NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black Boat Outfitting

PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black

PP5200 series, PowerPods for power are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the dodger oron the rear of the cockpit table, especially on twin wheel boats.

All PowerPods include:

Acrylic coverABS plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronics
Swivel base with large passage for cable harness

For the PP5200 series, the PowerPods for Power are a better choice than the installation support. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion mount that comes with most electronic products is not the best choice. The advantage of PowerPods is that they can protect the back of electronic devices from salt water. Most manufacturers use sealed rubber buttons to protect the surface perfectly.e screen against water intrusion. The back is generally not waterproof. They want you to install it directly into the console or NavPod. PowerPod can also protect plastic connectors and wires from degradation caused by long-term exposure to ultraviolet light. The Power of SailModules are used for installation on flat surfaces. Perhaps in the dodge or behind the cockpit table, especially on a two-wheeler, all PowerPods include: an ABS acrylic plastic cover, chrome-plated stainless steel tamper-proof clips, double sealing for waterproof integrity, can be pre-cut templates. of popular electronic products, rotating bases with large through-holes for wiring harnesses.
PRODUCT ID: 63974
SKU: NVN-63974
CSKU: CWR-63974
REWRITE: 75085-navpod-pp5200-01-powerpod-pre-cut-f-humminbird-helix-12
br> br> MPN: PP5200-01-C
UPC: 659988112740
ASIN: B07XLQNQ5N
WSKU: NAVPP520001C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5200-01 Pre-Cut PowerPod f/Humminbird HELIX 12 - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR HUMMINBIRD HELIX 12
PTITLE: NavPod PP5200-01 Pre-Cut PowerPod f/Humminbird HELIX 12 - Carburetors on black
TYPE: Boat fittings | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Pp5200-01 powerpod pre-cut f/humminbird helix 12 - black carbon

Gtags:

GSpecs:

NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black Product Description PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black

PP5200 Series, PowerPods for the Humminbird HELIX 12 Power supply is a better option than rack mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

Thes PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table especially on twin wheel boats.

All PowerPods include:

ABS plastic with acrylic cap
Chrome-plated stainless steel tamper-proof fasteners
Double seal for waterproof integrity
The models are available pre-cut for popular electronic devices
Swivel base with large passage for wiring harness

For the PP5200 series, the PowerPods for Power are a better choice than mounting on a stand. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion mount that comes with most electronic products is not the best choice. The advantage of PowerPods is that they can protect the back of electronic devices fromsalt water. Most manufacturers use sealed rubber buttons to perfectly protect the screen surface from water intrusion. The back is generally not waterproof. They want you to install it directly into the console or NavPod. PowerPod can also protect plastic connectors and wires from degradation caused by long-term exposure to ultraviolet light. Sail PowerPods are used for installation on flat surfaces. Perhaps in the dodge or behind the cockpit table, especially on a two-wheeler, all PowerPods include: an ABS acrylic plastic cover, chrome-plated stainless steel tamper-proof clips, double sealing for waterproof integrity, can be pre-cut templates. of popular electronic products, rotating bases with large through-holes for wiring harnesses.

Frequently asked questionsions (FAQ) about the NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black Who is the NavPod?
How to describe the NavPod PP5200-01 PowerPod Pre-Cut f/Humminbird HELIX 12 - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP5200-01 PowerPod Pre-Cut -Cut f/Humminbird HELIX 12 - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5200-01 PowerPod Pre-Cut f/Humminbird HELIX 12 - Carbon Black? For the PP5200 series, PowerPods for Powerare a better choice than rack installation. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The trunnion mount that comes with most electronic products is not the best choice. The advantage of PowerPods is that they can protect the back of electronic devices from salt water. Most manufacturers use sealed rubber buttons to perfectly protect the screen surface from water intrusion. The back is generally not waterproof. They want you to install it in the console or NavPod. PowerPod can also protect plastic connectors and wires from degradation caused by long-term exposure to ultraviolet light. Sail PowerPods are used for installation on flat surfaces. Perhaps in the dodge or behind the cockpit table, especially on a two-wheeler, all PowerPod include: ABS acrylic plastic cover, chrome stainless steel tamper evident clips, double sealing for leak-proof integrity, can be pre-cut designs. of popular electronic products, rotating bases with large through-holes for wiring harnesses. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP5200-01 PowerPod Pre-Cut f/Humminbird HELIX 12 - Carbon Black? Dash

Save $127 when you purchase the NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black for only 412 $from NVN Marine! Same day dispatch before 3 p.m. NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black Technical Specificationsons

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut :	Couped
Mounting style:	Dash

NavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black User ReviewsNavPod PP5200-01 Pre-Cut PowerPod for Humminbird HELIX 12 - Carbon Black Shipping & Returns

For know the detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.