdy support to protect the vital electronics from the harshest offshore sailing conditions, but clean and attractive, the PowerPods are better than the. bracket mounting. -Cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a rearward tilted viewing angle of 20 degrees.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the hood or aft of the cockpit table, especially on dual wheel boats. The shiny material

NavPods are mades with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a very high gloss finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to maintain your electronic devices.

Nickel-chrome plated screws

We use all stainless steel mounting hardware supplied with each NavPod. The large round head tamper-proof screws have deeper sockets for the NavPod wrench to better maintain flexibility when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce toolsquality with precision tolerances.

Our Commitment to Quality

We are committed to producing the best possible waterproof enclosure for the marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

ComCompared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 63968
SKU: NVN-63968
CSKU: CWR-63968
REWRITE: 75079-navpod-pp5060-01-powerpod-pre-cut-f- humminbird-ion-10-4
MPN: PP5060-01
UPC: 659988112672
ASIN:
WSKU: NAVPP5060
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: NavPod PP5060-01 Pre-Cut PowerPod f/Humminbird ION 10.4"
EX_NAME: NAVPOD PRE-CUT POWERPOD FOR HUMMINBIRD ION SERIES ION 10
PTITLE: NavPod PP5060- 01 Pre-Cut PowerPod f/Humminbird ION 10.4"
TYPE: Boat Equipment | Display Stands
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pre-Cut Powerpod f/humminbird ion 10.4 inch
br>
Gtags:

GSpecs:

NavPod PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4" Product Description

PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4"

PowerPods are designed for serious boaters who cruise offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the Dodger or the rear end.re of the cockpit table, especially on twin-wheel boats. The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches the gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker andis not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware provided with each NavPod. Large Round Head The tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use design programs.e CAD such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will stand behind our communication by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...

Frequently Asked Questions (FAQ) about NavPod PP5060-01 Pre-Cut PowerPod f/Humminbird ION 10.4" Who is the NavPod?
How to describe NavPod PP5060-01 Pre-Cut PowerPod f/Humminbird ION 10.4"?
Is it cut or not?
How to mount or what is the mounting style of the NavPod PP5060-01 PowerPod Pre-Cut f/Humminbird ION 10.4"?
Who is the NavPod? The Navpod is a better way to mount your fishfinder, radar or GPS. The NavPod is a better way to mount your fishfinder, radar or GPS. Unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof, tamper-proof silicone seal.teners for safety and security. convenience, hidden wiring and clean installation for easy access How to describe the NavPod PP5060-01 PowerPod Pre-Cut f/Humminbird ION 10.4"? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for inintegrated stall. The latest industry...Is it cut or uncut How to mount or what is the mounting style of NavPod PP5060-01? Pre-Cut PowerPod f/Humminbird ION 10.4"? Dash

Save $137 when you purchase the NavPod PP5060-01 Pre-Cut PowerPod f/Humminbird ION 10, 4"for only $412 from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4"

Type:	Boat Outfitting \| Display Mounts
Provider:	NavPod
Cut/Uncut:	Cut
Editing style:	Dash

NavPod PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4" User ReviewsNavPod PP5060-01 Pre-Cut PowerPod for Humminbird ION 10.4" Shipping and Returns

To know Detailed shipping terms, please consultour shipping policy and you will find our return and refund policy here.